[qmailtoaster] Creating Global Address Book QmailToaster Mail Server
Hi List, Is there any way I could create a global address book for my qmailtoaster Mail server? If there is, pls help me how to do it. Thanks, Malvin - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Sanesecurity Warnings
On Jun 9, 2010, at 10:48 PM, Eric Shubert e...@shubes.net wrote: Scott Hughes wrote: How/where are you seeing this message? Are you seeing anything else along with it? Is it running from the cronjob, or did you run it manually? If the later, what was the command? Details, details... Eric, I found out that this message is coming from my new server that I just built. I need to find a way to mark what messages are from which server! From the log file of the new server (which is also running the latest software): Jun 09 21:39:38 INFO - Sanesecurity mirror site used: mx0.roessner-net.de 78.46.253.227 Jun 09 21:40:08 WARNING - Connection to mx0.roessner-net.de 78.46.253.227 failed - Trying next mirror site... Jun 09 21:40:10 INFO - Sanesecurity mirror site used: spamcop03.sentechsa.net 66.18.67.75 Jun 09 21:40:40 WARNING - Connection to spamcop03.sentechsa.net 66.18.67.75 failed - Trying next mirror site... Jun 09 21:40:41 INFO - Sanesecurity mirror site used: roxxor.lncsa.com 188.165.202.60 I get the same errors when I run it manually. I have pinged several sites to ensure that I am resolving correctly. I'm stumped at this point. Thanks, Scott --- --- --- --- - Looks like a network, possibly routing, problem off hand. -- -Eric 'shubes' --- --- --- --- - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com ) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! --- --- --- --- - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com I would normally agree, but in this case everything seems to be okay. I pinged a couple of the Sanesecurity servers by name and was sucessful. Yum resolves and works without complaint. Strange indeed! Scott - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Creating Global Address Book QmailToaster Mail Server
Hi List, Is there any way I could create a global address book for my qmailtoaster Mail server? If there is, pls help me how to do it. To the best of my knowledge, you can create one for Squirrelmail, but that will not propagate to the clients. There will be some work in the future to incorporate LDAP into Qmailtoaster that may open some avenues to accomplish this, so you may need to look at outside 3rd party tools/projects to achieve this for the time being. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Sanesecurity Warnings
Scott Hughes wrote: On Jun 9, 2010, at 10:48 PM, Eric Shubert e...@shubes.net wrote: Scott Hughes wrote: How/where are you seeing this message? Are you seeing anything else along with it? Is it running from the cronjob, or did you run it manually? If the later, what was the command? Details, details... Eric, I found out that this message is coming from my new server that I just built. I need to find a way to mark what messages are from which server! From the log file of the new server (which is also running the latest software): Jun 09 21:39:38 INFO - Sanesecurity mirror site used: mx0.roessner-net.de 78.46.253.227 Jun 09 21:40:08 WARNING - Connection to mx0.roessner-net.de 78.46.253.227 failed - Trying next mirror site... Jun 09 21:40:10 INFO - Sanesecurity mirror site used: spamcop03.sentechsa.net 66.18.67.75 Jun 09 21:40:40 WARNING - Connection to spamcop03.sentechsa.net 66.18.67.75 failed - Trying next mirror site... Jun 09 21:40:41 INFO - Sanesecurity mirror site used: roxxor.lncsa.com 188.165.202.60 I get the same errors when I run it manually. I have pinged several sites to ensure that I am resolving correctly. I'm stumped at this point. Thanks, Scott - Looks like a network, possibly routing, problem off hand. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com I would normally agree, but in this case everything seems to be okay. I pinged a couple of the Sanesecurity servers by name and was sucessful. Yum resolves and works without complaint. Strange indeed! Scott - Then firewall perhaps? I don't know which port(s) the updates are done on. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Creating Global Address Book QmailToaster Mail Server
Jacob Vickers wrote: Hi List, Is there any way I could create a global address book for my qmailtoaster Mail server? If there is, pls help me how to do it. To the best of my knowledge, you can create one for Squirrelmail, but that will not propagate to the clients. There will be some work in the future to incorporate LDAP into Qmailtoaster that may open some avenues to accomplish this, so you may need to look at outside 3rd party tools/projects to achieve this for the time being. Right. I hope to do this at some point in the future. If anyone's interested in this, please chime in. Perhaps we can get a small team working on it. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Sanesecurity Warnings
Scott Hughes wrote: On Jun 10, 2010, at 9:31 AM, Eric Shubert e...@shubes.net wrote: Scott Hughes wrote: On Jun 9, 2010, at 10:48 PM, Eric Shubert e...@shubes.net wrote: Scott Hughes wrote: How/where are you seeing this message? Are you seeing anything else along with it? Is it running from the cronjob, or did you run it manually? If the later, what was the command? Details, details... Eric, I found out that this message is coming from my new server that I just built. I need to find a way to mark what messages are from which server! From the log file of the new server (which is also running the latest software): Jun 09 21:39:38 INFO - Sanesecurity mirror site used: mx0.roessner-net.de 78.46.253.227 Jun 09 21:40:08 WARNING - Connection to mx0.roessner-net.de 78.46.253.227 failed - Trying next mirror site... Jun 09 21:40:10 INFO - Sanesecurity mirror site used: spamcop03.sentechsa.net 66.18.67.75 Jun 09 21:40:40 WARNING - Connection to spamcop03.sentechsa.net 66.18.67.75 failed - Trying next mirror site... Jun 09 21:40:41 INFO - Sanesecurity mirror site used: roxxor.lncsa.com 188.165.202.60 I get the same errors when I run it manually. I have pinged several sites to ensure that I am resolving correctly. I'm stumped at this point. Thanks, Scott - Looks like a network, possibly routing, problem off hand. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com I would normally agree, but in this case everything seems to be okay. I pinged a couple of the Sanesecurity servers by name and was sucessful. Yum resolves and works without complaint. Strange indeed! Scott - Then firewall perhaps? I don't know which port(s) the updates are done on. -- -Eric 'shubes' Great minds think alike! I have been checking the firewall and haven't found anything. :( Scott - You might try asking on the sanesecurity users list. On gmane.org, it's gmane.comp.security.virus.clamav.sanesecurity. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Replicated Server Question
