Re: [RE-wrenches] removing old abosolyte cells.

[Jay via RE-wrenches]

Hi Mac Someday I’ll get a battery replacement where I can just drive the truck to the batteries. Or have a nice flat smooth concrete path to use those nice tools that have been mentioned.  Not this job.  Definitely going to need a few strong laborers  Jay On Jul 17, 2025, at 7:17 PM, Mac Lewis via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote:  Hi Jay, Depending what the floor path looks like, I've used a very narrow pallet jack to move full stacks quite easily, or perhaps rotate to a better angle.  That may allow you to get them somewhere where you can snatch them with heavy equipment.  I have used the narrow pallet jack all over the place, super helpful. Good Luck! Mac Lewis "Yo solo sé que no sé nada." -Sócrates On Thu, Jul 17, 2025, 3:09 PM jay via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote: Hi James, I this case the cells on only 4 high so they are all low which is an advantage, not so far to drop! I think I can build a platform just out of wood etc that I can slide them out onto if they slide out. which thanks to Chris I think I can do it. cheers everyone jay On Jul 17, 2025, at 2:38 PM, James Jarvis via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote: Somebody was kind to you that specified those cells. Use a "Big Joe" type manual forklift and bring the platform up to the battery height and slide the cells out. Once near the ground you can just hand carry them.  Two people can wrestle those out, even from the top cells, but it is real work. I use to do about 10k lbs of those in a day before being too exhausted. We routinely do 18k lb Absolyte battery loads with four people carrying the batteries from the helicopter landing zone and into the building. Four people hustling it usually takes a bit over an hour. -James Jefferson Jarvis APRS World, LLC +1-507-454-2727 http://www.aprsworld.com/ On Thu, Jul 17, 2025 at 3:27 PM jay via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote: Yes.  Absolyte GP 90G18   6 x 2v cells per stack 4 stacks weight is about 100# per cell, or roughly 700# per stack.  On Jul 17, 2025, at 2:22 PM, Chris Schaefer <ch...@solarandwindfx.com> wrote: Hey Jay, Does this look like what you are dealing with? Christopher On Thu, Jul 17, 2025 at 4:14 PM jay via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote: I’ll give that some thought.   It’s too steep and narrow but it’s not too far to the road which maybe I could just pull them with the nearby tractor and a long rope.   thanks On Jul 17, 2025, at 1:38 PM, david quattro <da...@quattrosolar.com> wrote: If it’s not too steep you can continually leapfrog two or 3 pieces of plywood, and roll your engine dolly on that.   Or you can use a few cuts of large diameter pipe as rollers.  On Thu, Jul 17, 2025 at 3:33 PM jay via RE-wrenches <re-wrenches@lists.re-wrenches.org> wrote: I was out at the job site today with the customer with the old SI 4548.  It’s going away, primarily because she wants a mini split and her inverter is too small at this point. She has of course a abosolyte battery, 6 cells per stack.  I don’t know if they will slide out or not. But just thought I’d ask if anyone has any tricks. Oh and no it’s in a side room, no way to get any heavy equipment in there, and each stack is about 600# Maybe I could get an engine hoist in there, but outside the door is dirt and gravel and its a long ways to where I can put the trailer. I am anticipating having to remove the cells to deal with it. Cutting it apart with a right angle grinder is about the only trick I know.  But I’m guessing there are others. Fortunately I can install the new equipment on the other wall so I don’t need to get the batteries out quickly. thanks in advance jay _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org -- Chris Schaefer’s Tel 585-229-2083 or Cell 585-748-1870  5115 S Hill Road ~ Canandaigua New York 14424 www.solarandwindfx.com ~ E-mail: ch...@solarandwindfx.com Thomas Jefferson, the author of our great Constitution, once said, "democracy" will cease to exist when you take away from those who are willing to work and give to those who would not." <20161129_115628.jpg> _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org