Dear John, Our 01295 coupler works just fine in the switcher, if you want to use the KD802, take the AF coupler box lid, remove the front flange and use as a spacer for a perfect height... Don
On Oct 24, 2012, at 6:43 PM, John Degnan wrote: > > Well... almost. I have found that the couplers (Kadee and Sergent both) on > my SHS SW-1 are a tad bit high when installed directly (without a spacer) to > the model in a Kadee gear box. And I also remember that one of the > intermodal cars (was it the AM spine cars? Or the SSA well car?) was too > high as well and required a good bit of work to correct. > > So, almost... but not quite. > >
