No, I am considering moving my whole PC out into the room where the tank is
and getting some pics that way. My PC camera is not that great though. Not
only that, but I am not so sure my tank is amazing, or even impressive as
far as that goes!
Output depends. How big is the tank again??? If it is above a 29 gallon, I
would split em and put one on each side of the tank.
Powerheads will work for dead spots, but if you can do a closed loop, that
is the way to go. I have used closed loops on my tank, and I love it. If you
run one with a timer, you can turn the pump running the loop on and off to
create surges.
Shane C.
> -----Original Message-----
> From: Jose Arturo Perez Vera [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, October 10, 2001 11:05 AM
> To: '[EMAIL PROTECTED]'
> Subject: RE: Return from sump
>
> Shane:
>
> Did you find a solution about your USB to take some pictures of your
> setup?
>
> I think all the people involved in this list will be pleasure to see how
> amazing your tank is.
>
> By the way, Do you think only one ouput on the surface will be enough? I
> was thinkind on put 1 or 2 Powerheads pointing behind the rock structure
> to skip dead spots behind.
>
> Is this a good Idea? or maybe some closed loops in the tank?
>
> TIA.
>
> :-)
>
> -----Original Message-----
> From: Shane Clays
> To: '[EMAIL PROTECTED]'
> Sent: 10/10/01 11:57 AM
> Subject: RE: Return from sump
>
> You want your outputs at the top of the tank so if the power goes off,
> the
> water does not backflow and overflow the sump. You should be able to
> shut
> the pump off and let the tank drain until the siphon in the output
> breaks
> without overflowing the sump. You can put a small powerhead in the tank
> facing up towards the surface to help agitate it, and an output from
> your
> sump pump aimed across the top of the surface of the tank will help as
> well.
>
> Shane C.
>
> > -----Original Message-----
> > From: Jose Arturo Perez Vera [SMTP:[EMAIL PROTECTED]]
> > Sent: Wednesday, October 10, 2001 10:19 AM
> > To: '[EMAIL PROTECTED] '
> > Subject: Return from sump
> >
> > Hi !
> >
> > Can anybody tell me which is the best place to put the water again on
> the
> > tank from the sump?
> >
> > Any good ideas to get good circulation or surface agitation?
> >
> >
> > Thanks !
> >
> ________________________________________
>
> LEAVING THE LIST
> ================
> To stop receiving messages you will need to send a message to
> [EMAIL PROTECTED] with a command to remove you from the
> list. The list manager controls who belongs to the list.
>
> For example:
> --------------------------------------------------------------
> From: John Doe <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: <not needed>
>
> UNSUBSCRIBE
> --------------------------------------------------------------
>
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
