WACOM was bought out my Telewave and there tech support staff is very helpful…
http://telewave.com/ You can cross reference your older Wacom cavities with their new product line at these links: http://www.telewave.com/pricelist/wacom.html http://www.telewave.com/pricelist/duplexers.html From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of larryjspamme...@teleport.com Sent: Thursday, September 09, 2010 11:04 AM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Wacom WP-639 Duplexer question WACOM hasn't been in business for some years now. Good luck contacting them directly! -----Original Message----- From: Richard Kelly Sent: Sep 8, 2010 9:18 PM To: repeater-builder@yahoogroups.com <mailto:repeater-builder%40yahoogroups.com> Subject: RE: [Repeater-Builder] Wacom WP-639 Duplexer question Good evening Eric, Maybe this is why when the trasmit power is dropped to the 20-50 watt range, the receive opens way up like it should. However, according to the spec sheets regarding the Wacom SP-639 Duplexer, it is rated for 200 watts. So, again, not sure what's going on. We will be trying other things such as adding a second ground rod outside the shack instead of the single one we use now. We will also try isolating the amp some more and replacing the coax feed line with hard line. Thank you very much. We will be contacting Wacom directly tomorrow. Rich Kelly, W2RRK