Re: [newbie] Grip or RipperX
On Sat, 2003-08-16 at 23:16, David E. Fox wrote: Bladeenc being used and I am seeing some progress but very slow. Shows 0.47% after about 15 minutes. and Enc: Idle Isn't bladeenc old? lame comes highly recommended in case you are not using it, it's over at any plf mirror. ;) David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- __ I'm pretty sure it's ancient. I've got some bladeenc stuff saved on some CD's from the mid to late 90's. LX -- °°° Linux Mandrake 9.1 Kernel 2.4.21-0.13mdk Filter That, Beach! --Lanman, MDK Newbie List Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
Good Morning LX! How's things? Lanman Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
On Saturday 16 August 2003 12:58 am, Dennis Myers wrote: Yes, and it shows nothing for error messages. Just putts along. I wonder if it is not my CDROM. It is an older 24X and maybe has a problem with DMA or something. What does hdparm show about it? Have you tried it with both DMA enabled and disabled? BTW, is it SCSI or IDE? Other possibilites - bad cable? If its IDE are your HD and CD on the same channel? (master/slave). Might want to change that if it is... Just some random thoughts. -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
On Friday 15 August 2003 05:13 pm, Aron Smith wrote: On Fri, 2003-08-15 at 21:56, Dennis Myers wrote: On Friday 15 August 2003 11:41 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Friday 15 August 2003 11:21 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Friday 15 August 2003 10:21 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Tuesday 12 August 2003 04:33 pm, Dennis Myers wrote: I have both installed but when I try to rip a audio CD I end up with either empty files or in grip it gives me the :-l face and quits. My cds play ok but it acts like it cannot read them. I have notlame installed. Not sure what to ask or what I may be doing wrong. Any suggestions. I guess I will ask again, I have read the manuals on lame ripperX, gprip, and still get nothing but empty mp3 files. I am missing something. No progress shows on the bars or no % progress, after an hour not one track ripped. This is not what I expected, any ideas? I have reinstalled after uninstalling. Same thing. TIA In grip, go to Config=Rip=Options and see if Delay before ripping is checked. I have to have this on or my DVDROM won't rip correctly. I believe that this setting spins the drive up before it starts trying to rip anything. Also, on the same page, what is the Rip 'nice' value? Ok, checked Delay and nice is at 0.the_king_has_lost_his_crown.wav Any difference? Bladeenc being used and I am seeing some progress but very slow. Shows 0.47% after about 15 minutes. and Enc: Idle What ripper are you using? Config=Rip=Ripper and it is now at 1.06% bleah! Kaudiocreator seems to work best for me at least for MP3s the encoder is lame Same thing happens in Kaudiocreator. I am going to change out the CDROM and see if that makes a dif. -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
On Friday 15 August 2003 09:57 pm, Dennis Myers wrote: On Tuesday 12 August 2003 04:33 pm, Dennis Myers wrote: I have both installed but when I try to rip a audio CD I end up with either empty files or in grip it gives me the :-l face and quits. My cds play ok but it acts like it cannot read them. I have notlame installed. Not sure what to ask or what I may be doing wrong. Any suggestions. I guess I will ask again, I have read the manuals on lame ripperX, gprip, and still get nothing but empty mp3 files. I am missing something. No progress shows on the bars or no % progress, after an hour not one track ripped. This is not what I expected, any ideas? I have reinstalled after uninstalling. Same thing. TIA Thanks to all who helped. The process was a good learning experience. The solution was indeed to change the CDROM! I put in a newer 40X and it runs like a race car. All of the info provided by you guys helped in eliminating possibilities and I finally did the mechanical thing. Thanks Again. -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
Bladeenc being used and I am seeing some progress but very slow. Shows 0.47% after about 15 minutes. and Enc: Idle Isn't bladeenc old? lame comes highly recommended in case you are not using it, it's over at any plf mirror. ;) David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