Wouldn't sync'ing the /etc directory overwrite some important files like you hosts file and further down the subdirectory tree the IP address? Scott On Jun 9, 2010, at 10:07 PM, sysadmin sysad...@tricubemedia.com wrote: Hi Scott, I to have replication running and i sync settings and data from each. Mainly I added /etc , /var and /opt, to the list Jake repication videos, So yes If you have a good working setup , sync it to the new replication server. madmac - Original Message - From: Scott Hughes To: qmailtoaster-list@qmailtoaster.com Sent: Tuesday, June 08, 2010 5:13 PM Subject: [qmailtoaster] Replicated Server Question As some of you know I am working on bringing up a replicated server. I am curious if it would be a good idea and/or advisable to copy the spamassassin database from my older server that has been in service for a while to the new one so that the new server doesn't have to 'catch up' with the old one. Catch up meaning that new server won't have the learning curve that it normally would. Also, I would like to replicate (sync) some of the other files - like the spamassassin .cf files, the spamdyke files (/opt/spamdyke/ etc) - things like that. Suggestions? Thanks, Scott
[qmailtoaster] Re: Newmodel build issues
Postmaster wrote: On 09/06/2010 23:25, Eric Shubert wrote: Postmaster wrote: On 09/06/2010 23:11, Eric Shubert wrote: Postmaster wrote: On 09/06/2010 22:40, Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Scott Hughes wrote: I am attempting to update a new QMT server. When running the newmodel script, I am getting the following: qtp-build-rpms - rpmbuild failed for clamav-toaster-0.96.1-1.3.36 qtp-build-rpms - here are the last 10 messages from the log: + '[' 0 -ne 0 ']' + cd clamav-0.96.1 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . error: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log for more details Build failed, Exiting. --- Hit ENTER to return to menu --- All other packages appeared to build without any problems. This system has had all of it's yum updates and has been rebooted. Ideas, please? Scott You know? Not that I look a bit closer, this error is from a no-brainer sort of command (chown). I wonder if fuse-unionfs isn't having a problem with COS5.5. Strangeness. When I do the commands manually (in a chroot environment, same as qtp-build-rpms does) I get no error. However, when I run the /bin/sh -e /var/tmp/rpm-tmp.80211 command, same as rpmbuild does, it ends prematurely in the same spot (chown command) with return code 1. Very peculiar. I'm going to try with a linked sandbox, which I expect will succeed. Linked sandbox works. So the problem is with fuse-unionfs and CentOS 5.5. This is a fairly low priority, but I'll continue to test to pinpoint the problem, and persue a fix. Hey Steve, I have a COS5.4 QMT with an updated kernel that I got this failure with as well. I did # yum remove fuse dkms which removed these packages with their dependencies, then reran qtp-newmodel, which reinstalled them, and it appears that qtp-newmodel has gotten past the problem part. I'll try this a little later on my test QMT 5.5 that was failing. Thought you might want to give it a try and see what you get. Well, reinstalling fuse,dkms didn't fix the problem for me on COS 5.5. I'm pretty confident that's where the problem lies though. I wonder if rebuilding them on a COS5.5 host will make it work. Doubtful. Need to ponder this some more... I have similar issue on my VPS CentOS 5.4 64 bit: Starting to build the binary rpms ...(pizza anyone?) If you want to view compile messages, you can open another terminal and: # tail -f /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log qtp-build-rpms v0.3.5 qtp-remove-pkgs v0.3.1 Building clamav-toaster-0.96.1-1.3.36 ... qtp-build-rpms - rpmbuild failed for clamav-toaster-0.96.1-1.3.36 qtp-build-rpms - here are the last 10 messages from the log: + '[' 0 -ne 0 ']' + cd clamav-0.96.1 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . error: Bad exit status from /var/tmp/rpm-tmp.72759 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.72759 (%prep) end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log for more details Build failed, Exiting. - That's so similar, it's the same! ;) I'm guessing that you're using the unionfs for sandbox? What's your kernel version? qtp-newmodel v0.3.15 starting Wed Jun 9 22:11:28 BST 2010 qtp-whatami v0.3.6 DISTRO=CentOS OSVER=5.4 QTARCH=x86_64 QTKERN=2.6.32.12-x86_64-linode12 BUILD_DIST=cnt5064 BUILD_DIR=/usr/src/redhat This machine's OS is supported and has been tested - That's a pretty new kernel. How'd you end up with that kernel on a COS 5.4 host? Yeah, this is a VPS server (Xen virtualisation). I can chose and run pretty much any kernel in a matter of seconds. Have a look at http://www.linode.com/features.cfm - Configuration profile - Postmaster, Your VPS might come in very handy here. :) Have you changed the kernel after having run qtp-newmodel with the unionfs sandbox on a previous kernel? Do you have a way to go back to the kernel that was used when you last ran qtp-newmodel successfully? (if you remember which kernel you were running then?) If so, please do so, then run qtp-newmodel test. Do you get the failure when you use the most recent COS5.5 stock kernel? (2.6.18-194.3.1.el5) Will you try: .) using 2.6.18-194.3.1.el5 kernel .) yum remove dkms fuse .) test qtp-newmodel again ? -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com)
Re: [qmailtoaster] Re: newmodel upgrade script -- make: *** [chkuser.o] Error 1
