If it’s not too steep you can continually leapfrog two or 3 pieces of plywood, and roll your engine dolly on that. Or you can use a few cuts of large diameter pipe as rollers.
On Thu, Jul 17, 2025 at 3:33 PM jay via RE-wrenches < [email protected]> wrote: > I was out at the job site today with the customer with the old SI 4548. > It’s going away, primarily because she wants a mini split and her inverter > is too small at this point. > > She has of course a abosolyte battery, 6 cells per stack. > I don’t know if they will slide out or not. > > But just thought I’d ask if anyone has any tricks. > Oh and no it’s in a side room, no way to get any heavy equipment in there, > and each stack is about 600# > > Maybe I could get an engine hoist in there, but outside the door is dirt > and gravel and its a long ways to where I can put the trailer. > I am anticipating having to remove the cells to deal with it. > Cutting it apart with a right angle grinder is about the only trick I > know. But I’m guessing there are others. > > Fortunately I can install the new equipment on the other wall so I don’t > need to get the batteries out quickly. > > thanks in advance > > jay > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
