Re: Access Server config [7:21877]
First of all I am using it to console in to the phone switch not a modem. Second how would I set the speed to 2400. Access server has its own line speed different from baud rate. Like for expample 9600 would be equal to 38400 on access server? I found that on Cisco's web site. Thanks, Alex Andy Hoang wrote: > If it says open then it works. Can you issue some modem commands? Try > ATZ. The modem should respond with an OK. You can set the access > server run at speed 2400. Is your cable correct? The modem is DCE and your > access server async line is DTE. > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > khramov > Sent: Wednesday, October 03, 2001 2:50 PM > To: [EMAIL PROTECTED] > Subject: Re: Access Server config [7:21877] > > Nope there are no passwords, > I've got it to the point where I telnet into async 1 port and it opens it > up, but > nothing comes on the screesn, It just says open. I think there might be a > speed > mismatch issue, device that is attached to it runs at 2400 and I do no think > that you > can set access server to run at the speed lower then 9600. So if anyone has > any ideas > please help. > Here is the config: > interface Ethernet0 > ip address 192.168.190.25 255.255.255.0 > no ip route-cache > no ip mroute-cache > ! > interface Serial0 > no ip address > no ip route-cache > no ip mroute-cache > shutdown > ! > interface Serial1 > no ip address > no ip route-cache > no ip mroute-cache > shutdown > ! > interface Async1 > no ip address > async mode dedicated > no peer default ip address > ! > ip default-gateway 192.168.190.2 > no ip classless > ip route 0.0.0.0 0.0.0.0 192.168.190.2 > ip route 192.168.78.0 255.255.255.0 192.168.190.2 > ! > line con 0 > line 1 8 > no exec > modem InOut > transport preferred telnet > transport input all > stopbits 1 > speed 38400 > line 9 16 > line aux 0 > > Tarak Robbana wrote: > > > Is there a password set on the device your telneting into? Sorry, > > have to start with the small stuff. > > [GroupStudy.com removed an attachment of type text/x-vcard which had a name > of khramov.vcf] > _ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com [GroupStudy.com removed an attachment of type text/x-vcard which had a name of khramov.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22032&t=21877 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Access Server config [7:21877]
If it says open then it works. Can you issue some modem commands? Try ATZ. The modem should respond with an OK. You can set the access server run at speed 2400. Is your cable correct? The modem is DCE and your access server async line is DTE. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of khramov Sent: Wednesday, October 03, 2001 2:50 PM To: [EMAIL PROTECTED] Subject: Re: Access Server config [7:21877] Nope there are no passwords, I've got it to the point where I telnet into async 1 port and it opens it up, but nothing comes on the screesn, It just says open. I think there might be a speed mismatch issue, device that is attached to it runs at 2400 and I do no think that you can set access server to run at the speed lower then 9600. So if anyone has any ideas please help. Here is the config: interface Ethernet0 ip address 192.168.190.25 255.255.255.0 no ip route-cache no ip mroute-cache ! interface Serial0 no ip address no ip route-cache no ip mroute-cache shutdown ! interface Serial1 no ip address no ip route-cache no ip mroute-cache shutdown ! interface Async1 no ip address async mode dedicated no peer default ip address ! ip default-gateway 192.168.190.2 no ip classless ip route 0.0.0.0 0.0.0.0 192.168.190.2 ip route 192.168.78.0 255.255.255.0 192.168.190.2 ! line con 0 line 1 8 no exec modem InOut transport preferred telnet transport input all stopbits 1 speed 38400 line 9 16 line aux 0 Tarak Robbana wrote: > Is there a password set on the device your telneting into? Sorry, > have to start with the small stuff. [GroupStudy.com removed an attachment of type text/x-vcard which had a name of khramov.vcf] _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21949&t=21877 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Access Server config [7:21877]