I did not make something special... I was able to install the clamav-toaster package... but for the qmail-toaster, i got the same error: qtp-newmodel v0.3.14 starting Thu Jun 10 20:31:13 CEST 2010 qtp-whatami v0.3.5 DISTRO=CentOS OSVER=5.3 QTARCH=i686 QTKERN=2.6.18-128.7.1.el5 BUILD_DIST=cnt50 BUILD_DIR=/usr/src/redhat This machine's OS is supported and has been tested Let's get on with it! The following packages have already been selected: qmail-toaster-1.03-1.3.20.src.rpm Do you want to process this selection? Shall we continue? (yes, no|skip, batch, quit) [y] / n|s / b / q : y Getting source packages ...(this may take a while) qmail-toaster-1.03-1.3.20.src.rpm is already downloaded, bypassed qtp-install-rpmforge v0.3 - getting latest version of rpmforge-release ... qtp-install-rpmforge - installed package rpmforge-release-0.3.6-1.el5.rf is the latest - nothing done. qtp-newmodel - installing perl(Encode::Detect)) perl(Razor2::Client::Agent) .. Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.mirror.connexeon.net * updates: centos.mirror.connexeon.net * addons: centos.mirror.connexeon.net * extras: centos.mirror.connexeon.net Setting up Install Process Parsing package install arguments No package perl(Encode::Detect)) available. No package perl(Razor2::Client::Agent) available. Nothing to do qtp-newmodel - updating dependencies ... Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.mirror.connexeon.net * updates: centos.mirror.connexeon.net * addons: centos.mirror.connexeon.net * extras: centos.mirror.connexeon.net Setting up Update Process No Packages marked for Update Shall we build a new sandbox at /mnt/qtp-sandbox? [y]/n: y Removing sandbox at /mnt/qtp-sandbox ... qtp-umount-sandbox v0.3.1 qtp-umount-sandbox: sandbox not mounted Would you like a unioned sandbox (quicker, smaller) [y]/n: y Using union filesystem ... qtp-mount-sandbox v0.3.1 qtp-build-unionfs v0.3.1 qtp-build-unionfs: The aufs module is already installed. qtp-mount-sandbox: sandbox mounted successfully Starting to build the binary rpms ...(pizza anyone?) If you want to view compile messages, you can open another terminal and: # tail -f /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log qtp-build-rpms v0.3.3 qtp-remove-pkgs v0.3.1 Building qmail-toaster-1.03-1.3.20 ... qtp-build-rpms - rpmbuild failed for qmail-toaster-1.03-1.3.20 qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log Build failed, Exiting. THE LAST LINES FROM /MNT/QTP-SANDBOX/USR/SRC/QTP-UPGRADE/LOG/BUILD-RECENT.LOG ARE: error.a str.a fs.a auto_qmail.o auto_split.o cat warn-auto.sh qmail-qstat.sh | sed s}QMAIL}`head -1 conf-qmail`}g | sed s}BREAK}`head -1 conf-break`}g | sed s}SPLIT}`head -1 conf-split`}g qmail-qstat chmod 755 qmail-qstat /compile qmail-tcpto.c qmail-tcpto.c:36: warning: return type of 'main' is not 'int' qmail-tcpto.c: In function 'main': qmail-tcpto.c:46: warning: implicit declaration of function 'chdir' qmail-tcpto.c:49: warning: implicit declaration of function 'open_write' qmail-tcpto.c:51: warning: implicit declaration of function 'open_read' qmail-tcpto.c:54: warning: implicit declaration of function 'read' qmail-tcpto.c:55: warning: implicit declaration of function 'close' qmail-tcpto.c:68: warning: implicit declaration of function 'byte_copy' /load qmail-tcpto ip.o now.o open.a lock.a substdio.a error.a str.a fs.a auto_qmail.o /compile qmail-tcpok.c qmail-tcpok.c:15: warning: return type of 'main' is not 'int' qmail-tcpok.c: In function 'main': qmail-tcpok.c:19: warning: implicit declaration of function 'chdir' /load qmail-tcpok open.a lock.a strerr.a substdio.a error.a str.a auto_qmail.o /compile qmail-pop3d.c qmail-pop3d.c: In function 'pop3_quit': qmail-pop3d.c:185: warning: implicit declaration of function 'maildir_getquota' qmail-pop3d.c:202: warning: implicit declaration of function 'unlink' qmail-pop3d.c:227: warning: implicit declaration of function 'close' qmail-pop3d.c: At top level: qmail-pop3d.c:330: warning: return type of 'main' is not 'int' qmail-pop3d.c: In function 'main': qmail-pop3d.c:337: warning: implicit declaration of function 'chdir' /compile commands.c /compile maildir.c maildir.c: In function 'maildir_chdir': maildir.c:21: warning: implicit declaration of function 'chdir' maildir.c: In function 'maildir_clean': maildir.c:39: warning: suggest parentheses around assignment used as truth value maildir.c:47: warning: implicit declaration of function 'unlink' maildir.c: In function 'append': maildir.c:68: warning: suggest parentheses around assignment used as truth value maildir.c: In function 'maildir_scan': maildir.c:98: warning: unused variable 'r' /compile maildirflags.c /load qmail-pop3d commands.o case.a timeoutread.o timeoutwrite.o maildir.o prioq.o now.o env.a strerr.a sig.a open.a getln.a stralloc.a alloc.a substdio.a error.a str.a fs.a `cat socket.lib`
[qmailtoaster] Re: newmodel upgrade script -- make: *** [chkuser.o] Error 1
qmailtoas...@infor-conseils.be wrote: *I did not make something special... I was able to install the clamav-toaster package... but for the qmail-toaster, i got the same error:* Thanks for the insight. First off, I'd recommend upgrading qmailtoaster-plus, as there is a newer qtp-newmodel available: # yum update qmailtoaster-plus Secondly, here are the pertinent errors: chkuser.c:37:45: error: /home/vpopmail/include/vpopmail.h: No such file or directory chkuser.c:38:42: error: /home/vpopmail/include/vauth.h: No such file or directory chkuser.c:39:52: error: /home/vpopmail/include/vpopmail_config.h: No such file or directory These files are not used in normal operations, but are required for building the qmail-toaster package (as you're experiencing). The easiest way to restore them would be to use qtp-newmodel to rebuild/reinstall the vpopmail-toaster package. The latest version of qtp-newmodel will allow you to select a current package for rebuilding. That should fix you up. :) -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] QControl
Hi Jake, I just upgraded (and reinstalled) one toaster that is now running CentOS 5.5 x86_64. Everything runs just smooth and lovely, except one thing. I (on purpose) removed all i386/i686 packages and libraries from CentOs and now I find that QControl is not quite noarch after all: # rpm -i QControl-1.1-1.1.1.noarch.rpm error: Failed dependencies: libc.so.6 is needed by QControl-1.1-1.1.1.noarch libc.so.6(GLIBC_2.0) is needed by QControl-1.1-1.1.1.noarch libc.so.6(GLIBC_2.1) is needed by QControl-1.1-1.1.1.noarch # locate libc.so.6 /lib64/libc.so.6 I could, of course, reinstall the i386 lib, but just in case there could be a different solution (e.g. a x86_64 compile) ... Martin -- Years ago my mother used to say to me, she'd say, 'In this world, Elwood, you must be oh so smart or oh so pleasant.' Well, for years I was smart. I recommend pleasant. James Stewart as Elwood P. Dowd in 'Harvey' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Newmodel build issues
