RE: [analog-help] Help needed: How can I get anglform.pl working from browser?
Remove the !-- from the start and the -- from the end of the line in which it states what cfg file to use and do not leave a space between the < and the first word and the same applies to the ending word. ie It should look like this also remove the -- from the other line like so By leaving those in the line is only a comment so you have to remove them for the lines to take effect. Hope this helps. Cheers > -Original Message- > From: Heike Hundt [SMTP:[EMAIL PROTECTED]] > Sent: Monday, 12 March 2001 22:52 > To: [EMAIL PROTECTED] > Subject: [analog-help] Help needed: How can I get anglform.pl working > from browser? > > Due to no response up to now I am asking once again: > Meanwhile I have tested also on SUN Solaris with the same effect. > Everything works fine on commandline except anlgform.pl from the > Browser. What am I doing wrong? > > Heike > > Following my first message: > After reading many many emails dealing with this subject it is my last > try to get it working. > I have installed analog 4.16 for NT into the following directory: > C:\analog\analog 4.16 > o analog itself works fine > > I configured anlgform.pl with the appropriate path to the executable: > > ... > > $analog = 'C:\analog\analog 4.16\analog.exe'; > > ... > My HTML file anglform.html looks like > > > > > > I have changed the method to get to see the whole query string. > > Everything works fine from the command line as well as other perl > scripts from the browser. > C:\ perl anlgform.pl REQINCLUDE=pages > produces the whole report. > > I registered that starting anlgform.pl from my cgi-bin directory I need > to have an analog.cfg file there. If not I am getting those Failed to > open configuration file errors. > Why? > > Trying to access anlgform.pl from my browser or even from a telnet > session gives back Document contains no data but no error_log entry > since HTTP Return Code 200 means successful but 0 bytes. > > Any idea where to look or what to test? > > Thanks in advance > > Heike > > > This is the analog-help mailing list. To unsubscribe from this > mailing list, send mail to [EMAIL PROTECTED] > with "unsubscribe" in the main BODY OF THE MESSAGE. > List archived at http://www.mail-archive.com/analog-help@lists.isite.net/ > > DISCLAIMER The information contained in the above e-mail message or messages (which includes any attachments) is confidential and may be legally privileged. It is intended only for the use of the person or entity to which it is addressed. If you are not the addressee any form of disclosure, copying, modification, distribution or any action taken or omitted in reliance on the information is unauthorised. Opinions contained in the message(s) do not necessarily reflect the opinions of the Queensland Government and its authorities. If you received this communication in error, please notify the sender immediately and delete it from your computer system network. This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Help needed: How can I get anglform.pl working from browser?
Exactly the same result with 4.90beta3. Heike Stephen Turner wrote: > Try using 4.90beta3 -- it's much easier to set up because it makes > assumptions about the correct directories for the config file etc. > > -- > Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ > Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England > "Your account can only be used for a single internet session at any one >time and for no more than 24 hours in any one day." (NTL terms of use) > > > This is the analog-help mailing list. To unsubscribe from this > mailing list, send mail to [EMAIL PROTECTED] > with "unsubscribe" in the main BODY OF THE MESSAGE. > List archived at http://www.mail-archive.com/analog-help@lists.isite.net/ > This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Search Term Reporting?
"Gary K. Foote" <[EMAIL PROTECTED]> wrote: > I just began using Analog at my IPP today. My IPP uses Analog 3.2 I have a problem. > analog3: Warning R: Turning off empty Referrer Report > (For help on all errors and warnings, see docs/errors.html) > > Where are my search engine terms input by the user? Search reports were added to Analog with version 3.90beta http://www.analog.cx/docs/whatsnew.html#new390b1 > Also, how can I find the referring URLs? It looks like your IPP isn't logging referrers Aengus This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
[analog-help] Search Term Reporting?
