The Houston S Gaugers used 1/2 ply with saw cuts every few inches on the inside. We then, after forming to the curve just glued and screwed--that was 86' I think. Showing some wear now but don't we all!
Bob Werre > > Bill, > > May I suggest using some 1/4" plywood, wetted and curved around a > form, allowed to dry, then glued together into three layers (3/4" > thick) with something like the new Titebond glue, or Gorilla glue. I > think the Titebond would be cheaper and adequate. You'll need to make > a special form for the bending and glue-up. > > Darrell > > --- In [email protected] <mailto:S-Scale%40yahoogroups.com>, > "Bill Lane" <bill@...> wrote: > > I have yet to figure out how I am going to make > > the curved rear rail. That might have to be made from something else - > > still to be determined. > > > > > [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
