What about a singal generator, think that would send them? Mathew
> On all the units that I have, they either respond to the 1050 Hz tone, > or SAME, but not both. The SAME units ONLY respond to SAME codes. The > tone units only respond to tone. > > This won't help you, but there is a code to program the SAME receivers > with so they will respond to ANY alert, but they still use the SAME data > - they just ignore the FIPS (area) code. > > To guess your next question, I am not aware > of any SMs that generate SAME coding. > > Joe M. > > Mathew Quaife wrote: > > > > Thanks Mike, if the same codes were not put into the weather radio, it > > should not require the same codes to be sent is what I am thinking. I sent > > a 1050 Hz tone from the service monitor, that did not open the receiver. > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/