Any CCIE study groups in the Jersey City area?
-Max
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62807&t=62807
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisc
I don't believe I'm meant to be able to accept incoming VPN requests and
connect to my employer's VPN. Specifically the problem is VPN requests are
serviced on the way in and at the same time I can successfully connect to my
employer's VPN but I can't decrypt the packets coming back from my employe
Is that the correct link:
can't find www.vfw.gov: Non-existent domainfred barreras wrote:
>
> Go to www.vfw.gov and you will find info on G.I. Bill benefits.
> Iy also contains 800 number and email address where you can ask
> them directly. They get back to you pretty fast. Good Luck.
Messag
What about a tool that can determine the speed and duplex settings on
multiple switch ports. CW2000 probably already does this but what about a
tiny script...Maybe someone could post a link???
=)
>Larry Letterman wrote:
>
> we have a tool like that. One of our script experts writes
> stuff like
Has anyone been able to successfully upgrade his or her systems hardware
from a P3 Xeon Proc and Mobo to a P4 processor and motherboard without
having to reinstall Microsoft 2000?
I'm anticipating the B.S.O.D but I was curious...
The processor, motherboard, memory, and power supply will be replac
Maximus wrote:
oops i meant gre.
replace esp with gre; should read:
access-list 124 permit gre host (insert external vpn nic IP
address) host 216.100.100.130
>
> try:
>
> access-list 124 permit gre host (insert external vpn nic IP
> address) host
> 216.100.100.130
>
You can try: sh diag
This will give you several serials!
BTW I am a new comer so please no flame.
Galo
- Original Message -
From: "Dion, Thierry"
To:
Sent: Friday, May 03, 2002 11:00 AM
Subject: RE: Serial number [7:43211]
> Nop
>you cannot get chassis serial number on C7000 ser
I may be wrong but your friend is using a routing protocol and therefore the
below would not apply to the scenario.
As for running SOP on the server IMHO it would be overkill for this specific
situation. "Keep it simple."
Would I run SOP on a server?
Depends on why I had the server built in the f
Sorry list members, the spell-checker changed OSPF to SOP.
- Original Message -
From: "Maximus"
To:
Sent: Friday, May 10, 2002 12:40 PM
Subject: Re: dual-homed hosts problems [7:43677]
> I may be wrong but your friend is using a routing protocol and therefore
the
>
Yes you are correct. I've been receiving little if any messages in
comparison to the past.
Also this AM the site was not even coming up.
- Original Message -
From: "s vermill"
To:
Sent: Thursday, May 16, 2002 3:18 PM
Subject: RE: Groupstudy Problem?!?! [7:44312]
> I've had difficulty
I've decided to take the plunge.
1.Has anyone ever successfully installed Snort on a 2000 box?
2.I downloaded Snort 1.8.6 and WinPcap. Dunno why I pulled down Winpcap,
but I did.
3.Either way I'm just a newbie to Snort(IDS) and can't find a down and
dirty guide to get started...
A
Worked for me on 12.2(12a):
clear ip access-list counters
- Original Message -
From: "John Tafasi"
To:
Sent: Tuesday, November 12, 2002 5:22 PM
Subject: Re: Clearing access lists counters [7:57241]
> I tried this also and it did not work. He is what I did:
>
>
> R5-2503#clear ip acces
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57611&t=57611
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
what CatOS are you running?
set spantree macreduction {enable | disable}
To:
Sent: Thursday, December 05, 2002 12:17 AM
Subject: how to set extended range vlans (vlan number >1024) on [7:58600]
> the following is configuration of my cat6509:
>
> --- --- ---
I believe you can create extended vlans in either Server/Transparent modes.
You just cannot use VTP to manage these VLANs; they must be statically
configured on each switch.
watch the wrap
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_3/confg_gd/vlans.htm#xtocid9
Message Po
2924Switch>sh int fa0/6 switchport
Name: Fa0/6
Switchport: Enabled
Administrative mode: static access
Operational Mode: static access
Administrative Trunking Encapsulation: isl
Operational Trunking Encapsulation: isl
Negotiation of Trunking: Disabled
Access Mode VLAN: 10 (VLAN0010)
Trunking Native
try IOS Version 12.2(11)T3
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61260&t=61256
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAI
I thought I was the only one not able to traverse multiple domains through
the VPN. This is interms of client/server applications.
