Yes Sean. that's exactly it!
Mike WM4B From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, January 12, 2008 4:28 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] APRS linking to CAT Controller Hi Mike, Are you trying to take the data stream from the Ultimeter and send it to both the WX Trak for APRS and the CAT WS-1000, which would be connected to your CAT-1000? -Sean > Gary, > > I'm not trying to DECODE any packet data. just convert the Peet WX data to > packets for the radio to transmit. However, that is NOT what I'm asking, > as > the APRS portion of the project is out of my hands. > > > > My question is only about the interface between the Ultimeter and the > CAT-1000. > > > > Mike > > WM4B > > > > From: Repeater-Builder@yahoogroups.com <mailto:Repeater-Builder%40yahoogroups.com> > [mailto:Repeater-Builder@yahoogroups.com <mailto:Repeater-Builder%40yahoogroups.com> ] On Behalf Of Gary > Sent: Saturday, January 12, 2008 3:27 PM > To: Repeater-Builder@yahoogroups.com <mailto:Repeater-Builder%40yahoogroups.com> > Subject: Re: [Repeater-Builder] APRS linking to CAT Controller > > > > Mike, > it may be best to work with Byon directly on this. As I mentioned before > the > TT3 can't do this but the TT4 might, Byon would know. > Gary > > "Mike Besemer (WM4B)" wrote: > > Gary, > > The TT will only be used as a TNC (or so el Club Presidente tells me) to > convert the serial data from the Ultimeter to Packet data. My only > concern > is the interface between the Ultimeter and the CAT-1000, as I've divorced > myself from the APRS station. > > BTW, I emailed Byon a couple of days ago and he said he expects production > release of the TT4 at the end of January. I was just about to order a TT3 > and GPS for myself, but I'm going to wait for the TT4 because (as you > mentioned) it has increased capabilities. > > 73, > > Mike > > WM4B > > > >
<<image001.jpg>>
<<image002.jpg>>
