Hi Jeff! Thanks for the reply.
The no load voltage is about 14.1 volts. Bill... -----Original message----- From: "Jeff DePolo" [EMAIL PROTECTED] Date: Mon, 05 Feb 2007 16:28:07 -0800 To: [email protected] Subject: [Spam] RE: [Repeater-Builder] Mastr II Station Power Supply Problem? > > I'm setting up a Mastr II VHF station for a 2 meter repeater > > and when I > > got to the power amp to check everything I can only get about > > 86 watts > > out of the 110watt PA. I noticed that the power supply > > starts to fold > > over at about 20 watts out and when I get to 80 watts the supply is > > only at around 8 to 9 volts. > > If this station is using the stock Mastr II supply, my first bet is that the > capacitor in the ferro circuit (7.5 uF IIRC) is bad. > > What's the voltage without load? > > --- Jeff > > > >
