On a related issue, do any of you have a couple of 100 Hz. Vibrasponders I could acquire for a 2m MSR2000 project?
At 02:36 AM 3/29/2007, you wrote: >PL incode will be all the time , the PL disable is the PL DECODE what the >repeater hears, > >and what you want to turn off and on .. I have full time incode on my >repeater so I don't have to hear the intermod while I drive past a page'n >tower > >Good luck ! > >Rick > >On 28 Mar 2007 at 21:12, Doug wrote: > > > I have just about completed setting up the MSR2000 as per the > > article by K4HAL and WA6ILQ > > and it appears to work just great. I have to interface it to the 7k > > and Doug Hall interface and > > it will be ready to go. All the cabling is done. The only option > > cards left in are the TOT and > > the Station Control card. > > > > However, when I key the radio, it appears the pl tone is being > > transmitted all the time. The > > PL DISABLE switch has no affect on it. Is this normal?? It seems > > unusual to me, but I don't > > think it will hurt the operation. I can kill it if I ground pin 14 of > > the pl board which is > > a dual tone board. However, I want to be able to control the pl > > operation via the 7K. There > > are times when it would be useful. Does anyone have any ideas on > this tone?? > > > > Thanks > > > > 73 > > Doug VE5DA > > > > > >Of all the intelligent animals, Human is the species that is least >likely to learn >from its experience. >That explains why so manny of us have more then one Border Collie ! > >== www.karolinabc.ca == > >Rick,Charlote & Kids >Our Border Collies >Miss Daisy Duke >Sir Red-A-Lot >Miss Elly May >Mr Boots >Mr. Balue >Our Border Collie Message Group >[EMAIL PROTECTED] > > > > > > > > >Yahoo! Groups Links > > > Thanks, Robin Midgett K4IDC 615-322-5836 office - rolls to pager 615-835-7699 pager 615-301-1642 home [EMAIL PROTECTED] http://www.people.vanderbilt.edu/~robin.midgett/index.htm
