Joerg Schilling [EMAIL PROTECTED]MacArthur, Ian (UK) wrote:
Hi Jörg,
As this happens after 1 MB (= than the RAM size) it may be a
buffer underrun.
Check transfer speeds.
It however looks like the drives does not like the medium.
Call cdrecord -atip
Hmm, I'm not sure - I managed
On Mon, Nov 17, 2003 at 10:50:46PM +0100, obarrot wrote:
Hi, I can't use my CD-ATAPI cdrom with xcdroast + the ide-scsi.o module
Judging from the version of cdrecord you used, I guess you are using
a really ancient version of xcdroast. (alpha9? current is alpha15)
One that does not support
On 13 Nov, Joerg Schilling wrote:
From: Lourens Veen [EMAIL PROTECTED]
On Wed 12 November 2003 11:33, Helmut Jarausch wrote:
I can't remember the version, but I'm quite sure it was a 2.01a*
version.
I'll try to use the driver under Win2K first, to check if it's a
hardware problem.
Okay.
On Mit, 26 Nov 2003, Helmut Jarausch wrote:
have gone. So it must be related to Plextor+Linux+DMA .
On my private PC at home (a newer Plextor 48x) I cannot access
the drive at all when DMA is enabled (even a simple 'mount' of an
ISO filesystem hangs) and the kernel log tells about a DMA
Novenove Booking presenta :
Chew-Z
Dopo un anno di attesa e alcuni cambi si formazione parte il 15 gennaio 2004
il tour dei Chew-Z (componenti dei Ciaff, Narcolexia, Undertakers).
Bisca (Manca solo un attimo - CNI-RAI TRADE)
Bisca torna a proporci la sua musica e la sua visione del mondo. Dal
I've been using growisofs to burn to /dev/scd0 with success.
I'm using a PX-708A with DVD+R Verbatim disks.
But its very slow.
So I read up and it looks like if I can burn using the
raw io interface after binding /dev/scd0 to /dev/raw/raw1.
I get this error message from growisofs -Z
I used windows to upgrade the firmware to 1.03. Once you go past 1.01
to 1.02 or 1.03 you can't flash it back to 1.01. You can flash back to
1.02 from 1.03.
I have not tried cdrecord at all yet except for cd-r media so I can't
say whether I also exhibit any problems.
If you let me know what
Rob,
It's probably just a coincidence, but I thought I'd better
ask in case there were any known issues, as at present my
*cheap* DVD burner has turned in to an *expensive* CD reader...
Which is inconvenient, to say the least!
I have to say that this looks almost identical to the
FUEL SAVER PRO
This revolutionary device Boosts Gas Mileage 27%+ by helping fuel burn better using
three patented processes from General Motors.
www.bb4n.org/?axel=49
PROVEN TECHNOLOGY
A certified U.S. Environmental Protection Agency (EPA) laboratory recently completed
tests on the new Fuel
I'm trying to get my LG GSA-4040B attached to a RedHat 8 box burn a iso doing
dvdrecord -v dev=0,0,0 -dao -dummy /iso/shrike-i386-disc1.iso, but nothing
is written and I'm note sure what the error is. The disk is a DVD-R.
-Ole Jacob
dvdrtools v0.1.3
Portions (c) 2002 Red Hat, Inc.
Based on:
On Mon 24 November 2003 13:20, Ole Jacob Taraldset wrote:
I'm trying to get my LG GSA-4040B attached to a RedHat 8 box burn
a iso doing dvdrecord -v dev=0,0,0 -dao -dummy
/iso/shrike-i386-disc1.iso, but nothing is written and I'm note
sure what the error is. The disk is a DVD-R.
dvdrecord is
* Ole Jacob Taraldset ([EMAIL PROTECTED]) wrote:
I'm trying to get my LG GSA-4040B attached to a RedHat 8 box burn a iso doing
dvdrecord -v dev=0,0,0 -dao -dummy /iso/shrike-i386-disc1.iso, but nothing
this is the cause...
pgp0.pgp
Description: PGP
From [EMAIL PROTECTED] Fri Nov 21 22:03:53 2003
Why do you believe that the drive does not work at all with cdrecord?
I could use it with my tests...
Well, just read my threads in the list for details.
Well, I thought this was a growisofs specific thread and did not read it
I have
Hi,
short question:
Does cdrtools work on a linux 2.6.0 based machine ?
Thank you very much in advance for your help.
Kind regards,
M.Cramer
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Why do you believe that the drive does not work at all with cdrecord?
I could use it with my tests...
Well, just read my threads in the list for details.
In short: when I had the NEC before, I used proDVD for recording
DVD+R without problems - but DVD-R did not work (find a lot of
details/logs
[List seems to be down!?
At least Debian-archive, and mail-archive did not get
updated since Friday..
]
I used windows to upgrade the firmware to 1.03. Once you go past 1.01
to 1.02 or 1.03 you can't flash it back to 1.01. You can flash back to
1.02 from 1.03.
I know that. Am still at
[List seems to be down!?
At least Debian-archive, and mail-archive did not get
updated since Friday..
]
It is a known fact that the firmware in the 708 is not what I would expect.
If you insert a medium that it doesnt like, then it behaves as if the drive
is broken. People who don't know
I used windows to upgrade the firmware to 1.03. Once you go past 1.01
to 1.02 or 1.03 you can't flash it back to 1.01. You can flash back to
1.02 from 1.03.
