Hi Mike, Are you trying to take the data stream from the Ultimeter and send it to both the WX Trak for APRS and the CAT WS-1000, which would be connected to your CAT-1000?
-Sean > Gary, > > I'm not trying to DECODE any packet data. just convert the Peet WX data to > packets for the radio to transmit. However, that is NOT what I'm asking, > as > the APRS portion of the project is out of my hands. > > > > My question is only about the interface between the Ultimeter and the > CAT-1000. > > > > Mike > > WM4B > > > > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of Gary > Sent: Saturday, January 12, 2008 3:27 PM > To: [email protected] > Subject: Re: [Repeater-Builder] APRS linking to CAT Controller > > > > Mike, > it may be best to work with Byon directly on this. As I mentioned before > the > TT3 can't do this but the TT4 might, Byon would know. > Gary > > "Mike Besemer (WM4B)" wrote: > > Gary, > > The TT will only be used as a TNC (or so el Club Presidente tells me) to > convert the serial data from the Ultimeter to Packet data. My only > concern > is the interface between the Ultimeter and the CAT-1000, as I've divorced > myself from the APRS station. > > BTW, I emailed Byon a couple of days ago and he said he expects production > release of the TT4 at the end of January. I was just about to order a TT3 > and GPS for myself, but I'm going to wait for the TT4 because (as you > mentioned) it has increased capabilities. > > 73, > > Mike > > WM4B > > > >
