Thanks Chuck, that is what they sent me, so your math is just fine. Then there
must be something I am missing. I can take one of the old xtals and they work
out just fine, so I know the receivers are working. Might I ask what the
formula you used was? It's been a long time since I have calculated a crystal
freq. so just need the formula configuration.
Mathew
Chuck Kelsey <[EMAIL PROTECTED]> wrote:
If my hasty math is correct:
144.81 low side = 14.845555
144.81 high side = 17.334444
434.875 low side = 16.39537
434.875 high side = 16.521296
Chuck
WB2EDV
----- Original Message -----
From: "n9lv" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Monday, January 01, 2007 10:40 AM
Subject: [Repeater-Builder] Bowmar Crystals Ordered, all the RX not working
for GE EXEC II mobiles
> Hope someone can help shed some light here. I ordered xtals from
> Bomar (3 week wait) for the GE EXEC II mobile radios, 6 for RX for
> 144.810 and one RX of 434.875, all high side injection. None of them
> are working at all. At the same time I ordered tx xtals for the same
> radio, they all work just fine. What might I be missing here, or did
> they just cut them all wrong.
>
> Mathew
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
