Hi:
The S and HO roadbed combo works well. Attaching it with staples is 
quick. Using screws is more easly undone. Us a 3/8 recessed head self 
tapping screw. Drill a counter sink in the cork for it so it will fit 
flush. Then use 3/8 self tapping screws to secure the roadbed to the 
cork, not to the table. This will keep it quiet. Paint the screw 
heads dark when you're all done. Although the kids won't know the 
difference. They will care about the running trains and the operating 
accessories. The homosote idea may be quicker if you just lay the 
track directly on the homosote with the 3/8" screws. This method will 
also require less screws as the track won't be sliding off the road 
bed. If it moves a little, no haarm done.

In either case, don't worry about having the track laid down "rigid". 
Let it float between the hold down screws. Put just enough screws in 
to keep it from sliding out from under the trains. Watch out for 
corners and the start/end of corners. Drop a screw in each turnout. A 
very wise man taught me that Flyer runs good when the tracks have 
some give to 'em.

Good luck,
Ted


S-Trains list sponsor: http://www.americanflyertrains.com
All the Flyer you desire...books and accessories too!

To UNSUBSCRIBE from this list send a note to [EMAIL PROTECTED] 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 


Reply via email to