Rather than having the expense of landlines for the voter system, I want to
use receivers that is on 146.325 receive and have them transmit back to the
repeater via 902 MHZ, at least that is the way it was explained to me. I
have very little knowledge of voter systems, but am wanting to learn, and
gear up for it for when I start putting the pieces together, kinda like
building my business plan or a good set of blueprints.
Mathew
----- Original Message -----
From: "Coy Hilton" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Monday, May 03, 2004 7:34 PM
Subject: [Repeater-Builder] Re: Voters & Radios
> Mathew, After reading the posts it seems that your system is 146 Mhz
> in and 902 mhz cross band repeat. Running on that, my question is
> what transmitters are you concerned with? Is it the 146 MHZ that is
> the input or is it the 902 Mhz output Transmitters?
>
> If it is the 146 that is the input, there is nothing you can do
> about that.
>
> If it's the 902Mhz transmitter, think of it as seperate functions.
> The receivers, output goes to the voter. The output of the voter as
> such, can be treated as if it was a single receiver output to be
> interfaced with the transmitter/s. (are you going to be simulcasting
> on 902 mhz ?).
> Good luck!
> AC0Y
>
>
>
> --- In Repeater-Builder@yahoogroups.com, "w9mwq" <[EMAIL PROTECTED]> wrote:
> > Wondering what type of radios are available for use as voters for
> a
> > repeater. I am told that it is best if all the receivers are the
> > same for the voters, my plans are to use all micors of the same
> > chassis. Is this true as well for the transmitters? What my
> plans
> > are is to use the Doug Hall Voter system, running three voters
> from
> > 146.325 receive to a transmit frequency on 902 Mhz, if this is
> > possible. What brick walls am I heading into. Thanks.
> >
> > Mathew
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
