Justin Shore wrote:
I've been in situations where I had to download an IOS image with the el
cheapo browser in my data phone that does not have Java support, save it
to the MicroSD card and then use a card reader to transfer that to my
laptop so I could fix a critical network issue. Java
This might be a silly question but is there a tool somewhere that will
give me a list of IP's that are owned by a particular AS.
As an example, I might want to know which IP blocks belong to AS1234?
Thanks.
Andy
This email and any files transmitted with it are confidential and intended
On Thu, Sep 24, 2009 at 11:55 PM, Andy Saykao
andy.say...@staff.netspace.net.au wrote:
This might be a silly question but is there a tool somewhere that will
give me a list of IP's that are owned by a particular AS.
As an example, I might want to know which IP blocks belong to AS1234?
* Andy Saykao:
This might be a silly question but is there a tool somewhere that will
give me a list of IP's that are owned by a particular AS.
As an example, I might want to know which IP blocks belong to AS1234?
Run this:
show ip bgp regexp _1234$
on a router in the DFZ. (I get a
Thanks for the reply guys.
What I'm trying to achieve is to monitor the bandwidth utilization on
our Internet link. So for example we want to know how much bandwidth is
being utilized by our customers so we can say ah huh out of our 100M
internet link, 90M of traffic is from youtube.com, so let's
Hi,
On Fri, Sep 25, 2009 at 04:55:48PM +1000, Andy Saykao wrote:
This might be a silly question but is there a tool somewhere that will
give me a list of IP's that are owned by a particular AS.
As an example, I might want to know which IP blocks belong to AS1234?
What exactly do you mean
Andy Saykao wrote:
This might be a silly question but is there a tool somewhere that will
give me a list of IP's that are owned by a particular AS.
As an example, I might want to know which IP blocks belong to AS1234?
The RIPE IRR does this for europe at least, and I believe RIPE and ARIN
On Fri, Sep 25, 2009 at 12:29:17AM -0700, Hector Herrera wrote:
On Thu, Sep 24, 2009 at 11:55 PM, Andy Saykao
andy.say...@staff.netspace.net.au wrote:
This might be a silly question but is there a tool somewhere that will
give me a list of IP's that are owned by a particular AS.
As an
http://webtrace.info/asn?q=1234submit=asn
2009/9/25 Ronan Mullally ro...@iol.ie
Hi Andy,
On Fri, 25 Sep 2009, Andy Saykao wrote:
This is why I needed to know what IP blocks belong to AS1234, so I could
find out how much traffic was actually coming from AS1234 on our
Internet link.
What is the added benefit of running an EoMPLS pseudowire across an
MPLS cloud over an L2TPv3 tunnel over the same cloud?
Michael
--
Michael Robson | Tel: +44 (0) 161 275 6113
Networks| Fax: +44 (0) 161 275 6120
Net North West | Email: michael.rob...@manchester.ac.uk
On Fri Sep 25, 2009 at 10:44:14AM +0100, Michael Robson wrote:
What is the added benefit of running an EoMPLS pseudowire across an
MPLS cloud over an L2TPv3 tunnel over the same cloud?
In my experience, a difference in which feature is supported on the hardware
you've got. My gut feel is that
Hi Andy,
On Fri, 25 Sep 2009, Andy Saykao wrote:
This is why I needed to know what IP blocks belong to AS1234, so I could
find out how much traffic was actually coming from AS1234 on our
Internet link.
Some (possibly all?) Whois servers can provide you with this information
with:
whois -h
Hi Andy,
Does your device support netflow? That is the best answer for this sort of
question.
If it does not, can you mirror the traffic to say a server and run ntop on that?
Ian
-Original Message-
From: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On
On Fri, Sep 25, 2009 at 06:12:22PM +1000, Andy Saykao wrote:
Thanks for the reply guys.
What I'm trying to achieve is to monitor the bandwidth utilization on
our Internet link. So for example we want to know how much bandwidth is
being utilized by our customers so we can say ah huh out of
On 25 Sep 2009, at 09:12, Andy Saykao wrote:
What I'm trying to achieve is to monitor the bandwidth utilization
on our Internet link. So for example we want to know how much
bandwidth is being utilized by our customers so we can say ah huh
out of our 100M internet link, 90M of traffic is
Wow, this is actually a tricky question, so I'll jot down some points
for you to think about from the top of my head (and anybody, please feel
free to correct these if they are wrong, they may be out of date)
EoMPLS:
- Requires end-to-end MPLS LSP
- Does not support path fragmentation (need
IF you need features in the 8.x code: Use 8.04(32) in the interim releases, if
you are authenticating against a windows domain there are some key fixes in
there.
Love this tidbit of info in the 8.2.1 release notes:
The caveats listed in Table 5 are recently-found caveats that were fixed in
Antonio Soares wrote:
Stay away from 8.2. We are experiencing crashes since July (TAC case involved).
