On 31 Oct 2012, Tony Moore <[email protected]> wrote: > On 30 Oct 2012, george greenfield <[email protected]> > wrote: > > [snip] > > > Any guidance on how to do the 5.17>5.19 upgrade would be > > appreciated: it's a year since I did the first install from scratch, > > which was from the then-current ROOL Emulator stick, so was fairly > > straightforward (AFAICR). I presume there's more to it than simply > > replacing the 517 ROM with a 519 ROM in the Roms folder.... > > Ideally, the boot sequence should be upgraded with each change of ROM > image, but that can be rather tedious, and not always necessary - it > depends on what the new ROM image expects to find.
Out of interest, I've just upgraded my RPCEmu089/519 installation from the 16-Jul-12 ROM image, to the current one, 29-Oct-12. After replacing the ROM image, I re-booted and found that the screen configuration no longer worked (the config application could see the MDF, but would not save the settings). This persuaded me to install the boot sequence from the current HardDisc4 download, and then copy over the choices folders and several files, as needed, from the old boot. It was necessary to re- configure the internet connection. All's well that ends well, but I wouldn't like to do it every day! Tony _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
