Well, in my new quest in building S scale, I've acquired some Shinohara
turnouts. A #6 and #8. I run DCC, and when I installed the turnouts, and
threw the point rails against the main, it all shorted out. My guess is...the
frog is live and therefore must be "cut". No way to do this from the bottom so
I guess it's get out the Dremel time and have at it. I also have a "Frog
Juicer" that can be wired to the frog to handle polarity issues...
Am I close on this? Kinda disappointed to have to do this to every turnout.
Oh well, they look good.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