I have not tried cdrecord at all yet except for cd-r media so I can't
say whether I also exhibit any problems.
If you let me know what
I'm trying to get my LG GSA-4040B attached to a RedHat 8 box burn a iso doing
dvdrecord -v dev=0,0,0 -dao -dummy /iso/shrike-i386-disc1.iso, but nothing
is written and I'm note sure what the error is. The disk is a DVD-R.
-Ole Jacob
dvdrtools v0.1.3
Portions (c) 2002 Red Hat, Inc.
Based on:
On Mit, 26 Nov 2003, Helmut Jarausch wrote:
have gone. So it must be related to Plextor+Linux+DMA .
On my private PC at home (a newer Plextor 48x) I cannot access
the drive at all when DMA is enabled (even a simple 'mount' of an
ISO filesystem hangs) and the kernel log tells about a DMA
Joerg Schilling [EMAIL PROTECTED]MacArthur, Ian (UK) wrote:
Hi Jörg,
As this happens after 1 MB (= than the RAM size) it may be a
buffer underrun.
Check transfer speeds.
It however looks like the drives does not like the medium.
Call cdrecord -atip
Hmm, I'm not sure - I managed to
On Mon, Nov 17, 2003 at 10:50:46PM +0100, obarrot wrote:
Hi, I can't use my CD-ATAPI cdrom with xcdroast + the ide-scsi.o module
Judging from the version of cdrecord you used, I guess you are using
a really ancient version of xcdroast. (alpha9? current is alpha15)
One that does not support
Novenove Booking presenta :
Chew-Z
Dopo un anno di attesa e alcuni cambi si formazione parte il 15 gennaio 2004
il tour dei Chew-Z (componenti dei Ciaff, Narcolexia, Undertakers).
Bisca (Manca solo un attimo - CNI-RAI TRADE)
Bisca torna a proporci la sua musica e la sua visione del mondo. Dal
On 13 Nov, Joerg Schilling wrote:
From: Lourens Veen [EMAIL PROTECTED]
On Wed 12 November 2003 11:33, Helmut Jarausch wrote:
I can't remember the version, but I'm quite sure it was a 2.01a*
version.
I'll try to use the driver under Win2K first, to check if it's a
hardware problem.
Okay.
FUEL SAVER PRO
This revolutionary device Boosts Gas Mileage 27%+ by helping fuel burn better
using three patented processes from General Motors.
www.bb4n.org/?axel=49
PROVEN TECHNOLOGY
A certified U.S. Environmental Protection Agency (EPA) laboratory recently
completed tests on the new Fuel
Rob,
It's probably just a coincidence, but I thought I'd better
ask in case there were any known issues, as at present my
*cheap* DVD burner has turned in to an *expensive* CD reader...
Which is inconvenient, to say the least!
I have to say that this looks almost identical to the
On Mon 24 November 2003 13:20, Ole Jacob Taraldset wrote:
I'm trying to get my LG GSA-4040B attached to a RedHat 8 box burn
a iso doing dvdrecord -v dev=0,0,0 -dao -dummy
/iso/shrike-i386-disc1.iso, but nothing is written and I'm note
sure what the error is. The disk is a DVD-R.
dvdrecord is
Way too much spam is coming from the cdwrite mailing list. Can whoever
controls the list please put an end to it?
Thanks,
JP
Message-ID: [EMAIL PROTECTED]
From: Barney Benitez [EMAIL PROTECTED]
Reply-To: Barney Benitez [EMAIL PROTECTED]
To: cdwrite@other.debian.org
Subject: Boost Your Car's
* Ole Jacob Taraldset ([EMAIL PROTECTED]) wrote:
I'm trying to get my LG GSA-4040B attached to a RedHat 8 box burn a iso doing
dvdrecord -v dev=0,0,0 -dao -dummy /iso/shrike-i386-disc1.iso, but nothing
this is the cause...
pgpZMYmopmCT1.pgp
Description:
From [EMAIL PROTECTED] Fri Nov 21 22:03:53 2003
Why do you believe that the drive does not work at all with cdrecord?
I could use it with my tests...
Well, just read my threads in the list for details.
Well, I thought this was a growisofs specific thread and did not read it
I have
Hi,
short question:
Does cdrtools work on a linux 2.6.0 based machine ?
Thank you very much in advance for your help.
Kind regards,
M.Cramer
Why do you believe that the drive does not work at all with cdrecord?
I could use it with my tests...
Well, just read my threads in the list for details.
In short: when I had the NEC before, I used proDVD for recording
DVD+R without problems - but DVD-R did not work (find a lot of
details/logs
Hi,
I've a puzzling problem and hope someone's experience
can help me.
I have quite a recent Plextor 48/24/48 burner attached to my Linux
system (currently 2.4.23-rc2)
This drive has been running initially with my kernel which enables
DMA by default.
Now I cannot use the drive anymore under such
[List seems to be down!?
At least Debian-archive, and mail-archive did not get
updated since Friday..
]
I used windows to upgrade the firmware to 1.03. Once you go past 1.01
to 1.02 or 1.03 you can't flash it back to 1.01. You can flash back to
1.02 from 1.03.
I know that. Am still at
[List seems to be down!?
At least Debian-archive, and mail-archive did not get
updated since Friday..
]
It is a known fact that the firmware in the 708 is not what I would expect.
If you insert a medium that it doesnt like, then it behaves as if the drive
is broken. People who don't know
35 matches
Mail list logo