On 10/06/2010 20:09, Eric Shubert wrote: Postmaster wrote: On 09/06/2010 23:25, Eric Shubert wrote: Postmaster wrote: On 09/06/2010 23:11, Eric Shubert wrote: Postmaster wrote: On 09/06/2010 22:40, Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Scott Hughes wrote: I am attempting to update a new QMT server. When running the newmodel script, I am getting the following: qtp-build-rpms - rpmbuild failed for clamav-toaster-0.96.1-1.3.36 qtp-build-rpms - here are the last 10 messages from the log: + '[' 0 -ne 0 ']' + cd clamav-0.96.1 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . error: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log for more details Build failed, Exiting. --- Hit ENTER to return to menu --- All other packages appeared to build without any problems. This system has had all of it's yum updates and has been rebooted. Ideas, please? Scott You know? Not that I look a bit closer, this error is from a no-brainer sort of command (chown). I wonder if fuse-unionfs isn't having a problem with COS5.5. Strangeness. When I do the commands manually (in a chroot environment, same as qtp-build-rpms does) I get no error. However, when I run the /bin/sh -e /var/tmp/rpm-tmp.80211 command, same as rpmbuild does, it ends prematurely in the same spot (chown command) with return code 1. Very peculiar. I'm going to try with a linked sandbox, which I expect will succeed. Linked sandbox works. So the problem is with fuse-unionfs and CentOS 5.5. This is a fairly low priority, but I'll continue to test to pinpoint the problem, and persue a fix. Hey Steve, I have a COS5.4 QMT with an updated kernel that I got this failure with as well. I did # yum remove fuse dkms which removed these packages with their dependencies, then reran qtp-newmodel, which reinstalled them, and it appears that qtp-newmodel has gotten past the problem part. I'll try this a little later on my test QMT 5.5 that was failing. Thought you might want to give it a try and see what you get. Well, reinstalling fuse,dkms didn't fix the problem for me on COS 5.5. I'm pretty confident that's where the problem lies though. I wonder if rebuilding them on a COS5.5 host will make it work. Doubtful. Need to ponder this some more... I have similar issue on my VPS CentOS 5.4 64 bit: Starting to build the binary rpms ...(pizza anyone?) If you want to view compile messages, you can open another terminal and: # tail -f /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log qtp-build-rpms v0.3.5 qtp-remove-pkgs v0.3.1 Building clamav-toaster-0.96.1-1.3.36 ... qtp-build-rpms - rpmbuild failed for clamav-toaster-0.96.1-1.3.36 qtp-build-rpms - here are the last 10 messages from the log: + '[' 0 -ne 0 ']' + cd clamav-0.96.1 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . error: Bad exit status from /var/tmp/rpm-tmp.72759 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.72759 (%prep) end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log for more details Build failed, Exiting. - That's so similar, it's the same! ;) I'm guessing that you're using the unionfs for sandbox? What's your kernel version? qtp-newmodel v0.3.15 starting Wed Jun 9 22:11:28 BST 2010 qtp-whatami v0.3.6 DISTRO=CentOS OSVER=5.4 QTARCH=x86_64 QTKERN=2.6.32.12-x86_64-linode12 BUILD_DIST=cnt5064 BUILD_DIR=/usr/src/redhat This machine's OS is supported and has been tested - That's a pretty new kernel. How'd you end up with that kernel on a COS 5.4 host? Yeah, this is a VPS server (Xen virtualisation). I can chose and run pretty much any kernel in a matter of seconds. Have a look at http://www.linode.com/features.cfm - Configuration profile - Postmaster, Your VPS might come in very handy here. :) Have you changed the kernel after having run qtp-newmodel with the unionfs sandbox on a previous kernel? Do you have a way to go back to the kernel that was used when you last ran qtp-newmodel successfully? (if you remember which kernel you were running then?) If so, please do so, then run qtp-newmodel test. Do you get the failure when you use the most recent COS5.5 stock kernel? (2.6.18-194.3.1.el5) Will you try: .) using 2.6.18-194.3.1.el5 kernel .) yum remove dkms fuse .) test qtp-newmodel again ? Eric, The build was successful by either way. So I can conclude that it was 5.4 version (one of its libraries) at fault. Rgds Alex
Re: [qmailtoaster] Re: Sanesecurity Warnings
On Thu, Jun 10, 2010 at 12:40 PM, Eric Shubert e...@shubes.net wrote: Scott Hughes wrote: On Jun 10, 2010, at 9:31 AM, Eric Shubert e...@shubes.net wrote: Scott Hughes wrote: On Jun 9, 2010, at 10:48 PM, Eric Shubert e...@shubes.net wrote: Scott Hughes wrote: How/where are you seeing this message? Are you seeing anything else along with it? Is it running from the cronjob, or did you run it manually? If the later, what was the command? Details, details... Eric, I found out that this message is coming from my new server that I just built. I need to find a way to mark what messages are from which server! From the log file of the new server (which is also running the latest software): Jun 09 21:39:38 INFO - Sanesecurity mirror site used: mx0.roessner-net.de 78.46.253.227 Jun 09 21:40:08 WARNING - Connection to mx0.roessner-net.de78.46.253.227 failed - Trying next mirror site... Jun 09 21:40:10 INFO - Sanesecurity mirror site used: spamcop03.sentechsa.net 66.18.67.75 Jun 09 21:40:40 WARNING - Connection to spamcop03.sentechsa.net66.18.67.75 failed - Trying next mirror site... Jun 09 21:40:41 INFO - Sanesecurity mirror site used: roxxor.lncsa.com 188.165.202.60 I get the same errors when I run it manually. I have pinged several sites to ensure that I am resolving correctly. I'm stumped at this point. Thanks, Scott - Looks like a network, possibly routing, problem off hand. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group ( www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com I would normally agree, but in this case everything seems to be okay. I pinged a couple of the Sanesecurity servers by name and was sucessful. Yum resolves and works without complaint. Strange indeed! Scott - Then firewall perhaps? I don't know which port(s) the updates are done on. -- -Eric 'shubes' Great minds think alike! I have been checking the firewall and haven't found anything. :( Scott - You might try asking on the sanesecurity users list. On gmane.org, it's gmane.comp.security.virus.clamav.sanesecurity. -- -Eric 'shubes' Well this is now solved. I just wish I know how/why. I re-ran the firewall.sh script and saved it (iptables-save) and then ran the sanesecurity update script manually. It worked. I'll watch the logs and make sure the cron job also works. Go figure... Now back to the new clamav loading issue... Scott
