Hi Amos, What input mode are you using?
Try switching to "support" mode and see if the charging current increases. On Wed, Oct 25, 2023, 1:24 PM Amos Post via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Hello wrenches, > > We just installed an GS8048a Radian build with Mate 3SL controller (no > Optics). We are having some with charging from the generator, as the > generator charging seems to be limited to about 4500Watts +/- (20amps AC) > when charging through the Radian. It is a Kohler 8.5RES generator and we > have the AC input limit set to 30amps and the Gen input set to 30amps. The > house load is only about 200Watts when we are charging. The system is at > 2200ft of elevation, but I don’t know if that makes enough of a difference. > The Gen output voltage seems pretty good and holds around 234V-236V while > charging. > > Any thoughts as to why it may be limiting would be appreciated. > > Thanks, > Amos > > > Amos Post > Integrity Energy > W 802.763.7023 > C 802.291.2188 > ienergyVT.com <http://www.ienergyvt.com> > Facebook <https://www.facebook.com/integrityenergyllp?ref=hl> > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org