Grab your Phillips, it's...
The Latest from The Screwdriver List!
Well lets see if I can Help you all out. First you need to check out the
settings on the mother board, it is my experence that some of the mother
boards dont work with the automatic settings , that can be used with the
mother board. So you need to set it up manually. If that doesnt work it
could be the power supply I also have seen them go bad from the start. Try
that out and if that doesn't work email me and I will try to help you out
some more...
----- Original Message -----
From: Glen and Mary Lawson <[EMAIL PROTECTED]>
To: Multiple recipients of The_Screwdriver_List <[EMAIL PROTECTED]>
Sent: Sunday, February 18, 2001 6:26 PM
Subject: From The Screwdriver List: help! no beep, no fan, nothing
> Grab your Phillips, it's...
> The Latest from The Screwdriver List!
>
>
> I need a little help. I'm building my first ATX system. When I power
> on, nothing happens. No fan, No beeps, nothing. The power supply fan
> doesn't come on. Nothing happens. Could I have a bad power supply?
>
> Here are the specs:
> Asus A7Pro with Thunderbird 750
> Easo Mid-Tower 300 W
> Riva TNT2 Video w/ 32MB
> 128 MB PC 133 SDRAM
>
> Anything else seems irrelevant because absolutely nothing happens. The
> monitor seems to believe it is plugged in to something because the
> screen is blank (not the "No Input" message you get when it is
> unplugged)
>
> I thought I was somewhat capable with the old systems I have messed with
> and the 2 Socket 7 systems I have built. Now I am stumped.
>
> Anyone with any help will have my undying gratitude.
>
> --
> Glen Lawson
> Gainesville, GA
> [EMAIL PROTECTED]
> http://glawson.home.mindspring.com
>
> ++++++++++++++++++++++++++++++++++++++++++++
> That's all for now from The Screwdriver List
> "Red Stripe to Pin 1"
> ++++++++++++++++++++++++++++++++++++++++++++
>
>
>
>
++++++++++++++++++++++++++++++++++++++++++++
That's all for now from The Screwdriver List
"Red Stripe to Pin 1"
++++++++++++++++++++++++++++++++++++++++++++