Nope there are no passwords, I've got it to the point where I telnet into async 1 port and it opens it up, but nothing comes on the screesn, It just says open. I think there might be a speed mismatch issue, device that is attached to it runs at 2400 and I do no think that you can set access server to run at the speed lower then 9600. So if anyone has any ideas please help. Here is the config: interface Ethernet0 ip address 192.168.190.25 255.255.255.0 no ip route-cache no ip mroute-cache ! interface Serial0 no ip address no ip route-cache no ip mroute-cache shutdown ! interface Serial1 no ip address no ip route-cache no ip mroute-cache shutdown ! interface Async1 no ip address async mode dedicated no peer default ip address ! ip default-gateway 192.168.190.2 no ip classless ip route 0.0.0.0 0.0.0.0 192.168.190.2 ip route 192.168.78.0 255.255.255.0 192.168.190.2 ! line con 0 line 1 8 no exec modem InOut transport preferred telnet transport input all stopbits 1 speed 38400 line 9 16 line aux 0 Tarak Robbana wrote: > Is there a password set on the device your telneting into? Sorry, > have to start with the small stuff. [GroupStudy.com removed an attachment of type text/x-vcard which had a name of khramov.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21939&t=21877 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Access Server config [7:21877]
Is there a password set on the device your telneting into? Sorry, have to start with the small stuff. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21914&t=21877 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Access Server config [7:21877]
add no exec to line 1 8 to get to line 1, telnet 192.168.190.25 2001 if you add ip host device1 2001 192.168.198.25, then you can just telnet device1 If you get connection refused, clear line 1. you might have to do that twice to actually get the line cleared. good luck -e- - Original Message - From: "khramov" To: Sent: Wednesday, October 03, 2001 10:18 AM Subject: Re: Access Server config [7:21877] > here is the config : > ip host modem1 2001 192.168.190.25 > ip name-server 192.78.4.156 > ip name-server 192.78.4.158 > ! > interface Ethernet0 > ip address 192.168.190.25 255.255.255.0 > no ip route-cache > ! > interface Serial0 > no ip address > no ip route-cache > shutdown > ! > interface Serial1 > no ip address > no ip route-cache > shutdown > ! > interface Async1 > no ip address > async mode dedicated > no peer default ip address > ! > no ip classless > ip route 0.0.0.0 0.0.0.0 192.168.190.2 > ip route 192.168.78.0 255.255.255.0 192.168.190.2 > ! > line con 0 > line 1 8 > modem InOut > transport input all > stopbits 1 > speed 38400 > flowcontrol hardware > line 9 16 > line aux 0 > > khramov wrote: > > > We are trying to configure access server to console in to the device > > that is attached to it through async port. When we try to telnet into > > the device that attached to the router we get connection refused > > message. What should we check? > > > > [GroupStudy.com removed an attachment of type text/x-vcard which had a name > > of khramov.vcf] > > [GroupStudy.com removed an attachment of type text/x-vcard which had a name > of khramov.vcf] _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21887&t=21877 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Access Server config [7:21877]
We are trying to configure access server to console in to the device that is attached to it through async port. When we try to telnet into the device that attached to the router we get connection refused message. What should we check? [GroupStudy.com removed an attachment of type text/x-vcard which had a name of khramov.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21877&t=21877 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Access Server config [7:21877]
here is the config : ip host modem1 2001 192.168.190.25 ip name-server 192.78.4.156 ip name-server 192.78.4.158 ! interface Ethernet0 ip address 192.168.190.25 255.255.255.0 no ip route-cache ! interface Serial0 no ip address no ip route-cache shutdown ! interface Serial1 no ip address no ip route-cache shutdown ! interface Async1 no ip address async mode dedicated no peer default ip address ! no ip classless ip route 0.0.0.0 0.0.0.0 192.168.190.2 ip route 192.168.78.0 255.255.255.0 192.168.190.2 ! line con 0 line 1 8 modem InOut transport input all stopbits 1 speed 38400 flowcontrol hardware line 9 16 line aux 0 khramov wrote: > We are trying to configure access server to console in to the device > that is attached to it through async port. When we try to telnet into > the device that attached to the router we get connection refused > message. What should we check? > > [GroupStudy.com removed an attachment of type text/x-vcard which had a name > of khramov.vcf] [GroupStudy.com removed an attachment of type text/x-vcard which had a name of khramov.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21878&t=21877 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
