Dear Dima, Thank you for your help! I tried to re-run ./configure source /Users/jianpingpan/sage/.homebrew-build-env ./config.status --recheck ./config.status make build
And then I got the same error message about r-none being a dummy package. Thanks! Thanks, Jianping On Saturday, June 3, 2023 at 5:48:49 PM UTC-4 Dima Pasechnik wrote: > after you have changed the build environment, you might need to re-run > ./configure > and only then "make build" - the latter does not re-run ./configure in > such cases. > > HTH > Dima > > On Sat, Jun 3, 2023 at 9:53 PM Jianping Pan <usapan...@gmail.com> wrote: > > > > Dear Matthias, > > > > Thank you very much for your help and quick reply! I followed > instruction, actually I had to use sudo to delete jedi-0.18.1. When I run > "make build", I ran into another problem below. I attempted "brew install > r" then "make build" again, still, the same error message occur. Thanks! > > > > [r-none] Error: r is a dummy package and > > [r-none] cannot be installed using the Sage distribution. > > make[4]: *** [r-SAGE_LOCAL-no-deps] Error 1 > > make[3]: *** > [/Users/jianpingpan/sage/local/var/lib/sage/installed/r-none] Error 2 > > make[2]: *** [all-build] Error 2 > > > > real 0m0.532s > > user 0m0.344s > > sys 0m0.161s > > *************************************************************** > > Error building Sage. > > > > The following package(s) may have failed to build (not necessarily > > during this run of 'make all-build'): > > > > * package: r-none > > last build time: Jun 3 16:47 > > log file: /Users/jianpingpan/sage/logs/pkgs/r-none.log > > > > Thanks, > > Jianping > > > > On Saturday, June 3, 2023 at 2:11:38 PM UTC-4 Matthias Koeppe wrote: > >> > >> Try removing the directory > /Users/jianpingpan/sage/local/var/tmp/sage/build/jedi-0.18.1 manually > >> using "rm -r > /Users/jianpingpan/sage/local/var/tmp/sage/build/jedi-0.18.1". > >> If this fails, check if there are any files that have unusual ownership > or permissions > >> > >> > >> On Saturday, June 3, 2023 at 10:20:11 AM UTC-7 Jianping Pan wrote: > >>> > >>> Dear Sage developers, > >>> > >>> I was trying to install sage 10.1.beta1 on my macOS 12.6.5 via Git. I > followed the instruction on git and ran > >>> "make configure", > >>> set "./configure --enable-download-from-upstream-url", > >>> ran "./configure", then brew installed all the packages that it asked > me to install. > >>> Then I run "make" > >>> > >>> Below is the error report and the two log files. Thanks! > >>> > >>> [jedi-0.18.1] ERROR: Failed cleaning build dir for jedi > >>> [jedi-0.18.1] Failed to build jedi > >>> [jedi-0.18.1] ERROR: Failed to build one or more wheels > >>> [jedi-0.18.1] > ******************************************************************************** > >>> [jedi-0.18.1] Error building a wheel for jedi-0.18.1 > >>> [jedi-0.18.1] > ******************************************************************************** > >>> [jedi-0.18.1] > >>> [jedi-0.18.1] real 0m16.162s > >>> [jedi-0.18.1] user 0m14.644s > >>> [jedi-0.18.1] sys 0m5.335s > >>> [jedi-0.18.1] > ************************************************************************ > >>> [jedi-0.18.1] Error installing package jedi-0.18.1 > >>> [jedi-0.18.1] > ************************************************************************ > >>> [jedi-0.18.1] Please email sage-devel ( > http://groups.google.com/group/sage-devel) > >>> [jedi-0.18.1] explaining the problem and including the log files > >>> [jedi-0.18.1] /Users/jianpingpan/sage/logs/pkgs/jedi-0.18.1.log > >>> [jedi-0.18.1] and > >>> [jedi-0.18.1] /Users/jianpingpan/sage/config.log > >>> [jedi-0.18.1] Describe your computer, operating system, etc. > >>> [jedi-0.18.1] If you want to try to fix the problem yourself, *don't* > just cd to > >>> [jedi-0.18.1] > /Users/jianpingpan/sage/local/var/tmp/sage/build/jedi-0.18.1 and type > 'make' or whatever is appropriate. > >>> [jedi-0.18.1] Instead, the following commands setup all environment > variables > >>> [jedi-0.18.1] correctly and load a subshell for you to debug the error: > >>> [jedi-0.18.1] (cd > '/Users/jianpingpan/sage/local/var/tmp/sage/build/jedi-0.18.1' && > '/Users/jianpingpan/sage/sage' --buildsh) > >>> [jedi-0.18.1] When you are done debugging, you can type "exit" to > leave the subshell. > >>> [jedi-0.18.1] > ************************************************************************ > >>> make[4]: *** [jedi-SAGE_VENV-no-deps] Error 1 > >>> > >>> Thanks, > >>> Jianping > > > > -- > > You received this message because you are subscribed to the Google > Groups "sage-devel" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-devel+...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-devel/cfbaf68f-15fe-4264-a564-1a089fce489dn%40googlegroups.com > . > -- You received this message because you are subscribed to the Google Groups "sage-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to sage-devel+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/sage-devel/f00f6a68-b84b-410f-a27f-20be37424bfen%40googlegroups.com.