[qmailtoaster] automated - shell send email
friends, I wish to have a machine send me an email when the dir changes -- basically if someone ftps something. I have been successful in using dnotify to 'be aware of such a change. and I am trying to send the email with mutt here is my problem.. How do i get my qmail toaster to allow this email to be delivered. basically the mail bounces back rejected by my mail server -- i never GET the mail is it an authentication problem? should i do a smart host ( i have heard about that but do not understand it ) basically how can i execute a file.sh that will send me an email... via mutt or maybe qmail-inject (?) but frm a machine ( ftp server ) not the qmail mail server. thanks!
Re: [qmailtoaster] Re: Newmodel build issues
On Jun 10, 2010, at 3:57 PM, Eric Shubert e...@shubes.net wrote: Eric Shubert wrote: Scott Hughes wrote: I am attempting to update a new QMT server. When running the newmodel script, I am getting the following: qtp-build-rpms - rpmbuild failed for clamav-toaster-0.96.1-1.3.36 qtp-build-rpms - here are the last 10 messages from the log: + '[' 0 -ne 0 ']' + cd clamav-0.96.1 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . error: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/ build-recent.log for more details Build failed, Exiting. --- Hit ENTER to return to menu --- All other packages appeared to build without any problems. This system has had all of it's yum updates and has been rebooted. Ideas, please? Scott This gets more and more 'interesting'. I tried building and using the fuse-unionfs-0.24 package. It got past the chown command, but failed miserably later on and eventually terminated with a segfault. I'm guessing that this next version of fuse-unionfs will need the next version of a dependent package as well. So then I restored fuse-unionfs-0.23, and figured I'd try building clamav-toaster-0.96.0-1.3.35 on CentOS 5.5. I was happy to see that it worked. So I tried clamav-toaster-0.96.1-1.3.36 again. Lo and behold (and to my surprise) it worked. Dang, I didn't expect *that*. So now I'm not quite sure what to think. I expect that a clean COS5.5 install (with no kernel updates) will work with no problem. Can someone test and verify this? I don't have any 5.5 install isos handy. It appears that all systems that have experienced this problem have had their kernel updated at some point, although apparently not all updated kernels have the problem, only very recent ones. I did have one COS5.4 host w/ kernel 2.6.18-164.10.1.el5 that had the problem. On that host, I uninstalled fuse and dkms (and dependencies), and reran qtp-newmodel, which reinstalled the packages, and that proceeded to work. That didn't work on my COS5.5 test host though. At this point I'm guessing that something in the area of kernel updates is causing a problem with fuse-unionfs. Most likely, there is something that needs to be done in the fuse-unionfs (or related) package in order to remedy the situation. Don't have any idea what that would be yet. I'll try upgrading my COS4.6 host and giving that a try. Not that it'll tell much though, as that's a much older kernel (2.6.9 IIRC). I think I'll also run this by the unionfs-fuse list and see if someone there can shed some light on this. I upgrade my COS4.6 to current, then tried qmail-toaster, spamassassin-toaster and clamav-toaster all together, and clamav aborted with the error. So I upgraded qmail-toaster and spamassassin- toaster by themselves, no error. Then I did clamav-toaster by itself to get a log with only clamav-toaster, and it ran ok. WTF. It's starting to look like it's intermittent now. I hate it when that happens. :( -- -Eric 'shubes' --- --- --- --- - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com ) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! --- --- --- --- - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com I tried the same thing on my secondary server and it still has the issue. I've tried everything you have put out to the list so far and every time it fails. Bummer. Scott - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Newmodel build issues
Eric Shubert wrote: Scott Hughes wrote: I am attempting to update a new QMT server. When running the newmodel script, I am getting the following: qtp-build-rpms - rpmbuild failed for clamav-toaster-0.96.1-1.3.36 qtp-build-rpms - here are the last 10 messages from the log: + '[' 0 -ne 0 ']' + cd clamav-0.96.1 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . error: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log for more details Build failed, Exiting. --- Hit ENTER to return to menu --- All other packages appeared to build without any problems. This system has had all of it's yum updates and has been rebooted. Ideas, please? Scott This gets more and more 'interesting'. I tried building and using the fuse-unionfs-0.24 package. It got past the chown command, but failed miserably later on and eventually terminated with a segfault. I'm guessing that this next version of fuse-unionfs will need the next version of a dependent package as well. So then I restored fuse-unionfs-0.23, and figured I'd try building clamav-toaster-0.96.0-1.3.35 on CentOS 5.5. I was happy to see that it worked. So I tried clamav-toaster-0.96.1-1.3.36 again. Lo and behold (and to my surprise) it worked. Dang, I didn't expect *that*. So now I'm not quite sure what to think. I expect that a clean COS5.5 install (with no kernel updates) will work with no problem. Can someone test and verify this? I don't have any 5.5 install isos handy. It appears that all systems that have experienced this problem have had their kernel updated at some point, although apparently not all updated kernels have the problem, only very recent ones. I did have one COS5.4 host w/ kernel 2.6.18-164.10.1.el5 that had the