Tomorrow we will install 8.2.1-10 to see if finally
we get rid of this.
I've had good luck with 8.2.1-3 for our purposes. Any 8.2 prior to that
has that nasty coredump feature that writes
Obviously everybody's experience has been different but I have been running
very nicely on 8.0.x code. I am running on the latest interim code on both
ASAs and PIXs due to a security flaw though.(knock on wood) It has been
very stable. 7.2.4 code was very buggy for me. I was upgrading
Nick,
I agree with you on the earlier 7.2(4) releases, in particular 7.2(4)18 was
bombing on us in multiple locations with site to site tunnels. However, I
think the same interim released bugs were in both trains. In terms of bug
fixes and general release times, 8.0(4)32 and 7.2(4)33 were
I have the following two ports on different modules and they have
different QOS scheduling which stops them from being members of a
channel group.
Is there a way to fix this by changing the QOS on one of the
ports ? I wanted to keep the ports on separate boards if possible.
I have been told that going forward TAC is the only way to get interim
releases on 8.2 and newer code. This wouldn't be bad if they put out
real releases more than once per year. Crazy that it seems to be SOP
that Cisco, through making it difficult to get patches, encourages
running code on a
try no mls qos channel-consistency under the port channel...
On Fri, 2009-09-25 at 10:33 -0400, Jeff Fitzwater wrote:
I have the following two ports on different modules and they have
different QOS scheduling which stops them from being members of a
channel group.
Is there a way to fix
Two words, Arbor Networks.
http://www.arbornetworks.com
I've used their collector / reporting appliances in a large ISP setting and
they were very good. Expensive but if you need detailed reporting and
traffic flow analysis these guys make some good tools. Export netflow to
the collector
That command is not available on 12.2SXI but I see that I could just
disable QOS per PORT.
Also I noticed this command which applies to mod 7 (supervisor) which
modifies the scheduling, but it looks like I would have to disable it
on the 7/4 port so it reverts back and matches the 12/6
Hi all,
I thought I would post my response that I received from a feedback message I
sent after not being able to use the new download tool. I'm encouraged by
this response and will be sending Cisco detailed information on screen
reader java interactions. For the general concerns it looks
nm...@guesswho.com wrote:
Justin,
I believe I saw your posts on the RANCID list and although the 8.2 coredump problem can be a pain you can modify your rancid script to ignore the coredump file when rancid does a show flash. I do this for dhcp snooping since the db is small enough that I can
Justin,
I definitely see your point but it might be hard to generalize that all CF
chips fail at 1 writes. Unless you know that Cisco uses a specific type of
flash and the MTBF of that chip is 1 writes. Some CF chips are rated much
higher than that.
Regardless it is good that Cisco
Hi,
I have two ASA 5520 devices in a active standby pair. I'm presently at
firmware 7.0.7 and ASDM 5.0 and want to upgrade to 7.2.4-33. I've googled
and found some detailed instructions and the process seems simple and
standard, upload the image, change the boot vars, save and restart.
Hi List.
Is Cisco able to include Ethernet preamble and FCS within the mpls
packet, on EoMPLS? Is it configurable?
AFAIK, these fields are removed, by default, before encapsulating...
Thanks in advance.
Ruter
___
cisco-nsp mailing list
I was about to write a little perl to further address the recent outcry
over the cisco.com Java misfeatures when lo, I discovered
ftp://download-sj.cisco.com will accept my cco login id/pass. I poked
around and discovered /cisco/ios and /cisco/ciscosecure/pix seemed to have
what I'd be looking
Scott,
I'm sure other people follow different methods, but I haven't run into any
issues loading the code on both devices, rebooting the primary causing an
immediate failover, waiting for the config sync messages on the new primary.
Once I see all interfaces as normal, I reload the primary
David Freedman-
Do you have a preference of one over the other? I've been thinking
about the option of replacing our L2TPv3 deployment with EoMPLS (ie,
Cisco's ATOM model).
We are using Cisco 7203 with NSE engine for L2TPv3 acceleration; but I'm
not a big fan of this platform; we have
Hi,
On Fri, Sep 25, 2009 at 11:49:47AM -0500, Ge Moua wrote:
We are using Cisco 7203 with NSE engine for L2TPv3 acceleration; but I'm
not a big fan of this platform; we have 3bxl-sup720/cat6k at the core
that can do MPLS in hardware; I was just thinking of using GRE to
encapsulate the MPLS
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I think the choice is simple.
If you have a native MPLS backbone, use EoMPLS.
If you don't, then don't, use L2TPv3, please don't do MPLSoGRE,
it is more trouble than it is worth.
