Hello,
I am looking to purchase an ISDN Simulator.
Perhaps one from someone's personal lab, etc.
Thanks, Dwayne
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [
Hello,
I am looking to purchase an ISDN Simulator.
Perhaps one from someone's personal lab, etc.
Thanks, Dwayne
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [
"Dwayne" wrote in message <99ufdt$10d$[EMAIL PROTECTED]>...
>Hello,
>
>I am looking to purchase an ISDN Simulator.
>Perhaps one from someone's personal lab, etc.
>
>Thanks, Dwayne
>
>
>_
>FAQ, list archive
Hello,
I am looking to purchase an ISDN Simulator.
Perhaps one from someone's personal lab, etc.
Thanks, Dwayne
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [
yone lend some suggestions?
Thanks, Dwayne
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4289&t=4289
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosur
Hello,
Anyone looking for a Token Ring switch?
Used only in my lab, great condition.
Please contact me directly.
Thanks!
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10587&t=10587
--
FAQ, list archives, and
Anyone in St. Louis, MO interested in
local rack time?
Please email me directly: [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12242&t=12242
--
FAQ, list archives, and subscription info: http://www.groupstudy
Anyone in St. Louis, MO interested in
local rack time?
Please email me directly: [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12243&t=12243
--
FAQ, list archives, and subscription info: http://www.groupstudy
Please correct me if I am wrong, but aren't the 2900 and 3500 layer 2 only?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Q
Wade Billings
Sent: Wednesday, September 27, 2000 1:40 PM
To: [EMAIL PROTECTED]
Subject: RE: Layer 3 switching
Any 6500 series
I use the NT. Works well. What is the reason you would want it on the
routers?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ariel
Sent: Thursday, October 05, 2000 9:35 AM
To: [EMAIL PROTECTED]
Subject: Re: which is better ?
I don't know about Cisc
CAn anyone help me with a small problem I face.
I am using a 2621 router 2900xl switch and a 2610 router.
the purpose of the exercise is to have the 2621 as the main router trunking
vlans from the switch using isl when I use the 2610 as a backup router and
configure hsrp all seems fine the hsrp wo
Does anyone know how to change the pcmcia card from read only to write able
D'Wayne Saunders
ccna.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Does any one know if you can connect and configure a 56kbp to a bri
interface of a cisco 1003 router.
Iknow you can do it through AUX port but can it be done through the BRI
interface
D'Wayne Saunders
CCNA
_
FAQ, list archives, and subscription info: http://www.gro
Hi all,
my situation is this we have 2 7120 one has 2 T1 links into it the
other is sitting there doing nothing. Router A (the one with 2 serial links
) has two default routes to utilize both T1's. then it is sent straight to a
firewall.
What I want to know is if I use both routers 1 T1 i
Does anyone know of cisco user groups in australia or has links to them
D'Wayne Saunders
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=111&t=111
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisc
Does anyone know of Cisco user groups or study groups in Australia or has
links to them
D'Wayne Saunders
D'Wayne Saunders
Senior MIS Operator
Ph:08 89507748
Fax:08 8952112
Mobile:
www.lasseters.com.au
World's First Government Licensed and Regulated Online Casino...
**
Can anyone point me to the links to be able to configure ssh ver2 on a 7120
router
and what ios do I need
D'Wayne Saunders
Senior MIS Operator, CCNA
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2570&t=2570
--
FAQ, list archiv
This is true but all documentation on the Cisco website relates to version
1, is version 2 supported
D'Wayne Saunders
Senior MIS Operator, CCNA
-Original Message-
From: Tim O'Brien [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 1 May 2001 0:27
To: Dwayne Saunders
Subject: Re: SS
For starters I would not use the supervisor module to trunk use one of your
fast Ethernet port on module Two for the trunk.