Hi, I just began using Analog at my IPP today. My IPP uses Analog 3.2 I have a problem. Sending the following command: analog3 +g/usr/home/wx/analog-test.cfg by telnet nets the following results: analog3 +g/usr/home/wx/analog-test.cfg analog3: Warning R: Turning off empty Referrer Report (For help on all errors and warnings, see docs/errors.html) analog3: Warning R: Turning off empty Referring Site Report analog3: Warning R: Turning off empty Redirected Referrer Report analog3: Warning R: Turning off empty Failed Referrer Report analog3: Warning R: Turning off empty Browser Report analog3: Warning R: Turning off empty Browser Summary analog3: Warning R: Turning off empty Virtual Host Report analog3: Warning R: Turning off empty User Report analog3: Warning R: Turning off empty User Failure Report analog-test.cfg reads: HOSTNAME "Weather by E-mail" HOSTURL http://www.weatherbyemail.com/ LOGFILE /usr/home/wx/www_logs/weatherbyemail* OUTFILE /usr/www/users/wx/statistics-test.html ALL on DNSFILE /usr/home/wx/.dnscache Web stats results are at: http://www88.pair.com/~wx/swiss-statistics.html Where are my search engine terms input by the user? Also, how can I find the referring URLs? Thanks, Gary K. Foote This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] problem with *ARGSINCLUDE/EXCLUDE on 4.90Beta3
I've gotten that far. Obviously I have to include the scripts in the report before I can set floors on their arguments. But, I'm still having problems with REFARGSINCLUDE, REFARGSEXCLUDE, and REFARGSFLOOR. I have the script I want to report on included, the one I don't is excluded, and the floor is set. Yet it still ignores the exclude and the floor, reporting every set of arguments to every script in the referrer report that has 10 requests or more. >From my config file: REFARGSEXCLUDE /dir.pl REFARGSINCLUDE /clickthrough.php3 REFARGSFLOOR 50r This ought to exlude /dir.pl form arguments reporting in the referrer report. The /clickthrough.php3 script should be included for arguments reporting in referrer report. And the floor for the arguments reporting should be set to 50 requests minimum. But this is what these setting produce in the final report: (I changed the actual arguments for security reasons) reqs: file --: 114904: /clickthrough.php3 27236: /clickthrough.php3?url=one set of arguments 7323: /clickthrough.php3?url=another set of arguments 6473: /clickthrough.php3?url=even more different arguments . . . . 22: /clickthrough.php3?url=obscure set of arguments 17: /clickthrough.php3?url=even more obscure set of arguments 12: /clickthrough.php3?url=really obscure set of arguments 45390: /dir.pl 18: /dir.pl?field_name=dir 1 12: /dir.pl?field_name=dir 2 12: /dir.pl?field_name=dir 3 According to the config parameters any set of arguments with less than 50 requests to /clickthrough.pl should not be reported, yet it is. And no arguments for /dir.pl should be reported at all, yet they are. All of the referrer report is using an REFARGSFLOOR of 10r apparently from looking through the report even though I specifically set the floor to 50r. Can somebody please help me out here? I've been fiddling with this thing for days now and still can't get it to work right. It's driving me crazy. On Mon, 12 Mar 2001, Stephen Turner wrote: > I'm not exactly sure what you've done wrong, but it certainly looks as if > you haven't understood the interaction between *ARGSINCLUDE and *ARGSFLOOR. > > *ARGSINCLUDE says whether the arguments should be read from the logfile at > all for given filenames or referrers. It affects all the reports. The > *ARGSFLOOR commands, on the other hand, say how many arguments to include in > each report. > > -- > Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ > Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England > "Your account can only be used for a single internet session at any one >time and for no more than 24 hours in any one day." (NTL terms of use) > > > This is the analog-help mailing list. To unsubscribe from this > mailing list, send mail to [EMAIL PROTECTED] > with "unsubscribe" in the main BODY OF THE MESSAGE. > List archived at http://www.mail-archive.com/analog-help@lists.isite.net/ > > -- David Keppler [EMAIL PROTECTED] Testing can show the presense of bugs, but not their absence. -- Dijkstra This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] problem with *ARGSINCLUDE/EXCLUDE on 4.90Beta3
I'm not exactly sure what you've done wrong, but it certainly looks as if you haven't understood the interaction between *ARGSINCLUDE and *ARGSFLOOR. *ARGSINCLUDE says whether the arguments should be read from the logfile at all for given filenames or referrers. It affects all the reports. The *ARGSFLOOR commands, on the other hand, say how many arguments to include in each report. -- Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England "Your account can only be used for a single internet session at any one time and for no more than 24 hours in any one day." (NTL terms of use) This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Help needed: How can I get anglform.pl working from browser?
Try using 4.90beta3 -- it's much easier to set up because it makes assumptions about the correct directories for the config file etc. -- Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England "Your account can only be used for a single internet session at any one time and for no more than 24 hours in any one day." (NTL terms of use) This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Help needed: How can I get anglform.pl working from browser?
Thanks for the tip but nothing changed and I don't believe that something in the HTML file has influence on that. Is my understanding wrong that the perl script provided with the necessary parameters should work if called directly from the browser? Since I only wanted to use the default analog.cfg configuration file I have also commented out the "cg" parameter. http://hhundt.de.com/perl/anlgform.pl?GENERAL=ON&MONTHLY=ON&WEEKLY=OFF&DAILY=ON&FULLDAILY=OFF&HOURLY=ON gives back Document contains no data. Heike :-) Aengus wrote: > From: "Heike Hundt" <[EMAIL PROTECTED]> > > ... > > My HTML file anglform.html looks like > > > > > > > > denote a HTML comment. Anything between those markers is > ignored. Change the line to: > > > Aengus > > > This is the analog-help mailing list. To unsubscribe from this > mailing list, send mail to [EMAIL PROTECTED] > with "unsubscribe" in the main BODY OF THE MESSAGE. > List archived at http://www.mail-archive.com/analog-help@lists.isite.net/ > This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Help needed: How can I get anglform.pl working from browser?