=)
- Original Message -
From: "Rod Rodericks"
To:
Sent: Wednesday, July 10, 2002 3:47 PM
Subject: Re: Unable to access MS Outlook using IPSec Lan-to-Lan [
No.
--- - -- --
---
12 Cat 6k sup 1 Enhanced QoS (Standby)WS-X6K-SUP1A-2GE
22 Cat 6k sup 1 Enhanced QoS (Active) WS-X6K-SUP1A-2GE
4 16 16 port 1000mb GBIC ethernet WS-X6416-GBIC
9 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
Comments?
-Maxi
primary is active. This means no console nor any other sort of access is
available. It just remains say INACTIVE while the primary is online.
- Original Message -
From: Turpin, Mark
To: 'Maximus'
Sent: Monday, August 19, 2002 3:17 PM
Subject: RE: Multiple Supervisors 6509 Chassis;
> Cisco Systems
> [EMAIL PROTECTED]
>
>
>
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Maximus
> Sent: Monday, August 19, 2002 11:49 AM
> To: [EMAIL PROTECTED]
> Subject: Multiple Supervisors 6509 Chassis; Native IO
ask some guys
> on my team and find out...an dpost the reply.
>
>
> Larry Letterman
> Cisco Systems
> [EMAIL PROTECTED]
>
>
>
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Monday, August 19, 2002 6:34 PM
> To:
Did you catch the following comments compliments of Priscilla:
~watch the wrap~
http://www.groupstudy.com/form/read.php?f=7&i=72415&t=72380
PacketEXPERTS wrote:
>
> I am looking to test next month (CCDA 640-861).
>
> I am looking for any and all books, tips and info to help test
> next month.
ord. Can you post Priscilla's thoughts on this new
> exam.
>
> Thank you.
>
> Sincerely,
>
> >From: "Maximus " >Reply-To: "Maximus " >To:
> [EMAIL PROTECTED]
> >Subject: RE: 640-861 CCDA [7:72217] >Date: Sun, 20 Jul 2003
> 01:42:41 GMT
>
Per these instructions, I am able to bring my frame connection online:
http://www.cisco.com/warp/public/125/frbacktoback.html
However when I intentionally break the connection (Pull the Cable)
the PVC doesn't automatically come back up. Is it because its static to
begin with? I know I'm probabl
SOCOM BROTHER!!!
{-)
- Original Message -
From: "Tom Martin"
To:
Sent: Thursday, July 24, 2003 11:48 AM
Subject: Re: Cisco menu logins [7:72931]
> But I should keep the "All your base are belong to us" line in there??? :)
>
> It's a lab router!
>
> - Tom
>
> Reimer, Fred wrote:
>
> >I
I believe the standard ACL should be enough since your already specifying
transport input ssh on line vty 0 4.
Just my $0.02
Jablonski, Michael wrote:
>
> I'm having a bit of trouble with extended access-lists for vty
> access.
> Basically I'd like to setup an extended access list that only
> al
even after being unplugged
and reconnected.
Degracia, Alex wrote:
>
> Make sure lmi is being exchanged.
>
> Turn on keepalives for the pvc.
>
>
>
> -Original Message-
> From: Maximus [mailto:[EMAIL PROTECTED]
> Sent: Thursday, July 24, 2003 11:13 AM
>
Hi all,
Need assistance in getting the above working. I have a 2651 with 2 x 10/100
interfaces and am trying to get 802.1Q VLAN trunking to work on 1 of the
interfaces.
Figured that I need IOS 12.1(7) with IP Plus features. Tried running IOS
from TFTP as I don't have enough flash at the moment
ok; online
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57618&t=57611
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
30 matches
Mail list logo
