Bill, Cheap is not always best. The easy solution is a Communications Specialists ID-8, which costs about $70. Go here:
http://www.com-spec.com/id8.htm Since most mobile radios have DC power at the mike connector, you can simply crimp the ID-8 flying leads into the appropriate modular plug. You may need to install a jumper inside the radio to bring the activity signal to the ID-er, so that it won't perpetually key itself. Some of the very inexpensive ID-ers have little or no RF immunity, and don't operate properly when close to the transmitter. The ID-8 is a versatile and reliable device. I have several in service. 73, Eric Lemmon WB6FLY -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of wa9ba Sent: Sunday, March 19, 2006 4:10 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Quick CW ID'er Has anyone came up with a cheap easy CW ID'er for a GR 500 repeater? I was hoping I could find something that would, say, plug into the mic socket that would ID every 10 minutes. Bill WA9BA Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
