Grab your Phillips, it's...
The Latest from The Screwdriver List!
How about the little red switch external to the back of the case right where
you plug in the black power cord. Switch must be at 115, not 220. Once, and
I don't know why, I fired up a built computer and nothing, and when finally
looked in back, it had been on 220, and nary a sound when turning on.
Switched to 115 and fired up nice.
----- Original Message -----
From: "Keith R. White" <[EMAIL PROTECTED]>
To: "Multiple recipients of The_Screwdriver_List" <[EMAIL PROTECTED]>
Sent: Monday, February 19, 2001 3:58 PM
Subject: From The Screwdriver List: Re: help! no beep, no fan, nothing
> Grab your Phillips, it's...
> The Latest from The Screwdriver List!
>
>
> It could also be either the on-off switch or the wiring to the switch.
> If the switch is good and wired correctly then my bet would be the power
> supply.
> Keith R. White
> Comp TIA A+ Certified
> [EMAIL PROTECTED]
> From "The White House"
> ++++++++++++++++++++++++++++++++++++++++++++
> That's all for now from The Screwdriver List
> "Red Stripe to Pin 1"
> ++++++++++++++++++++++++++++++++++++++++++++
>
>
>
++++++++++++++++++++++++++++++++++++++++++++
That's all for now from The Screwdriver List
"Red Stripe to Pin 1"
++++++++++++++++++++++++++++++++++++++++++++
