Hello all,
this is my first experience with Bacula so please bear with me...
I've been searching the archives for a way to configure Bacula to access
the HP Storagework 1/8 that we want to use but I can't find anything on
them...
Has anyone managed to get such a device working?
TIA,
Martin
--
On Sat, 2007-09-08 at 22:26 +0200, Peter Buschman wrote:
> Try the current version of mtx-changer from SVN. I fixed a bug a few
> weeks ago that was preventing the drive ready detection from working
> properly (hence, no wait loop after issuing a tape load command). A
> sleep statement in the
Try the current version of mtx-changer from SVN. I fixed a bug a few
weeks ago that was preventing the drive ready detection from working
properly (hence, no wait loop after issuing a tape load command). A
sleep statement in the right place would have cured the symptom but
not the root cause
On Fri, 2007-09-07 at 23:04 -0700, Andy Hughes wrote:
> Martin,
>
> I also setup a system with and HP Storageworks 1/8 using LTO2 in the past 3
> weeks. The only change I had to make was to add a sleep statement or two in
> the mtx-changer script.
Would you be kind enough to share your mtx-cha
]
Subject: Re: [Bacula-users] HP Storagework 1/8
Hi there,
Yes, it seems to Work out of the box. I have one myself.
Just didn't submitted a compatibility report so that it could be included in
the supported list because my tests weren't that exaustive.
My server just got back up after a
neiro
-Mensagem original-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de Chris Howells
Enviada: sexta-feira, 7 de Setembro de 2007 14:08
Para: bacula-users@lists.sourceforge.net
Assunto: Re: [Bacula-users] HP Storagework 1/8
Martin Mielke wrote:
> I've been searchi
Martin Mielke wrote:
> I've been searching the archives for a way to configure Bacula to access the
> HP Storagework 1/8 that we want to use but I can't find anything on them...
It will probably just work.
First of all try using mtx to control the changer.
Then try using it is a normal tape dr
Hello all,
this is my first experience with Bacula so please bear with me...
I've been searching the archives for a way to configure Bacula to access the HP
Storagework 1/8 that we want to use but I can't find anything on them...
Has anyone managed to get such a device working?
TIA,
Martin
--