I am currently having problems getting my RH 6.1 box to connect to my cable
internet service (Road Runner [Greensboro, NC]). Supposedly vanilla DHCP
should work ok but I'm having problems.
Here's what happens... I try to grab an IP using pump with:
pump -i eth0
shell spits out "Operation Failed."
ifconfig reveals after this that eth0 is not up (of course).
Likewise I fail when trying to use dhcpcd.
When I assign eth0 an ip on my internal network the interface comes up just
fine and I can ping around on my network so the card's hardware and setup
seem to be OK.
You can find a tcpdump here http://www.oppel.net/DHCP that I did while I did
a dhcpcd -H. Here's a short description of the RoadRunner network that I'm
trying to connect to:
DHCP & DNS1 - 24.28.227.64
DNS2 - 24.28.227.64
Gateway - 24.163.5.1
The subnet that I usually get an IP on is 255.255.255.192
Help would be greatly appreciated!
-Jason
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
