Hi,
How can i verify that UCCX is using G729 codec native
Thnajs
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Hi,
How can i verify that UCCX is using G729 codec native
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Thanks for your reply its fine that we have select G729 codec under System
Parametes but my question was is there a way to test which shows UCCX is
using g729 codec native
On Sun, Jun 16, 2013 at 1:15 PM, OSL StudyList collaboration.c...@gmail.com
wrote:
Go to CCX admin and look under
Hi,
I think the easiest way is to check UCCX Service Parameters under System
menu.
--Somphol.
--Somphol
On Sun, Jun 16, 2013 at 7:36 PM, CISCO CCIE VOICE ccievoic...@gmail.comwrote:
Hi,
How can i verify that UCCX is using G729 codec native
Thanks
After i configure UCCX with codec g729 under service parameter,if i call to
UCCX trigger number let say 5000 from HQ or Branch 1 or PSTN how do i know
that this call has been using g729 uccx native codec not that from region
On Sun, Jun 16, 2013 at 2:41 PM, Somphol Boonjing somp...@gmail.com
Doubt this is the issue in the lab but you never know.
If the phones are not registered, I doubt that anyone would expect the ring
list to work
Sent from my iPad
On Jun 15, 2013, at 10:40 PM, nielsenj niels...@gmail.com wrote:
or
Establish a working call and use your show voice commands?
Sent from my iPad
On Jun 16, 2013, at 6:30 AM, CISCO CCIE VOICE ccievoic...@gmail.com wrote:
Thanks for your reply its fine that we have select G729 codec under System
Parametes but my question was is there a way to test which
Thanks Bill,but if i Press question mark 2 time thn i can see its taking
g729 codec that fine but ths result can be due to Region not from UCCX G729
Codec
On Sun, Jun 16, 2013 at 3:37 PM, Bill Talley bill.tal...@aos5.com wrote:
On the IP phone, press the question mark button twice.
On the
I have Branch 2 site which contains Transcoder moreover all my agents are
in Branch-2 site i have region matrix between other region
On Sun, Jun 16, 2013 at 4:54 PM, Bill Talley bill.tal...@aos5.com wrote:
Do you have a transcoder setup and being used for the call? If so,
check the SCCC
Thanks bill got your point
On Sun, Jun 16, 2013 at 5:13 PM, Bill Talley bill.tal...@aos5.com wrote:
Any transcoder for ccx would be at HQ unless the ccx server is not in
HQ. looks like a few people have forwarded viable suggestions so you
should be able to determine what you're asking
Pressing the ? Twice will in fact give u the results your looking for. The
region setting on UCM will set the codec that u suoport during call setup on
the phone and the system param settings for UCCX set the codec you support for
call setup. Thus as long as you have overlapping or at least
Dear Experts,
I'd like to configure on CUCM when I dial *Extension then I can reach the
voicemail of the person directly and says Sorry Extension 1130 is not
available please record ur message
In V7 I just make a CTI Route Point with extension * on the internal
partition then forward all to
Dear All.
I have configured H323 Gateway to use the 4 FXO ports on the router with
CUCM.
When I call in to the POTS line sometimes its working perfectly and
sometimes when I call in it give me like a faxtone and i hear no voice then
I drop the call and call again it works.
Also , There is a big
Dear All,
I'd like to block 91900 pattern efficient the CUCM.
What's the best and most efficent practice to do that?
Many Thanks,
Hesham
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a
Dear All,
I have a SIP Circuit to Verizon and when I call out I hear 3 rings first
before the call is actually routed to the PSTN.
Also , I have Automated Attendant and when I dial in to the AA the first 3
seconds are cut from the prompt?
Any Ideas what parameters should I change to fix that.
Hi Hesham,
Do you have the VMbox mask set on the VM profile to strip the * ? ie
to send 1130 intead of *1130.
Marty
On Sun, Jun 16, 2013 at 11:28 AM, Hesham Abdelkereem
heshamcentr...@gmail.com wrote:
Dear Experts,
I'd like to configure on CUCM when I dial *Extension then I can
Do you think sharing your config might help?
On Sun, Jun 16, 2013 at 10:51 AM, Hesham Abdelkereem
heshamcentr...@gmail.com wrote:
Dear All.
I have configured H323 Gateway to use the 4 FXO ports on the router with
CUCM.
When I call in to the POTS line sometimes its working perfectly and
of course
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
h323
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
!
voice class h323 1
h225 timeout tcp establish 3
h225
hi all,
yes i upload to both server and same method as Bill mention here.
and when I file view tftp ringlist.xml i did not see the 'are you there
anymore.
but in my phones , even after few TFTP and phone restart , i still see the are
you there
From: Bill
thanks i will try this if replicate the same in my home lab
From: nielsenj niels...@gmail.com
To: Bill Lake whl...@gmail.com
Cc: Karen Johnson karen.johnson...@yahoo.ca; CCIE Study
ccie_voice@onlinestudylist.com; William Calvache
williamcalva...@outlook.com
when do MGCP, i come across service parameter Change B-Channel Maintenance
Status and they only have 5 box.
- does that mean in one cluster we can have 5 GW that use partial PRI with MGCP
?
- if i plan to use partial PRI in MGCP, do i need to also busy out above
paramater or
pri-group
I would do the config manually on the gateway and not worry about this in the
real world
Sent from my iPhone
On Jun 16, 2013, at 4:25 PM, Karen Johnson karen.johnson...@yahoo.ca wrote:
when do MGCP, i come across service parameter Change B-Channel Maintenance
Status and they only have 5
Do a debug tftp server and see if you r getting the file to the phone
Ex
On Jun 16, 2013, at 2:10 PM, Karen Johnson karen.johnson...@yahoo.ca wrote:
hi all,
yes i upload to both server and same method as Bill mention here.
and when I file view tftp ringlist.xml i did not see the 'are you
Karen,
Those parameters are old story. The were used back in the 6608 days, have
no use on the current MGCP GW. If you configure your PRI as fractional with
less timeslots, CUCM would audit the port and the GW report back an error
for that endpoint, CUCM will then mark it out of service
You should look into Early offer and Early media. Perhaps you might need
PRACK enabled, to cut throught the audio before the call connects. Usually
your Telco can give the specific requirements you need.
On Sun, Jun 16, 2013 at 8:53 AM, Hesham Abdelkereem
heshamcentr...@gmail.com wrote:
Dear
Specific translation pattern with Block this Pattern.
On Sun, Jun 16, 2013 at 8:51 AM, Hesham Abdelkereem
heshamcentr...@gmail.com wrote:
Dear All,
I'd like to block 91900 pattern efficient the CUCM.
What's the best and most efficent practice to do that?
Many Thanks,
Hesham
+50689389544
http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
CCNP, CCNP Voice
-- next part --
An HTML attachment was scrubbed...
URL: /archives/ccie_voice/attachments/20130616/bfa52ff6/attachment.html
-- next part --
A non-text attachment
27 matches
Mail list logo
