Thank you Dima for pointing out the the right order to me. I tried that. Unfortunately the same error about dummy package r-none showed up again.
Thanks, Jianping On Saturday, June 3, 2023 at 6:16:56 PM UTC-4 Dima Pasechnik wrote: > one thing is certain: > > source /Users/jianpingpan/sage/.homebrew-build-env > > should be invoked before ./configure, not after > > > On Sat, Jun 3, 2023 at 11:14 PM Jianping Pan <usapan...@gmail.com> wrote: > > > > Dear Dima, > > > > Thank you for your help! I tried to re-run > > ./configure > > source /Users/jianpingpan/sage/.homebrew-build-env > > ./config.status --recheck > > ./config.status > > make build > > > > And then I got the same error message about r-none being a dummy > package. Thanks! > > > > Thanks, > > Jianping > > > > On Saturday, June 3, 2023 at 5:48:49 PM UTC-4 Dima Pasechnik wrote: > >> > >> after you have changed the build environment, you might need to re-run > >> ./configure > >> and only then "make build" - the latter does not re-run ./configure in > >> such cases. > >> > >> HTH > >> Dima > >> > >> On Sat, Jun 3, 2023 at 9:53 PM Jianping Pan <usapan...@gmail.com> > wrote: > >> > > >> > Dear Matthias, > >> > > >> > Thank you very much for your help and quick reply! I followed > instruction, actually I had to use sudo to delete jedi-0.18.1. When I run > "make build", I ran into another problem below. I attempted "brew install > r" then "make build" again, still, the same error message occur. Thanks! > >> > > >> > [r-none] Error: r is a dummy package and > >> > [r-none] cannot be installed using the Sage distribution. > >> > make[4]: *** [r-SAGE_LOCAL-no-deps] Error 1 > >> > make[3]: *** > [/Users/jianpingpan/sage/local/var/lib/sage/installed/r-none] Error 2 > >> > make[2]: *** [all-build] Error 2 > >> > > >> > real 0m0.532s > >> > user 0m0.344s > >> > sys 0m0.161s > >> > *************************************************************** > >> > Error building Sage. > >> > > >> > The following package(s) may have failed to build (not necessarily > >> > during this run of 'make all-build'): > >> > > >> > * package: r-none > >> > last build time: Jun 3 16:47 > >> > log file: /Users/jianpingpan/sage/logs/pkgs/r-none.log > >> > > >> > Thanks, > >> > Jianping > >> > > >> > On Saturday, June 3, 2023 at 2:11:38 PM UTC-4 Matthias Koeppe wrote: > >> >> > >> >> Try removing the directory > /Users/jianpingpan/sage/local/var/tmp/sage/build/jedi-0.18.1 manually > >> >> using "rm -r > /Users/jianpingpan/sage/local/var/tmp/sage/build/jedi-0.18.1". > >> >> If this fails, check if there are any files that have unusual > ownership or permissions > >> >> > >> >> > >> >> On Saturday, June 3, 2023 at 10:20:11 AM UTC-7 Jianping Pan wrote: > >> >>> > >> >>> Dear Sage developers, > >> >>> > >> >>> I was trying to install sage 10.1.beta1 on my macOS 12.6.5 via Git. > I followed the instruction on git and ran > >> >>> "make configure", > >> >>> set "./configure --enable-download-from-upstream-url", > >> >>> ran "./configure", then brew installed all the packages that it > asked me to install. > >> >>> Then I run "make" > >> >>> > >> >>> Below is the error report and the two log files. Thanks! > >> >>> > >> >>> [jedi-0.18.1] ERROR: Failed cleaning build dir for jedi > >> >>> [jedi-0.18.1] Failed to build jedi > >> >>> [jedi-0.18.1] ERROR: Failed to build one or more wheels > >> >>> [jedi-0.18.1] > ******************************************************************************** > >> >>> [jedi-0.18.1] Error building a wheel for jedi-0.18.1 > >> >>> [jedi-0.18.1] > ******************************************************************************** > >> >>> [jedi-0.18.1] > >> >>> [jedi-0.18.1] real 0m16.162s > >> >>> [jedi-0.18.1] user 0m14.644s > >> >>> [jedi-0.18.1] sys 0m5.335s > >> >>> [jedi-0.18.1] > ************************************************************************ > >> >>> [jedi-0.18.1] Error installing package jedi-0.18.1 > >> >>> [jedi-0.18.1] > ************************************************************************ > >> >>> [jedi-0.18.1] Please email sage-devel ( > http://groups.google.com/group/sage-devel) > >> >>> [jedi-0.18.1] explaining the problem and including the log files > >> >>> [jedi-0.18.1] /Users/jianpingpan/sage/logs/pkgs/jedi-0.18.1.log > >> >>> [jedi-0.18.1] and > >> >>> [jedi-0.18.1] /Users/jianpingpan/sage/config.log > >> >>> [jedi-0.18.1] Describe your computer, operating system, etc. > >> >>> [jedi-0.18.1] If you want to try to fix the problem yourself, > *don't* just cd to > >> >>> [jedi-0.18.1] > /Users/jianpingpan/sage/local/var/tmp/sage/build/jedi-0.18.1 and type > 'make' or whatever is appropriate. > >> >>> [jedi-0.18.1] Instead, the following commands setup all environment > variables > >> >>> [jedi-0.18.1] correctly and load a subshell for you to debug the > error: > >> >>> [jedi-0.18.1] (cd > '/Users/jianpingpan/sage/local/var/tmp/sage/build/jedi-0.18.1' && > '/Users/jianpingpan/sage/sage' --buildsh) > >> >>> [jedi-0.18.1] When you are done debugging, you can type "exit" to > leave the subshell. > >> >>> [jedi-0.18.1] > ************************************************************************ > >> >>> make[4]: *** [jedi-SAGE_VENV-no-deps] Error 1 > >> >>> > >> >>> Thanks, > >> >>> Jianping > >> > > >> > -- > >> > You received this message because you are subscribed to the Google > Groups "sage-devel" group. > >> > To unsubscribe from this group and stop receiving emails from it, > send an email to sage-devel+...@googlegroups.com. > >> > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-devel/cfbaf68f-15fe-4264-a564-1a089fce489dn%40googlegroups.com > . > > > > -- > > You received this message because you are subscribed to the Google > Groups "sage-devel" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to sage-devel+...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-devel/f00f6a68-b84b-410f-a27f-20be37424bfen%40googlegroups.com > . > -- You received this message because you are subscribed to the Google Groups "sage-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to sage-devel+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/sage-devel/ed689430-a8fc-4587-9ccc-d53a751c10aen%40googlegroups.com.