D'Wayne Saunders
Senior MIS Operator,CCNA
-Original Message-
From: [EMAIL PROTECTED] (Richard Chang)
[mailto:[EMAIL PROTECTED]]
Sent: Thursday, 3 May 2001 2:29
To:
Hi all,
Just wondering if you can help me I have a small problem with a ACL,
below you see that ip from 192.168.5.0 network is allowed to send to
anything and the next line
allows the 10 network to send to 5.65 on port 1433. My problem is that with
this in place I can get from the 5 networ
ailto:[EMAIL PROTECTED]]
Sent: Friday, 4 May 2001 0:54
To: Dwayne Saunders; [EMAIL PROTECTED]
Subject: RE: ACL problem [7:3039]
Can you provide some ascii art here? Is the ACL in or out? From where to
where? When you say you have another box with the exact same list and it
works, where is that b
please send more information
D'Wayne Saunders
Senior MIS Operator, CCNA
-Original Message-
From: Chan [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 9 May 2001 22:51
To: [EMAIL PROTECTED]
Subject: Re: CCNA, CCNP, Stuff [7:3356]
like to know more abt it as well as price
Muhammad Tariq w
Hi all was just wondering in the major differences between a cat 5500 and a
6006 as we have a cat 5500 at work and they have just acquired two cat 6006
which I get to play with for three months until they are scheduled to go
into production both have two supervisor modules and two rsms as well I h
you can use the set span command to monitor all fe ports
D'Wayne Saunders
Senior MIS Operator, CCNA
-Original Message-
From: Keith Woodworth [mailto:[EMAIL PROTECTED]]
Sent: Saturday, 12 May 2001 9:51
To: [EMAIL PROTECTED]
Subject: Switch port Mirror on a Cat5500 [7:4240]
Want to put
Hi all,
this might be a stupid question but when you use the debug ip udp on
a rsm blade of a catalyst 5500 what output would you expect to see. dns on
one side mail server on the other.
I am getting no output at all when I do a domain lookup from the mail server
to the dns is this correc
I am using a FE module out of a 2621 on a 2610 with no problems even though
Cisco config tools says you can't
D'Wayne Saunders
Senior MIS Operator
-Original Message-
From: mondo [mailto:[EMAIL PROTECTED]]
Sent: Saturday, 19 May 2001 15:45
To: [EMAIL PROTECTED]
Subject: Re: Can I use F
IP layer to see if it's a UDP packet and then display it on
> the console
> if it were.
>
> Try generating DNS queries from the router.
>
> And get a Sniffer! The router isn't a protocol analyzer. ;-)
>
> Priscilla
>
> At 06:47 AM 5/18/01, Dwayne Saunders wrote:
Just passed with a 814
alot of questions on multicast
D'Wayne Saunders
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6542&t=6542
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report mi
hi all,
Does anyone know where on the Cisco site the hardware compatibility
matrix is, what I want to be able to do is put in my router/switch model to
try and find all the different modules available aswell as being able to see
(for example what modules are compatible with 2600 and 3600 r
try 10.10.0.0/16 this 65025 but will the switch be able to handle this i.e..
memory and such
D'Wayne Saunders
Network Admin
Ph:08 89507748
Fax:08 89521112
Mobile:
www.lasseters.com.au
World's First Government Licensed and Regulated Online Casino...
**
Hi all,
was just wondering if our company starts to use bgp will I need to
run a igp as at the moment with our tight security everything is static
routed.
so the question is will I need to introduce a igp if we start to use BGP.
D'Wayne Saunders
Network Admin
Message Posted at:
http:/
rnal
connection, there is no need to run BGP. If you do decide to run BGP, static
routes or an IGP will work..
""Dwayne Saunders"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
> was just wondering if our company starts to use bgp wil
Try using a rollover cable instead of a straight through cable to the db9
D'Wayne Saunders
Network Admin
Ph:08 89507742
Fax:08 89521112
Mobile:
www.lasseters.com.au
World's First Government Licensed and Regulated Online Casino...
*
Common Management Information Protocol
Here is a link
http://www.geocities.com/SiliconValley/Horizon/4519/snmp3.html
-Original Message-
From: Phil Barker [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 01, 2002 5:42 AM
To: [EMAIL PROTECTED]
Subject: Re: Anyone know what udp port 1
IT training has been going on in prisons for some time. Networking has been
taught, but this is the first I have heard of Cisco being involved.
-Original Message-
From: Patrick Donlon [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 01, 2002 11:00 AM
To: [EMAIL PROTECTED]
Subject: Re: MA
There is a reasonableness component built into HIPAA. There was some rumors
about frame relay, amongst other things. Here is a link:
http://aspe.os.dhhs.gov/admnsimp/nprm/sec09.htm
Would frame relay be considered open? It sounds like encryption would be
optional.
-Original Message-
This doesn't work when you copy run to start it overwrites the start-up
config but when you copy from start to running the start-up config merges
with the running config. this was part of my studying for my ccna
D'Wayne Saunders
Network Admin
Ph:08 89507742
Fax:08 89521112
Mobile:
www.lass
I would agree. It all depends on your network and what you are trying to
achieve with the Acl's.
