Ken, I added a picture of the FM DCC/Speaker install in a Album named EdSauers. The install has some loose wires since I have not finished the LED mounting brackets yet.
You can try the link below but I have not tested it to see if it works. http://groups.yahoo.com/group/S-Scale/photos/album/2038838568/pic/1349951491/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc Ed Sauers ________________________________ From: Edward Sauers <[email protected]> To: [email protected] Sent: Wed, December 22, 2010 10:21:26 PM Subject: Re: {S-Scale List} Modeling questions Jeff, This was the 1st RM speaker I have used, but I can tell you from the sounds it reproduces it won't be my last. Ed Sauers ________________________________ From: Jeff Smith <[email protected]> To: [email protected] Sent: Wed, December 22, 2010 10:18:47 PM Subject: RE: {S-Scale List} Modeling questions Ed, Thanks for the kind words on our speakers. Jeff Smith RailMaster Hobbies Lakewood, CA www.railmasterhobbies.com www.facebook.com/railmasterhobbies -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Edward Sauers Sent: Wednesday, December 22, 2010 6:57 PM To: [email protected] Subject: Re: {S-Scale List} Modeling questions Ken, I mounted a QSI revolution on top of the motor, I also made a bracket that is attached to the top of the front truck mounting tower. I then installed a RailMaster Bass reflex 8 ohm 22 X 55?X9 mm speaker on the bracket I made. I was going to drill holes in the grill area but believe me there is plenty of sound volume. The RM speaker is awesome!!!! Since I chose to mount the speaker in the front I was limited to a speaker that is slightly under 1" thus the RM bass reflex, for $12 you can't go wrong. Ed Sauers [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
