Joe, I *think* this system works like other "trunking" schemes, where each radio has an ID number associated to it, which it broadcasts with each PTT. THIS is what has to be authorized for repeater access, not the talkgroup. But I may be wrong - I'm not that familiar with MotoTRBO. (We do have a MotoTRBO system where I work - I can check further if necessary.)
Mark - N9WYS -----Original Message----- From: Repeater-Builder@yahoogroups.com On Behalf Of MCH Sent: Thursday, March 11, 2010 9:42 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: HAM Mototrbo Systems Just the frequency, and not which TGs it passes? Do all TRBO repeaters pass all TRBO format transmissions? Even those of people who are not authorized to use the repeater? Joe M. Brian Raker wrote: > You do have to program it to use a set frequency pair, just like any > other repeater. > > -BR > > On Thu, Mar 11, 2010 at 5:53 PM, MCH <m...@nb.net> wrote: >> So if there are two TRBO repeaters in the same area, there is no way to >> keep them both from being active and interfering with each other? That >> doesn't sound right. >> >> Or, if I have a repeater, anyone can just buy TRBO radios and use it? >> >> Joe M. >> >> Nate Duehr wrote: >>> >>> On 3/11/2010 1:54 PM, MCH wrote: >>>> >>>> I was talking about how many can be programmed in the repeater, not >>>> necessarily active at the same time per se. IOW, how many "talkgroups" >>>> can you program into the repeater. I'm assuming that you can 'deprogram' >>>> some if you have two systems in the same area. >>>> >>>> I think WD8CHL answered the question I had - any or all can be made >>>> active (except for a few reserved for special use). >>>> >>>> Joe M. >>>> >>> AFAIK the repeater doesn't get programmed with them at all. It just >>> passes them. They're just "addresses". The radios handle whether or >>> not they're "listening" for a particular talk group. >>> >>> Nate