I am still waiting on response, Anyone got idea ??
Thanks
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Kumar, Narinder
Sent: Wednesday, 11 November 2009 5:25 PM
To: 'OSL Group'
Subject: [OSL | CCIE_Voice] Unity Connection User Import
Michael,
My understanding was older CUCM servers ( 4.x and early 5.x ) sent
signalling out at AF31, also I thought I remembered something about CIPC not
sending traffic out with right markings. I was trying to do a "catch all"
to match any type of signaling be it either CS3 or AF31.
And the poli
Are the voice messages on CUE stored in .wave files, I am in a situation where
I need to copy the user voicemessages ( if it's some .wave files) and send them
as an attachement to their emails. I don't have acces to CUE and will
appreciate if someone can help me verify it.
Appreciate your help
wikipedia is probably a good start. From there you can go directly to the
source, etc.
I guess since Cisco uses "standards based" (for the most part) protocols, etc
they leave it up to the reader to seek out and find information for certain
topics that are not explained in their documentation
That's looking better. Check your policed-dscp line to ONLY meet your
requirements.
Check the command reference and 3750 Switch COnfiguration guide - QoS chapter
on that police command. I haven't looked at that or remember if it's correct.
Pay attention to what Farkas said. Look at other docu
Michael and Farkas,
Okay, I have thought about what you mentioned. Here is my revised
approach. Let me know what you think about this way:
!
mls qos map policed-dscp 0 24 to 8
mls qos map cos-dscp 0 8 16 24 32 46 48 56
mls qos
!
!
class-map match-any SCCP-Traffic
match ip dscp cs3 af31
!
!
Was this ever answered? I agree that the built in doc and PDFs don't go into
any detail. I think I remember briefly talking about it in bootcamp, but
everybody pretty much said they've never changed it.
Thanks,
Kevin
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onl
Monday nights and 5 AM to 6 AM in the morning are my SRND times along
with reading all of the e-mails from the group.
I am assuming that is enough for OEQ. (Insert "assume" joke here.) I
have also read the Enterprise parameters and am about halfway through
the Service parameters for UCM.
T
Here are some hints for you to research:
I believe there is an error in one of the class-maps. See if you can find it
or agree.
I believe you have too much extra stuff configured, let’s eliminate the
unneeded stuff.
How about use match IP protocol instead of access-lists?
Are you sure your a
I have heard from anyone as of yet. Does anyone have working ASA config
they are using for PL for HW phone access?
Thank you,
Jefferson
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
>From my understanding there is no real way of seeing that on CUCM. You
can possible do some ACL logging to the closest point aka HQ 3750 to
see if dhcp requests are indeed flowing.
On 11/11/09, Jefferson Wilson wrote:
> Based on the fact the UCM doesn't have a "show ip dhcp binding" command
> of
Based on the fact the UCM doesn't have a "show ip dhcp binding" command
of some sorts I wonder if there is a run slq * command of some kind.
I found once that I had to reset the DHCP monitor service for DHCP to
work. I had a good config but stressed over "what am I missing."
What is a good
Hello everyone.
I am attempting to create the following QoS policy on a 3750 port with an
IP Phone plugged in behind it.
The policy will police signalling ( SCCP ) 32k down to 8k and remark to DSCP
8. I have read through most of the SRND guide for the 3750, the model I am
following is the:
297
I had a similar problem in my home lab while redoing lab 1a and had to reset
like Amp said.
On Fri, Nov 6, 2009 at 3:27 PM, vccie2010 wrote:
> Seems like phone must have been reg as SIP in previous session and was not
> able to load SCCP FW from CME. May be someone from IPX can shed some light
>
I'm still around.. just in stealth mode :)
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Vik Malhi
Sent: Wednesday, November 11, 2009 12:13 AM
To: Aamir Panjwani; Kumar, Narinder; Robert McGhee; OSL Group
Subject: Re: [OSL | CCIE_Voice]
The adhoc conference in SRST is only 3 party conference.
Max-conference 2 - Good for 2 ..3 party conference
No need of any dspfarm profile 2 conf etc.
BTW did you jump into the command section of call-man-fallback and actually see
any commands about registering the hardware conf.
From: ccie
- next part --
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/2009/c011d099/attachment-0001.htm
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Yes you are missing subscriber CSS.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Omotayo
Sent: Wednesday, 11 November 2009 11:47 PM
To: OSL Group
Subject: [OSL | CCIE_Voice] BLF/SpeedDial
Hello,
Am trying to get BLF/SpeedDial to work
Lol. I'm still here. I'm trying to get an IP phone to register to my
Commodore 64. I might need help. Lol
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Vik Malhi
Sent: Wednesday, November 11, 2009 12:13 AM
To: Aamir Panjwani; Kumar
Hello,
Am trying to get BLF/SpeedDial to work
Presence has been sucesfully integrated to the UCM
After assigning the BLF to phone A to montor phone B on extension 5003
When there is a call on extension 5003. i do not receive any notification. i
guess am missing something out
Any ideas
___
Hello,
Am not going to input service Unified CM ?
i will try it and feed you back
Regards
On Wed, Nov 11, 2009 at 1:27 PM, Aamir Panjwani <
aamir.panjw...@ivision.com.au> wrote:
> HQ-RTR(config)#application
>
> HQ-RTR(config)# service cmm http……..
>
>
>
> Yes MVA number in service parameter a
HQ-RTR(config)#application
HQ-RTR(config)# service cmm http
Yes MVA number in service parameter and media resources is same
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Omotayo
Sent: Wednesday, 11 November 2009 10:
Hello,
Am trying to configure Mobile Access. i cant seem to understand it.
Checking through the Feature and services of the Callmanager.
How to i Load the VXML application from the Cisco Unified Communications
Manager server (Publisher).
Any one wih an idea.
R2-RTR(config)#call application voi
Congrats mate. That is a really big achievement, especially passing on the
first go ;)
On Tue, Nov 10, 2009 at 7:50 PM, Aamir Panjwani <
aamir.panjw...@ivision.com.au> wrote:
> Just got my results and I have nailed it! That was my first attempt for
> any ccie lab. Huge relieve I still can’t be
Hello everyone,
If you wanted to limit the number of conferences in SRST mode to 2, AND
limit those conferences to a maximum of 3 participants, would the following
be the proper approach?
!
call-manager-fallback
max-conference 2 ( where X would represent the total number of
conferences allowe
Hello,
i have added he userid to the phone and now i can use the mobility button
but i still do not see "IN Use Remote"
Any ideas?
Regards
On Tue, Nov 10, 2009 at 4:28 PM, Jeff Knuckle wrote:
> Do you have and user account assigned to the IP Phone and does the user
> account have the ‘Enable Mo
26 matches
Mail list logo