On Tue, 30 Jan 2001, Neil Hollow wrote:

> I'm a complete newbie on recompilation but I need to either patch or most
> probably upgrade from 2.2.5 to 2.4.0 since I do not have USB support (I want
> to buy an Epson stylus to go on this port) and no support for SCSI devices I
> want to buy a CD-RW.  I've downloaded the source for 2.4.0 but I have some
> questions.
>
You can also get USB support in 2.2.18.  As far as SCSI support, you can
get that with any version of the kernel.  If you are running one of the
stock RedHat kernels, you probably already have the SCSI modules.

With a 2.2.5 kernel, you have to be running 6.x, so you will have a lot
of upgrading to do if you want to run a 2.4.x kernel.  I would think
about upgrading to 7.0 if you want to run 2.4.x kernels.  If you stay
with 6.x, make sure you upgrade to the latest 6.2 RPMs.
>
> I assume I cannot patch things that are missing completely from 2.2.5, in
> from 2.4.0 source?
>
Nope.  But you can get what you want from 2.2.18.
>
> Will gcc version supplied with RH6.0 be OK to compile 2.4.0 source?
>
Yes.
>
> Is it possible in recompiling to take the bits you want to keep in the
> existing kernel?  I'm worried I may not check a box in Xconfig and lose
> somthing that works fine now.
>
If you stick to a 2.2.x kernel, you can run "make oldconfig".
>
> If I put in SCSI support as Modules how do set these up so they run
> automatically when required by the hardware/software? The pppd at the moment
> which loads when required on my system.
>
For a 6.x system, put an alias in /etc/conf.modules for your SCSI card.
Here is what I use for an Advansys card I use for my CD writer.  When I
try and access the writer, it loads the SCSI module.

alias scsi_hostadapter advansys

>
> Finally any advice on software for toasting and not coastin CDs would be
> nice.
>
> Hope this all makes sense.  NH.
>
>

Mikkel
-- 

    Do not meddle in the affairs of dragons,
 for you are crunchy and taste good with ketchup.



_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to