Hi Karl,
I'm the original author of that driver and the TCL stuff.
If you don't get it to work let me know and I'll try to figure out why.
Sounds that the next step on the list is to create the appropriate device
node in /dev (major 123 minor 0), though..
Cheers,
Wolf.
"Sigler, Karl" wrote:
> Sorry for the dual post. I got an undeliverable before it posted so I
> resent.
>
> Still I won't waste bandwidth with an apology so here's how I got cardmgr to
> see the pcmcia reader:
>
> In /etc/pcmcia/config I added the following lines:
>
> in the device section:
>
> device "gpr400_cs"
> class "serial" module "gpr400_cs"
>
> Then down with the other serial devices I added:
>
> card "GEMPLUS"
> version "GEMPLUS", "GPR400", "V1.1", ""
> bind "gpr400_cs"
>
> And now cardmgr happily beeps on card insertion and insmods just fine on its
> own. Of course I can't get TCL to see it yet, but that's another story. I'll
> let you know when I get that fixed too :)
>
> Karl
>
> ***************************************************************
> Linux Smart Card Developers - M.U.S.C.L.E.
> (Movement for the Use of Smart Cards in a Linux Environment)
> http://www.linuxnet.com/smartcard/index.html
> ***************************************************************
***************************************************************
Linux Smart Card Developers - M.U.S.C.L.E.
(Movement for the Use of Smart Cards in a Linux Environment)
http://www.linuxnet.com/smartcard/index.html
***************************************************************