problem. On that host, I uninstalled fuse and dkms (and dependencies), and reran qtp-newmodel, which reinstalled the packages, and that proceeded to work. That didn't work on my COS5.5 test host though. At this point I'm guessing that something in the area of kernel updates is causing a problem with fuse-unionfs. Most likely, there is something that needs to be done in the fuse-unionfs (or related) package in order to remedy the situation. Don't have any idea what that would be yet. I'll try upgrading my COS4.6 host and giving that a try. Not that it'll tell much though, as that's a much older kernel (2.6.9 IIRC). I think I'll also run this by the unionfs-fuse list and see if someone there can shed some light on this. I upgrade my COS4.6 to current, then tried qmail-toaster, spamassassin-toaster and clamav-toaster all together, and clamav aborted with the error. So I upgraded qmail-toaster and spamassassin-toaster by themselves, no error. Then I did clamav-toaster by itself to get a log with only clamav-toaster, and it ran ok. WTF. It's starting to look like it's intermittent now. I hate it when that happens. :( -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Newmodel build issues
Postmaster wrote: On 10/06/2010 20:09, Eric Shubert wrote: Postmaster wrote: On 09/06/2010 23:25, Eric Shubert wrote: Postmaster wrote: On 09/06/2010 23:11, Eric Shubert wrote: Postmaster wrote: On 09/06/2010 22:40, Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Scott Hughes wrote: I am attempting to update a new QMT server. When running the newmodel script, I am getting the following: qtp-build-rpms - rpmbuild failed for clamav-toaster-0.96.1-1.3.36 qtp-build-rpms - here are the last 10 messages from the log: + '[' 0 -ne 0 ']' + cd clamav-0.96.1 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . error: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log for more details Build failed, Exiting. --- Hit ENTER to return to menu --- All other packages appeared to build without any problems. This system has had all of it's yum updates and has been rebooted. Ideas, please? Scott You know? Not that I look a bit closer, this error is from a no-brainer sort of command (chown). I wonder if fuse-unionfs isn't having a problem with COS5.5. Strangeness. When I do the commands manually (in a chroot environment, same as qtp-build-rpms does) I get no error. However, when I run the /bin/sh -e /var/tmp/rpm-tmp.80211 command, same as rpmbuild does, it ends prematurely in the same spot (chown command) with return code 1. Very peculiar. I'm going to try with a linked sandbox, which I expect will succeed. Linked sandbox works. So the problem is with fuse-unionfs and CentOS 5.5. This is a fairly low priority, but I'll continue to test to pinpoint the problem, and persue a fix. Hey Steve, I have a COS5.4 QMT with an updated kernel that I got this failure with as well. I did # yum remove fuse dkms which removed these packages with their dependencies, then reran qtp-newmodel, which reinstalled them, and it appears that qtp-newmodel has gotten past the problem part. I'll try this a little later on my test QMT 5.5 that was failing. Thought you might want to give it a try and see what you get. Well, reinstalling fuse,dkms didn't fix the problem for me on COS 5.5. I'm pretty confident that's where the problem lies though. I wonder if rebuilding them on a COS5.5 host will make it work. Doubtful. Need to ponder this some more... I have similar issue on my VPS CentOS 5.4 64 bit: Starting to build the binary rpms ...(pizza anyone?) If you want to view compile messages, you can open another terminal and: # tail -f /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log qtp-build-rpms v0.3.5 qtp-remove-pkgs v0.3.1 Building clamav-toaster-0.96.1-1.3.36 ... qtp-build-rpms - rpmbuild failed for clamav-toaster-0.96.1-1.3.36 qtp-build-rpms - here are the last 10 messages from the log: + '[' 0 -ne 0 ']' + cd clamav-0.96.1 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . error: Bad exit status from /var/tmp/rpm-tmp.72759 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.72759 (%prep) end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log for more details Build failed, Exiting. - That's so similar, it's the same! ;) I'm guessing that you're using the unionfs for sandbox? What's your kernel version? qtp-newmodel v0.3.15 starting Wed Jun 9 22:11:28 BST 2010 qtp-whatami v0.3.6 DISTRO=CentOS OSVER=5.4 QTARCH=x86_64 QTKERN=2.6.32.12-x86_64-linode12 BUILD_DIST=cnt5064 BUILD_DIR=/usr/src/redhat This machine's OS is supported and has been tested - That's a pretty new kernel. How'd you end up with that kernel on a COS 5.4 host? Yeah, this is a VPS server (Xen virtualisation). I can chose and run pretty much any kernel in a matter of seconds. Have a look at http://www.linode.com/features.cfm - Configuration profile - Postmaster, Your VPS might come in very handy here. :) Have you changed the kernel after having run qtp-newmodel with the unionfs sandbox on a previous kernel? Do you have a way to go back to the kernel that was used when you last ran qtp-newmodel successfully? (if you remember which kernel you were running then?) If so, please do so, then run qtp-newmodel test. Do you get the failure when you use the most recent COS5.5 stock kernel? (2.6.18-194.3.1.el5) Will you try: .) using 2.6.18-194.3.1.el5 kernel .) yum remove dkms fuse .) test qtp-newmodel again ? Hey Alex, The build was successful by either way. Which ways? I'm not sure which ones you're referring to. So I can
Re: [qmailtoaster] Re: Newmodel build issues