From: "Heike Hundt" <[EMAIL PROTECTED]> > ... > My HTML file anglform.html looks like > > > denote a HTML comment. Anything between those markers is ignored. Change the line to: Aengus This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] request report configuaration
Hi Stephen Thanks for that, I am currently experimenting with it to see what happens. chris Stephen Turner wrote: > On Fri, 9 Mar 2001, Aengus wrote: > > > "Jeremy Wadsack" <[EMAIL PROTECTED]> wrote: > > > > > [EMAIL PROTECTED] wrote: > > > > > > > I am having problems with the request report section of the stats > > > > software. currently it is only showing the html file that have been > > > > downloaded. I require to know named .exe files that are being > > > > downloaded as well. Can some tell me how this can be configured so that > > > > named .exe files percentages and amounts for each exe file can be > > > > seen. > > > > > > This probably means you have > > > > > > REQINCLUDE pages > > > > > > in your configuration files. You can either remove this or override it > > > with this command: > > > > > > REQINCLUDE * > > > > I think > > > > PAGEINCLUDE *.exe > > > > might be more appropriate. It will include *.exe in the request report, but > > still leave the gifs and jpgs that often swamp the request report if you do > > REQINCLUDE * > > > > Well, how about REQINCLUDE *.exe (in addition to the existing > REQINCLUDE pages). That will display *.exe in the Request Report > without counting them as 'pages' in other reports. > > -- > Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ > Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England > "Your account can only be used for a single internet session at any one >time and for no more than 24 hours in any one day." (NTL terms of use) > > > This is the analog-help mailing list. To unsubscribe from this > mailing list, send mail to [EMAIL PROTECTED] > with "unsubscribe" in the main BODY OF THE MESSAGE. > List archived at http://www.mail-archive.com/analog-help@lists.isite.net/ > -- Regards Chris Customer Support Manager NewNet Ltd. e-mail: [EMAIL PROTECTED] http://www.newnet.co.uk This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
[analog-help] Help needed: How can I get anglform.pl working from browser?
Due to no response up to now I am asking once again: Meanwhile I have tested also on SUN Solaris with the same effect. Everything works fine on commandline except anlgform.pl from the Browser. What am I doing wrong? Heike Following my first message: After reading many many emails dealing with this subject it is my last try to get it working. I have installed analog 4.16 for NT into the following directory: C:\analog\analog 4.16 o analog itself works fine I configured anlgform.pl with the appropriate path to the executable: ... $analog = 'C:\analog\analog 4.16\analog.exe'; ... My HTML file anglform.html looks like I have changed the method to get to see the whole query string. Everything works fine from the command line as well as other perl scripts from the browser. C:\ perl anlgform.pl REQINCLUDE=pages produces the whole report. I registered that starting anlgform.pl from my cgi-bin directory I need to have an analog.cfg file there. If not I am getting those Failed to open configuration file errors. Why? Trying to access anlgform.pl from my browser or even from a telnet session gives back Document contains no data but no error_log entry since HTTP Return Code 200 means successful but 0 bytes. Any idea where to look or what to test? Thanks in advance Heike This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] Missing Distinct Hosts
On Sat, 10 Mar 2001, Roland Leong wrote: > FreeBSD Unix > Analog 4.1 > > In the general summary, the Distinct Hosts Served line is missing. Is > there something I have to enable to get this line? In 4.1, you get it when you already have the Host Report, Domain Report or Organisation Report enabled. In the new beta versions, you get it even without those reports. -- Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England "Your account can only be used for a single internet session at any one time and for no more than 24 hours in any one day." (NTL terms of use) This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/
Re: [analog-help] request report configuaration
On Fri, 9 Mar 2001, Aengus wrote: > "Jeremy Wadsack" <[EMAIL PROTECTED]> wrote: > > > [EMAIL PROTECTED] wrote: > > > > > I am having problems with the request report section of the stats > > > software. currently it is only showing the html file that have been > > > downloaded. I require to know named .exe files that are being > > > downloaded as well. Can some tell me how this can be configured so that > > > named .exe files percentages and amounts for each exe file can be > > > seen. > > > > This probably means you have > > > > REQINCLUDE pages > > > > in your configuration files. You can either remove this or override it > > with this command: > > > > REQINCLUDE * > > I think > > PAGEINCLUDE *.exe > > might be more appropriate. It will include *.exe in the request report, but > still leave the gifs and jpgs that often swamp the request report if you do > REQINCLUDE * > Well, how about REQINCLUDE *.exe (in addition to the existing REQINCLUDE pages). That will display *.exe in the Request Report without counting them as 'pages' in other reports. -- Stephen Turner http://www.statslab.cam.ac.uk/~sret1/ Statistical Laboratory, Wilberforce Road, Cambridge, CB3 0WB, England "Your account can only be used for a single internet session at any one time and for no more than 24 hours in any one day." (NTL terms of use) This is the analog-help mailing list. To unsubscribe from this mailing list, send mail to [EMAIL PROTECTED] with "unsubscribe" in the main BODY OF THE MESSAGE. List archived at http://www.mail-archive.com/analog-help@lists.isite.net/