Dear Chris,
We had this very situation before the Tsunami was introduced and we were
installing the Soundtraxx DSX decoders in our F units. To program either
decoder, you would have to unplug the one you do not want to change. This is
due to the CV settings not being the same for all decoders, although many are
the same, not all are. Fortunately, bot the DSX and Lenz Gold decoders used
JST connectors for the wire harness so either could be unplugged. Although the
Lenz silver was about $5 less expensive, we felt compelled to go with the
decoder that would be easier for our customers to reprogram.
Don
>
> . I was experimenting to avoid this as it adds another level of complexity
> and if you want to program separately some way of isolating them such as a
> switch.
> Chris
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