D'Wayne Saunders
Network Admin
Ph:08 89507742
Fax:08 89521112
Mobile:
www.lasseters.com.au
World's First Government Licensed and Regulated Online Casino...
**
Yes it will I am using a 2610 to route between 4 vlans and a 2621 to route
between 15 different vlans in our test environment
D'Wayne Saunders
Network Admin
-Original Message-
From: Circusnuts [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 21, 2001 11:54
To: [EMAIL PROTECTED]
Subject
has the passing score for the ccna changed
when I sat it in December last year the pass mark was 822
just wondering
D'Wayne Saunders
Network Admin
Ph:08 89507742
Fax:08 89521112
Mobile:
www.lasseters.com.au
World's First Government Licensed and Regulated Online Casino...
**
Very strange I have a fast Ethernet module in a 2610 and it works and I am
only using the ip feature set
so I don't know what the story is there
D'Wayne Saunders
Network Admin
Ph:08 89507742
Fax:08 89521112
Mobile:
www.lasseters.com.au
World's First Government Licensed and Regulated Onli
all to the fast ethernet module
D'Wayne Saunders
Network Admin
-Original Message-
From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 22, 2001 00:13
To: 'Dwayne Saunders'; [EMAIL PROTECTED]
Subject: RE: What Router for Routing Between VLANS [7:1
Hi all,
is any one able to direct me in the right direction or be able to
explain what the (DNA) is in the sh ip ospf database
Router Link States (Area 0)
Link ID ADV Router Age Seq# Checksum Link count
172.16.11.100 172.16.11.100 1970
thank you
D'Wayne Saunders
Network Admin
-Original Message-
From: Tony Medeiros [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 31, 2001 11:39
To: Dwayne Saunders; [EMAIL PROTECTED]
Subject: Re: ospf [7:18002]
DNA (Do Not Age)
Got an OSPF demand circut configured somewhe
Hello,
I am looking for a complete lab that someone has used to complete
the Cisco R/S CCIE Lab?
Please send info to [EMAIL PROTECTED]
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi Keith,
I have just sat the safe exam and failed I went in after reading the safe
documents as well I have my CSS1
this exam seems fairly easy but I still failed After the exam I went home
and re read the safe documents and I personally can't see from the questions
asked how I failed but
network seems to be working and I am still wondering why with the way
the 10.10.x.x networks are arranged
Any comments would be greatly appreciated.
Dwayne
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6&t=6
--
F
6.3 no go.
Dwayne Saunders
CCNP CCS1
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Charles Riley
Sent: Saturday, 31 May 2003 13:23
To: [EMAIL PROTECTED]
Subject: Re: Loosing router config (OT rants) [7:69850]
I feel your pain! I am sitting here lo
I have DSL site to site links, and qcheck works well.
http://www.netiq.com/qcheck/complementarytools.asp
-Original Message-
From: Larry Ogunbanjo [mailto:[EMAIL PROTECTED]]
Sent: Thursday, April 25, 2002 10:56 AM
To: [EMAIL PROTECTED]
Subject: DSL traffic monitoring [7:42551]
Group
Hi all,
I was just wondering on what sort of accounting and billing systems
people use. I have been given the task of finding a product that will be
able to do billing for hotel rooms and a convention centre.
any help would be greatly appreciated
Regards
D'Wayne Saunders
Network Administ
Hi all
Was Just wondering after completing your Cisco Qualified specialist
exam what does Cisco send out if anything
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=47263&t=47263
--
FAQ, list archives, and subscription i
use the command term length 0 this will fix you problem
D'Wayne Saunders
Network Admin
Ph:08 89507742
Fax:08 89521112
Mobile:
www.lasseters.com.au
World's First Government Licensed and Regulated Online Casino...
***
Hi all was just wondering wether or not the Cisco 3102 would be worth having
for a home lab I know that they are eol was just wondering if anyone had a
opinion on this product the will be used for my CCNP.
D'Wayne Saunders
Network Admin
Message Posted at:
http://www.groupstudy.com/form/read.p
I think it was. I am using smtp fixup with an nt email server behind a pix.
