Here is the config for these files:
/etc/sysconfig/network-scripts/ifcfg-eth0
/etc/sysconfig/networking/devices/ifcfg-eth0

USERCTL=yes
PEERDNS=yes
TYPE=Ethernet
DEVICE=eth0
BOOTPROTO=dhcp
ONBOOT=yes
HWADDR= (the correct MAC is listed here)


--- Kenneth Goodwin <[EMAIL PROTECTED]> wrote:
> The network config tool may be broken,,   have you
> looked
> at the underlying //etc/sysconfig  network related 
> files?
> 
> 
> >  -----Original Message-----
> >  From: [EMAIL PROTECTED]
> >  [mailto:[EMAIL PROTECTED] Behalf Of
> Kelerion
> >  Sent: Thursday, August 07, 2003 1:06 PM
> >  To: [EMAIL PROTECTED]
> >  Subject: RE: Ethernet & DHCP Fails on Cable Modem
> to
> Internet
> >
> >
> >  Your not messing/playing around with a 2.5 or 2.6
> kernel
> are you?
> >
> >  I know from experience that dhcpclient breaks
> with those
> >  kernels.. The
> >  way I got around it was to set a static ip (also
> make
> sure
> >  your gateway
> >  is correct) and that should help..
> >
> >  Don't know if this is what your doing but it just
> sounded
> familiar to
> >  me..
> >
> >  HTH
> >
> >  Kel
> >
> >  -----Original Message-----
> >  From: [EMAIL PROTECTED]
> >  [mailto:[EMAIL PROTECTED]
> >  On Behalf Of Ken Plumley
> >  Sent: Thursday, August 07, 2003 4:36 PM
> >  To: Redhat List
> >  Subject: Ethernet & DHCP Fails on Cable Modem to
> Internet
> >
> >
> >  I am trying to setup an x86 box running red hat
> linux
> >  8.0 to reach the internet using a cable modem. I
> used
> >  the Network Configuration tool to configure eth0
> to
> >  automatically obtain
> >  IP address settings with DHCP and automatically
> obtain
> DNS
> >  information
> >  from the ISP. When I try to activate eth0 using
> the
> Network
> >  Configuration tool it fails with the message:
> Cannot
> activate network
> >  device eth0.
> >
> >  I can reach the internet using the same cable
> modem at
> >  the same location on a different machine running
> red
> >  hat 6.2 with eth0 configured for dhcp.
> >
> >  Can some one please tell me how to configure dhcp
> on
> >  RH 8.0 to work with the cable modem?
> >
> >  Thanks in advance.
> >
> >  Ken
> >
> >
> >  __________________________________
> >  Do you Yahoo!?
> >  Yahoo! SiteBuilder - Free, easy-to-use web site
> design
> software
> >  http://sitebuilder.yahoo.com
> >
> >
> >  --
> >  redhat-list mailing list
> >  unsubscribe
>
mailto:[EMAIL PROTECTED]
> > 
> https://www.redhat.com/mailman/listinfo/redhat-list
> >
> >
> >
> >  --
> >  redhat-list mailing list
> >  unsubscribe
>
mailto:[EMAIL PROTECTED]
> > 
> https://www.redhat.com/mailman/listinfo/redhat-list
> >
> 
> 
> -- 
> redhat-list mailing list
> unsubscribe
>
mailto:[EMAIL PROTECTED]
> https://www.redhat.com/mailman/listinfo/redhat-list


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com


-- 
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list

Reply via email to