In message <85db56e752.old_coaster@old_coaster.yahoo.co.uk>
Tony Moore <[email protected]> wrote:
> On 31 Oct 2012, Tony Moore <[email protected]> wrote:
>> On 30 Oct 2012, george greenfield <[email protected]>
>> wrote:
>>
>> [snip]
>>
>> > Any guidance on how to do the 5.17>5.19 upgrade would be
>> > appreciated
[snip]
>
> Out of interest, I've just upgraded my RPCEmu089/519 installation from
> the 16-Jul-12 ROM image, to the current one, 29-Oct-12. After replacing
> the ROM image, I re-booted and found that the screen configuration no
> longer worked (the config application could see the MDF, but would not
> save the settings). This persuaded me to install the boot sequence from
> the current HardDisc4 download, and then copy over the choices folders
> and several files, as needed, from the old boot. It was necessary to re-
> configure the internet connection. All's well that ends well, but I
> wouldn't like to do it every day!
Nor me. I favour the 'ain't bust, don't need fixing' approach to
upgrades, but in this case, of course, it (Photodesk) is bust. If I
could be sure that upgrading to 5.19 would persuade it to work, I
would do it. I understand also that 5.19 offers benefits over
preceding 5.xx versions such as networking and internet (but not HD4
support)?
George
--
george greenfield
_______________________________________________
Rpcemu mailing list
[email protected]
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