On 10/06/2010 21:53, Eric Shubert wrote: Postmaster wrote: On 10/06/2010 20:09, Eric Shubert wrote: Postmaster wrote: On 09/06/2010 23:25, Eric Shubert wrote: Postmaster wrote: On 09/06/2010 23:11, Eric Shubert wrote: Postmaster wrote: On 09/06/2010 22:40, Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Eric Shubert wrote: Scott Hughes wrote: I am attempting to update a new QMT server. When running the newmodel script, I am getting the following: qtp-build-rpms - rpmbuild failed for clamav-toaster-0.96.1-1.3.36 qtp-build-rpms - here are the last 10 messages from the log: + '[' 0 -ne 0 ']' + cd clamav-0.96.1 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . error: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log for more details Build failed, Exiting. --- Hit ENTER to return to menu --- All other packages appeared to build without any problems. This system has had all of it's yum updates and has been rebooted. Ideas, please? Scott You know? Not that I look a bit closer, this error is from a no-brainer sort of command (chown). I wonder if fuse-unionfs isn't having a problem with COS5.5. Strangeness. When I do the commands manually (in a chroot environment, same as qtp-build-rpms does) I get no error. However, when I run the /bin/sh -e /var/tmp/rpm-tmp.80211 command, same as rpmbuild does, it ends prematurely in the same spot (chown command) with return code 1. Very peculiar. I'm going to try with a linked sandbox, which I expect will succeed. Linked sandbox works. So the problem is with fuse-unionfs and CentOS 5.5. This is a fairly low priority, but I'll continue to test to pinpoint the problem, and persue a fix. Hey Steve, I have a COS5.4 QMT with an updated kernel that I got this failure with as well. I did # yum remove fuse dkms which removed these packages with their dependencies, then reran qtp-newmodel, which reinstalled them, and it appears that qtp-newmodel has gotten past the problem part. I'll try this a little later on my test QMT 5.5 that was failing. Thought you might want to give it a try and see what you get. Well, reinstalling fuse,dkms didn't fix the problem for me on COS 5.5. I'm pretty confident that's where the problem lies though. I wonder if rebuilding them on a COS5.5 host will make it work. Doubtful. Need to ponder this some more... I have similar issue on my VPS CentOS 5.4 64 bit: Starting to build the binary rpms ...(pizza anyone?) If you want to view compile messages, you can open another terminal and: # tail -f /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log qtp-build-rpms v0.3.5 qtp-remove-pkgs v0.3.1 Building clamav-toaster-0.96.1-1.3.36 ... qtp-build-rpms - rpmbuild failed for clamav-toaster-0.96.1-1.3.36 qtp-build-rpms - here are the last 10 messages from the log: + '[' 0 -ne 0 ']' + cd clamav-0.96.1 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . error: Bad exit status from /var/tmp/rpm-tmp.72759 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.72759 (%prep) end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log for more details Build failed, Exiting. - That's so similar, it's the same! ;) I'm guessing that you're using the unionfs for sandbox? What's your kernel version? qtp-newmodel v0.3.15 starting Wed Jun 9 22:11:28 BST 2010 qtp-whatami v0.3.6 DISTRO=CentOS OSVER=5.4 QTARCH=x86_64 QTKERN=2.6.32.12-x86_64-linode12 BUILD_DIST=cnt5064 BUILD_DIR=/usr/src/redhat This machine's OS is supported and has been tested - That's a pretty new kernel. How'd you end up with that kernel on a COS 5.4 host? Yeah, this is a VPS server (Xen virtualisation). I can chose and run pretty much any kernel in a matter of seconds. Have a look at http://www.linode.com/features.cfm - Configuration profile - Postmaster, Your VPS might come in very handy here. :) Have you changed the kernel after having run qtp-newmodel with the unionfs sandbox on a previous kernel? Do you have a way to go back to the kernel that was used when you last ran qtp-newmodel successfully? (if you remember which kernel you were running then?) If so, please do so, then run qtp-newmodel test. Do you get the failure when you use the most recent COS5.5 stock kernel? (2.6.18-194.3.1.el5) Will you try: .) using 2.6.18-194.3.1.el5 kernel .) yum remove dkms fuse .) test qtp-newmodel again ? Hey Alex, The build was successful by either way. Which ways? I'm not
Re: [qmailtoaster] QControl
On 06/10/2010 02:45 PM, Martin Waschbuesch wrote: Hi Jake, I just upgraded (and reinstalled) one toaster that is now running CentOS 5.5 x86_64. Everything runs just smooth and lovely, except one thing. I (on purpose) removed all i386/i686 packages and libraries from CentOs and now I find that QControl is not quite noarch after all: # rpm -i QControl-1.1-1.1.1.noarch.rpm error: Failed dependencies: libc.so.6 is needed by QControl-1.1-1.1.1.noarch libc.so.6(GLIBC_2.0) is needed by QControl-1.1-1.1.1.noarch libc.so.6(GLIBC_2.1) is needed by QControl-1.1-1.1.1.noarch # locate libc.so.6 /lib64/libc.so.6 I could, of course, reinstall the i386 lib, but just in case there could be a different solution (e.g. a x86_64 compile) ... Thanks for finding this. Seems I'll have to create two builds in the future. There won't be a fix until I create the next version. If it's REALLY an issue for you, I'll compile on a x86_64 for you and send you the executable. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Newmodel build issues
Scott Hughes wrote: On Jun 10, 2010, at 3:57 PM, Eric Shubert e...@shubes.net wrote: Eric Shubert wrote: Scott Hughes wrote: I am attempting to update a new QMT server. When running the newmodel script, I am getting the following: qtp-build-rpms - rpmbuild failed for clamav-toaster-0.96.1-1.3.36 qtp-build-rpms - here are the last 10 messages from the log: + '[' 0 -ne 0 ']' + cd clamav-0.96.1 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . error: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.10862 (%prep) end of log messages qtp-build-rpms - see /mnt/qtp-sandbox/usr/src/qtp-upgrade/log/build-recent.log for more details Build failed, Exiting. --- Hit ENTER to return to menu --- All other packages appeared to build without any problems. This system has had all of it's yum updates and has been rebooted. Ideas, please? Scott This gets more and more 'interesting'. I tried building and using the fuse-unionfs-0.24 package. It got past the chown command, but failed miserably later on and eventually terminated with a segfault. I'm guessing that this next version of fuse-unionfs will need the next version of a dependent package as well. So then I restored fuse-unionfs-0.23, and figured I'd try building clamav-toaster-0.96.0-1.3.35 on CentOS 5.5. I was happy to see that it worked. So I tried clamav-toaster-0.96.1-1.3.36 again. Lo and behold (and to my surprise) it worked. Dang, I didn't expect *that*. So now I'm not quite sure what to think. I expect that a clean COS5.5 install (with no kernel updates) will work with no problem. Can someone test and verify this? I don't have any 5.5 install isos handy. It appears that all systems that have experienced this problem have had their kernel updated at some point, although apparently not all updated kernels have the problem, only very recent