I was out at the job site today with the customer with the old SI 4548. It’s going away, primarily because she wants a mini split and her inverter is too small at this point.
She has of course a abosolyte battery, 6 cells per stack. I don’t know if they will slide out or not. But just thought I’d ask if anyone has any tricks. Oh and no it’s in a side room, no way to get any heavy equipment in there, and each stack is about 600# Maybe I could get an engine hoist in there, but outside the door is dirt and gravel and its a long ways to where I can put the trailer. I am anticipating having to remove the cells to deal with it. Cutting it apart with a right angle grinder is about the only trick I know. But I’m guessing there are others. Fortunately I can install the new equipment on the other wall so I don’t need to get the batteries out quickly. thanks in advance jay _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