-Original Message-
From: Patrick Ramsey [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 11, 2001 4:54 PM
To: [EMAIL PROTECTED]
Subject: Re: mail servers behind the pix [7:19381]
Wasn't this fixed with the ne
Hi all was just wondering if any one has sat 2 ccnp exams in the single day
as I have BCRAN and CIT at the end of month
Was just wondering if anyone has would they care to pass on some of the
strategies the used
D'Wayne Saunders
Network Admin
Ph:08 89507742
Fax:08 89521112
Mobile:
www.lass
Congrats George
D'Wayne Saunders
Network Admin
Ph:08 89507742
Fax:08 89521112
Mobile:
www.lasseters.com.au
World's First Government Licensed and Regulated Online Casino...
*
If you create a local username and the configure the line or console port to
login local you router will log the user name as well
1w1d: %SYS-5-CONFIG_I: Configured from console by dwaynes on vty0
(192.168.x.x)
D'Wayne Saunders
-Original Message-
From: Shahram Esfahani [mailto:[EMAIL
Thanks to all for all the help
I passed BCRAN and CIT on Saturday
D'Wayne Saunders
Network Admin
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21521&t=21521
--
FAQ, list archives, and subscription info: http://www.groupstudy.
I have done this when a contractor had set up our border router with the
wrong subnet mask you can change with zero down time as long as all hosts
are configured correctly
D'Wayne Saunders
Network Admin
CCNP
-Original Message-
From: sam sneed [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, Oct
Hi all can any one tell me why from my config that i can get the first 2 b
channels up but the second 2 try to dial and the dissconnect I think I am
missing something very simple.
00:02:26: ISDN BRI0/1: isdn_is_bchannel_available: No Free B-channels
00:02:26: ISDN BR0/0: Outgoing call id = 0x8005
if that was the problem.
JMcL
Dwayne Saunders wrote:
>
> Hi all can any one tell me why from my config that i can get
> the first 2 b
> channels up but the second 2 try to dial and the dissconnect I
> think I am
> missing something very simple.
>
> 00:02:26: ISDN BRI0/1:
> Hi all,
> I am looking for a new bootstrap image for a 2600 as mine currently
> is running 11.3 I would like to upgrade this to 12.1 to match my ios
> My problem is after searching and searching on CCO I am unable to find an
> image now am I going crazy or is there no image to find.
>
> T
This won't work because the source packet doe's not have a source port of 23
what you need to do is
access-list 101 permit tcp any gt 1023 any eq telnet (this is for inbound )
from memory traffic originating from router will not be bound by an ACL so
your out bound traffic should be alright (not 1
Hi all Mac users
I have a small problem with a network that I was asked to look at
there is 6 end user machines and 1 server all connected via a switch the
problem is that when connected to the switch network transfers to and from
the server are very slow i.e. 100meg file take approx 18 min
I have just found that it is good practice to not allow the source port if
below 1024
Regards
D'Wayne Saunders
Data Network Administrator
-Original Message-
From: Aaron Laws [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 12 December 2002 8:35 AM
To: [EMAIL PROTECTED]
Subject: RE: extended
he switch ports are set to Auto Neg. ON. Try
> port setting to 100
> Half for G4s and 10 half for G3s and see what happens.
>
> Sayeed
>
> ""Dwayne Saunders"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi all Mac users
freebsd's dummynet
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Vajira Wijesinghe
Sent: Tuesday, 31 December 2002 17:26
To: [EMAIL PROTECTED]
Subject: Software WAN simulators [7:60007]
Hi Group,
Does anyone know about a SOFTWARE WAN simulator which ca
Hi all,
Was just wondering if any one could put me on to a good link in
regards NAT and packet headers, simply what I am trying to find out is the
packet header total rewritten or just the ip address part of the header and
checksum, Or is a new header written to envelope the original header
Hi all,
Let me start with I am about to start my design track. Every one
comments on Priscilla's Book Top Down Network Design I was just looking at
it and was wondering since this was written dec 1998 is it still current to
today's network topology's (Not trying to flame you Priscilla).
A
Hi all,
I know the doco cd has been mentioned before but is there anywhere
on the net that the latest ones can be downloaded
TIA
Regards
D'Wayne Saunders
Data Network Administrator
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54527&t=54527
---
. This is used as the outbound interface
to send the DHCP server response to the host that originally requested
the service. The router also automatically installs a host route for
this address.
http://www.cisco.com/warp/customer/794/routed_bridged_encap.html
HTH
Dwayne
-Original Message
72 matches
Mail list logo