That said, can you not build out a native MPLS network? does your
On 25/09/2009 17:36, Jason Gurtz wrote:
I was about to write a little perl to further address the recent outcry
over the cisco.com Java misfeatures when lo, I discovered
ftp://download-sj.cisco.com will accept my cco login id/pass. I poked
around and discovered /cisco/ios and
I would recommend forcing the failover from the CLI.
tv
- Original Message -
From: Ryan West rw...@zyedge.com
To: Scott Granados gsgrana...@comcast.net; cisco-nsp@puck.nether.net
Sent: Friday, September 25, 2009 11:48 AM
Subject: Re: [c-nsp] Any gotchas in upgrading ASA5520 pairs?
On Fri, Sep 25, 2009 at 9:36 AM, Jason Gurtz jasongu...@npumail.com wrote:
I was about to write a little perl to further address the recent outcry
over the cisco.com Java misfeatures when lo, I discovered
ftp://download-sj.cisco.com will accept my cco login id/pass. I poked
around and
Scott,
Not sure if is a concern for you but upgrading from 7.0 to 7.2 does not allow a
zero downtime upgrade. Check out the section Performing Zero Downtime
Upgrades for Failover Pairs on the following link:
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/mswlicfg.html
Anyone else try doing this? I'm on 12.2(33)SRC4 on a 7200 w/NPE-G2 and for
some reason the vrf option in ip route static bfd is not showing up... I
don't see anything in the release notes about this or in bug toolkit...
Anyone thoughts?
___
cisco-nsp
Gert-
what about the 3cxl; we have some of those on hand too.
Regards,
Ge Moua | Email: moua0...@umn.edu
Network Design Engineer
University of Minnesota | Networking Telecommunications Services
Gert Doering wrote:
Hi,
On Fri, Sep 25, 2009 at 11:49:47AM -0500, Ge Moua wrote:
We are
Andy Saykao wrote:
This is why I needed to know what IP blocks belong to AS1234, so I could
find out how much traffic was actually coming from AS1234 on our
Internet link.
What you actually want is Netflow (or JFlow, sFlow, etc) with a suitably
smart collector, which will provide you with all
On Fri, Sep 25, 2009 at 01:33:09PM -0300, Ruter Guike wrote:
Hi List.
Is Cisco able to include Ethernet preamble and FCS within the mpls
packet, on EoMPLS? Is it configurable?
AFAIK, these fields are removed, by default, before encapsulating...
RFC4448 (Encapsulation Methods for
You won't find crypto images there, but it has lots of other stuff, and
is massively easier to negotiate than the web site.
Ahh yes, thanks for the clarification, that would explain the missing k9
Suckage...back to the perl idea...
~JasonG
smime.p7s
Description: S/MIME cryptographic
Hi, thanks for the link. So it looks like I was close. Am I reading this
right in that I have to upgrade from 7.0 to 7.1 first then to 7.2?
Thanks
Scott
- Original Message -
From: nm...@guesswho.com
To: gsgrana...@comcast.net; cisco-nsp@puck.nether.net
Sent: Friday, September 25,
Yes that is the recommended procedure.
You can upgrade from the last minor release of the previous version to the
next major release.
For example, you can upgrade from 7.9 to 8.0, assuming that 7.9 is the last
minor version in the 7.x release.
Nick
-Original Message-
From: Scott
Oops wrong quote.
This is the one I intended to send you since you are not going to 8.x code.
For example, you can upgrade from 7.0 to 7.1. Upgrading from 7.0 directly to
7.2 is not supported for zero-downtime upgrades; you must first upgrade to 7.1.
-Original Message-
From: Nicholas
Hi,
I thought I would post my response that I received from a feedback
message I sent after not being able to use the new download tool. I'm
encouraged by this response and will be sending Cisco detailed
information on screen reader java interactions. For the general concerns
it looks
On Fri, 25 Sep 2009, Alan Buxey wrote:
[snip]
no path = no file issue too. which isnt amusing after you think you've
just downloaded 5 IOS releases to undertake some work.
anyway, yes. non java option looks like its coming...
For the impatient, I found this:
On Fri, 2009-09-25 at 12:36 -0500, Ge Moua wrote:
Gert Doering wrote:
PFC3b cannot do MPLS-over-GRE
what about the 3cxl; we have some of those on hand too.
Same thing, no MPLSoGRE. In almost all practical regards the PFC3C and
PFC3B are the same.
--
Peter
Hi,
On Fri, Sep 25, 2009 at 12:36:37PM -0500, Ge Moua wrote:
Gert-
what about the 3cxl; we have some of those on hand too.
Same. Difference between 3b and 3c is mainly MAC address table space,
and xl vs. non-xl is table size for routing table entries (TCAM space),
but it's the same EARL.
You asked, now it's here. You can leverage the download cart to queue up your
downloads and get a page with all the URLs. The main difference is now you
have to accept the EULA, whereas with the bookmark or Stig's greasemonkey
script, you did not.
-ryan
52 matches
Mail list logo