I guess I will ask again, I have read the manuals on lame ripperX, gprip, and still get nothing but empty mp3 files. I am missing something. No progress I haven't tried grip in a long time. I typically use cdparanoia and lame. I don't do a whole lot of cd copying / ripping though. I'm kinda doing the reverse :) mp3 to cd conversions. I suppose using grip would be helpful if you are trying to rip directly from the cd, without using any intermediate space for wav storage. I will mention konqueror audiocd:/ plugin since no one seems to have mentioned it. This is one slick puppy in the newer KDEs. konqueror and then select audio cd browser with a cd inserted into the drive. Then you can look at the cd's tracks individually as if they were files, and manipulate them, copy them, or even ogg / mp3. One thing you want to do is to copy the ogg's or mp3's off somewhere else, since konqueror stores them in its own internal temp structure directories, and if you navigate away, they're gone and you have to re-encode. Dennis M. linux user #180842 David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
On Tuesday 12 August 2003 04:33 pm, Dennis Myers wrote: I have both installed but when I try to rip a audio CD I end up with either empty files or in grip it gives me the :-l face and quits. My cds play ok but it acts like it cannot read them. I have notlame installed. Not sure what to ask or what I may be doing wrong. Any suggestions. I guess I will ask again, I have read the manuals on lame ripperX, gprip, and still get nothing but empty mp3 files. I am missing something. No progress shows on the bars or no % progress, after an hour not one track ripped. This is not what I expected, any ideas? I have reinstalled after uninstalling. Same thing. TIA -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
On Friday 15 August 2003 11:41 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Friday 15 August 2003 11:21 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Friday 15 August 2003 10:21 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Tuesday 12 August 2003 04:33 pm, Dennis Myers wrote: I have both installed but when I try to rip a audio CD I end up with either empty files or in grip it gives me the :-l face and quits. My cds play ok but it acts like it cannot read them. I have notlame installed. Not sure what to ask or what I may be doing wrong. Any suggestions. I guess I will ask again, I have read the manuals on lame ripperX, gprip, and still get nothing but empty mp3 files. I am missing something. No progress shows on the bars or no % progress, after an hour not one track ripped. This is not what I expected, any ideas? I have reinstalled after uninstalling. Same thing. TIA In grip, go to Config=Rip=Options and see if Delay before ripping is checked. I have to have this on or my DVDROM won't rip correctly. I believe that this setting spins the drive up before it starts trying to rip anything. Also, on the same page, what is the Rip 'nice' value? Ok, checked Delay and nice is at 0.the_king_has_lost_his_crown.wav Any difference? Bladeenc being used and I am seeing some progress but very slow. Shows 0.47% after about 15 minutes. and Enc: Idle What ripper are you using? Config=Rip=Ripper and it is now at 1.06% bleah! -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
On Friday 15 August 2003 11:50 pm, Ronald J. Hall wrote: On Friday 15 August 2003 10:57 pm, Dennis Myers wrote: I guess I will ask again, I have read the manuals on lame ripperX, gprip, and still get nothing but empty mp3 files. I am missing something. No progress shows on the bars or no % progress, after an hour not one track ripped. This is not what I expected, any ideas? I have reinstalled after uninstalling. Same thing. TIA Dennis, that is so odd. I use Grip here, out of the box from my v9.1 install and its always worked great. Are there any error messages? Did you try starting it from a shell to see what it says? Yes, and it shows nothing for error messages. Just putts along. I wonder if it is not my CDROM. It is an older 24X and maybe has a problem with DMA or something. -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
Dennis Myers wrote: On Friday 15 August 2003 11:41 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Friday 15 August 2003 11:21 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Friday 15 August 2003 10:21 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Tuesday 12 August 2003 04:33 pm, Dennis Myers wrote: I have both installed but when I try to rip a audio CD I end up with either empty files or in grip it gives me the :-l face and quits. My cds play ok but it acts like it cannot read them. I have notlame installed. Not sure what to ask or what I may be doing wrong. Any suggestions. I guess I will ask again, I have read the manuals on lame ripperX, gprip, and still get nothing but empty mp3 files. I am missing something. No progress shows on the bars or no % progress, after an hour not one track ripped. This is not what I expected, any ideas? I have reinstalled after uninstalling. Same thing. TIA In grip, go to Config=Rip=Options and see if Delay before ripping is checked. I have to have this on or my DVDROM won't rip correctly. I believe that this setting spins the drive up before it starts trying to rip anything. Also, on the same page, what is the Rip 'nice' value? Ok, checked Delay and nice is at 0. Any difference? Bladeenc being used and I am seeing some progress but very slow. Shows 0.47% after about 15 minutes. and Enc: Idle What ripper are you using? Config=Rip=Ripper cdda2wav same happens with cdparanoia What kernel are you using? Maybe the old supermount is getting in the way. Have you tried manually mounting the drive ans then ripping? -- Brant Fitzsimmons [EMAIL PROTECTED] ___ Linux user #322847 | Linux machine #207465 | http://counter.li.org/ AMD Duron 1.3GHz | Mandrake 9.1 | Kernel 2.4.21-0.25mdkcustom KDE 3.1.3 | Mozilla 1.4 Mail Client ___ All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident. -Arthur Schopenhauer (1788-1860) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
