I have the 37707-4 wheelsets that I haven't used yet. I see those axles are also rated at 1.265". I am glad you warned me. Could you just put a drop of epoxy in the axle holes? I was hoping to use them in Kemtron Arch Bar trucks. Wally Collins
-----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Lance McCold Sent: Saturday, February 24, 2007 6:00 PM To: S-Scale Group Subject: {S-Scale List} NSWL wheelsets in Ace freight trucks I am trying to use NorthWest Short Line brass wheelsets (#37757-4) in Ace unsprung Bettendorf trucks. The wheelsets are great, but.... the Ace axles are 1.310 in. long, while the NWSL axles are 1.265 in. long. The NWSL wheelsets fit, but the shorter length makes them very sloppy. The fix that occurs to me is to narrow the trucks, but it is not clear how to do this. So, would those of you who have overcome this problem tell me what you did? Thanks, Lance McCold Knoxville, Tennessee [Non-text portions of this message have been removed] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
