Well, if your rh box is connected directly hooked to the adsl router then hub, then the IP should be the one supplied by the isp.. the ip you have listed below is a private net ip, which you don't want to use.
On Fri, 2002-11-29 at 16:09, Joseph Teo wrote: > hey list, > > I just got a external dynalink adsl router connected to a hub with 2 > computers coming off. I can ping all machines in both windows and linux > environments. > > Currently, I have got my adsl connection working perfectly in windows but in > Redhat 7.3, i'm clueless in what i'm suppose to do in configuring the system > so that i can surf the net within linux. > > I changed the ip address on my machine to correspond to the one in windows > with the correct subnet. > > my settings are: IP: 192.168.1.20 > Subnet: 255.255.255.0 > > i setup a default route to my adsl router which is 192.168.1.1. > > Is there a command in linux which i'm suppose to configure and go through? > What else am i not doing or have done wrong? > > Joe > > > > -- > redhat-list mailing list > unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/redhat-list > -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