On Fri, 2003-08-15 at 21:56, Dennis Myers wrote: On Friday 15 August 2003 11:41 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Friday 15 August 2003 11:21 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Friday 15 August 2003 10:21 pm, Brant Fitzsimmons wrote: Dennis Myers wrote: On Tuesday 12 August 2003 04:33 pm, Dennis Myers wrote: I have both installed but when I try to rip a audio CD I end up with either empty files or in grip it gives me the :-l face and quits. My cds play ok but it acts like it cannot read them. I have notlame installed. Not sure what to ask or what I may be doing wrong. Any suggestions. I guess I will ask again, I have read the manuals on lame ripperX, gprip, and still get nothing but empty mp3 files. I am missing something. No progress shows on the bars or no % progress, after an hour not one track ripped. This is not what I expected, any ideas? I have reinstalled after uninstalling. Same thing. TIA In grip, go to Config=Rip=Options and see if Delay before ripping is checked. I have to have this on or my DVDROM won't rip correctly. I believe that this setting spins the drive up before it starts trying to rip anything. Also, on the same page, what is the Rip 'nice' value? Ok, checked Delay and nice is at 0.the_king_has_lost_his_crown.wav Any difference? Bladeenc being used and I am seeing some progress but very slow. Shows 0.47% after about 15 minutes. and Enc: Idle What ripper are you using? Config=Rip=Ripper and it is now at 1.06% bleah! Kaudiocreator seems to work best for me at least for MP3s the encoder is lame Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
On Tue, 2003-08-12 at 18:02, Dennis Myers wrote: On Tuesday 12 August 2003 05:15 pm, Jason Greenwood wrote: Hi Dennis, I use RipperX exclusively on 9.1 without incident. I ams ure you have tried this but make sure notlame is set as the MP3 encoder in the config. Cheers Jason PS, also start both from the cli so you can see any returned error messages that may give us a clue. Dennis Myers wrote: I have both installed but when I try to rip a audio CD I end up with either empty files or in grip it gives me the :-l face and quits. My cds play ok but it acts like it cannot read them. I have notlame installed. Not sure what to ask or what I may be doing wrong. Any suggestions. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Actually it says lame is the encoder, but I assume that is correct. Mostly it just sits there with 15 minutes showing on the progress bar and 337min to go. This is so slow as to not be worth messing with. 5 hours for one CD? something is not working right. are you starting as root there are a couple of config files that it installs Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
Hi Dennis, I use RipperX exclusively on 9.1 without incident. I ams ure you have tried this but make sure notlame is set as the MP3 encoder in the config. Cheers Jason PS, also start both from the cli so you can see any returned error messages that may give us a clue. Dennis Myers wrote: I have both installed but when I try to rip a audio CD I end up with either empty files or in grip it gives me the :-l face and quits. My cds play ok but it acts like it cannot read them. I have notlame installed. Not sure what to ask or what I may be doing wrong. Any suggestions. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Grip or RipperX
Yes, pull up a terminal and type ripperx Cheers Jason Aron Smith wrote: On Tue, 2003-08-12 at 15:15, Jason Greenwood wrote: Hi Dennis, I use RipperX exclusively on 9.1 without incident. I ams ure you have tried this but make sure notlame is set as the MP3 encoder in the config. Cheers Jason PS, also start both from the cli so you can see any returned error messages that may give us a clue. ** Any way I can run it without being root? Dennis Myers wrote: I have both installed but when I try to rip a audio CD I end up with either empty files or in grip it gives me the :-l face and quits. My cds play ok but it acts like it cannot read them. I have notlame installed. Not sure what to ask or what I may be doing wrong. Any suggestions. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com __ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com