in which case
Router DD will also say "Right on dudette! If I
want to get to network 99.99 I will send it to
3.1."
Correct me if I have missed any points. Don't go soft, as I am really
trying to wrap my beer cells around this thing!
Thanks ahead of time, and looking for
Well,
Threw out that BGP4 confussion I had, and thought I would pass on some
info:
Fairly new GSR bug {August 3rd}.
http://www.securityfocus.com/frames/?content=/vdb/bottom.html%3Fvid%3D1541
And for general Cisco IOS bugs:
http://mail.altavista.com/jump/http://www.securityfocus.com/frames/?c
For what it's worth, posting a second time...
{Posting thru nntp, if that matters?}
BSCN review
Test : BSCN 1.0
# of Questions: 61
Score : 850
Passing score : 690
Preperation : A bunch!
Exam Prep
Specifically, I took the BSCN 1.0 class thr
Right off the bat, I would say change one of the areas to Area 51 and
be done with it. ;-) It is typically not hard to change the area.
_ESPECIALLY_ with the fact it is already attached to the Backbone!
My understanding, and a quick search at my 2nd favorite search engine,
only showed virtual-l
Jennifer,
I don't have the answer, but just some thoughts.
1. Offtopic--just a little bit: You can get about 1x10mb atm pipe for
what 4 T1s cost you {typically & of course depending on where you
are}. You may want to check on that. Also, why {even from a mgt.
standpoint} would you want to use
Nat,
This is one of those things that differientiate [sp?] a _LOGICAL_
drawing and a _PHYSICAL_ drawing.Figure 9-3 on that page shows
"Network 3.0.0.0" and "Network 2.0.0.0" This is a logical drawing.
These networks could be utilizing a HUB, Switch, or a direct connect
such as a cross-over c
Real quick...not seeing the whole config...
"ip classless"
TroyC
On 11 Jun 2000 22:55:21 -0400, [EMAIL PROTECTED] ("Rodgers Moore")
wrote:
>Hi all,
>
>An update. I made a mistake on the configs. The mistake can easily be
>found in a book. Since no one has found it, I won't spoil the fun and
7 matches
Mail list logo