ones. I did have one COS5.4 host w/ kernel 2.6.18-164.10.1.el5 that had the problem. On that host, I uninstalled fuse and dkms (and dependencies), and reran qtp-newmodel, which reinstalled the packages, and that proceeded to work. That didn't work on my COS5.5 test host though. At this point I'm guessing that something in the area of kernel updates is causing a problem with fuse-unionfs. Most likely, there is something that needs to be done in the fuse-unionfs (or related) package in order to remedy the situation. Don't have any idea what that would be yet. I'll try upgrading my COS4.6 host and giving that a try. Not that it'll tell much though, as that's a much older kernel (2.6.9 IIRC). I think I'll also run this by the unionfs-fuse list and see if someone there can shed some light on this. I upgrade my COS4.6 to current, then tried qmail-toaster, spamassassin-toaster and clamav-toaster all together, and clamav aborted with the error. So I upgraded qmail-toaster and spamassassin-toaster by themselves, no error. Then I did clamav-toaster by itself to get a log with only clamav-toaster, and it ran ok. WTF. It's starting to look like it's intermittent now. I hate it when that happens. :( -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com I tried the same thing on my secondary server and it still has the issue. I've tried everything you have put out to the list so far and every time it fails. Bummer. Scott - I'm actually glad to hear this. If it can be recreated, it's easier to fix. It's the intermittent bugs that drive me nuts. BTW, the verdict is still out on CentOS4.6. I notice that my test host isn't running the latest kernel. Maybe when I boot with the latest kernel it will fail again? (Although it did fail once). -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail:
[qmailtoaster] Scheduled downtime
I will be taking the Qmailtoaster mail server offline for about an hour on Saturday evening, after 9pm EST. This will only affect the mailing list and email to me. The website will not experience any downtime. Thanks. - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Two Questions
1) Is there a wiki entry for setting up DKIM? It seems like there was, but for the life of me I can't seem to find it. 2) Is anyone using the FuzzyOCR spamassassin plugin? If so, how is it working for you? Thanks, Scott
[qmailtoaster] Re: Two Questions
Scott Hughes wrote: 1) Is there a wiki entry for setting up DKIM? It seems like there was, but for the life of me I can't seem to find it. I don't recall one off hand. I believe one of the videos covers it. 2) Is anyone using the FuzzyOCR spamassassin plugin? If so, how is it working for you? Not me. I haven't really seen a need for it since spamdyke came along. :) -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] automated - shell send email
I think I am going to try this http://systems.takizo.com/2010/03/26/configure-smarthost-smtp-authentication-on-postfix/ Jim Shupert wrote: friends, I wish to have a machine send me an email when the dir changes -- basically if someone ftps something. I have been successful in using dnotify to 'be aware of such a change. and I am trying to send the email with mutt here is my problem.. How do i get my qmail toaster to allow this email to be delivered. basically the mail bounces back rejected by my mail server -- i never GET the mail is it an authentication problem? should i do a smart host ( i have heard about that but do not understand it ) basically how can i execute a file.sh that will send me an email... via mutt or maybe qmail-inject (?) but frm a machine ( ftp server ) not the qmail mail server. thanks!
Re: [qmailtoaster] Re: Two Questions
On 6/10/10 8:59 PM, Eric Shubert wrote: Scott Hughes wrote: 1) Is there a wiki entry for setting up DKIM? It seems like there was, but for the life of me I can't seem to find it. I don't recall one off hand. I believe one of the videos covers it. 2) Is anyone using the FuzzyOCR spamassassin plugin? If so, how is it working for you? Not me. I haven't really seen a need for it since spamdyke came along. :) Cool. Thanks for the feedback! Scott - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: automated - shell send email
Jim Shupert wrote: I think I am going to try this http://systems.takizo.com/2010/03/26/configure-smarthost-smtp-authentication-on-postfix/ Jim Shupert wrote: friends, I wish to have a machine send me an email when the dir changes -- basically if someone ftps something. I have been successful in using dnotify to 'be aware of such a change. and I am trying to send the email with mutt here is my problem.. How do i get my qmail toaster to allow this email to be delivered. basically the mail bounces back rejected by my mail server -- i never GET the mail is it an authentication problem? should i do a smart host ( i have heard about that but do not understand it ) basically how can i execute a file.sh that will send me an email... via mutt or maybe qmail-inject (?) but frm a machine ( ftp server ) not the qmail mail server. thanks! That'll do ok on a local LAN, but beware that the password will be sent in the clear. :( Using tls as well as authentication ensures that passwords aren't sent in the clear, regardless of the authentication type used. Here's what I do (I have a Tomboy note for it): # cd /etc/pki/tls/certs # make postfix.pem # vi /etc/aliases: root: sysad...@domain.com # newaliases # vi /etc/postfix/sasl_passwd: mail.domain.com:587 submiss...@domain.com:password # chmod 600 sasl_passwd # postmap /etc/postfix/sasl_passwd # vi /etc/postfix/main.cf: myorigin = $myhostname (or fqdn) #mydestination = mynetworks_style = host relayhost = mail.domain.com:587 smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = smtp_use_tls = yes smtp_tls_CAfile = /etc/pki/tls/certs/postfix.pem smtp_tls_session_cache_database = btree:/var/run/smtp_tls_session_cacheworks_style = host -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] QControl
Hi Jake, Am 11.06.2010 um 01:53 schrieb Jake Vickers: Thanks for finding this. Seems I'll have to create two builds in the future. There won't be a fix until I create the next version. If it's REALLY an issue for you, I'll compile on a x86_64 for you and send you the executable. No, that's alright. As long as it's on your todo list somewhere that's fine with me. :-) Martin - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
