Hi
Planning to replace the rod rigging on a 37+ this off season.
Anyone been down this road, tips and any estimates on total cost? Initial
estimates I have received are around 12-15k
Thanks
Rob
Sent from my iPhone
Please show your appreciation for this list and the Photo Album site and help
Hi
Anyone replaced their outhaul? Boat is a C&C 37+, with rope to wire that
attaches to the main.
Looking at the manual it’s says 3/8 30ft, but nothing about wire.
Thanks
Rob
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a cont
ntage.
On Wed, Aug 2, 2023, 5:31 AM Rob Hamlin via CnC-List <cnc-list@cnc-list.com> wrote:
Thanks Josh glad I’m waiting till off season, recall any part number from Edson..sounds like some fabrication in or
out and let me
> know. There are some tricks. I had mine completely sand blasted and
> repainted. All the internals were completely rebuilt.
>
> Josh Muckley
> S/V Sea Hawk
> 1989 C&C 37+
> Solomons, MD
>
>
> Aug 1, 2023 15:55:33 Rob Hamlin via CnC-List :
>
Thinking about my my off season punch list.
Steering system is next up, after motor mounts and running gear last year.
Any idea on cable and idlers required?
Thanks
Rob
Sent from my iPhone
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bi
Check your filters as well, especially the one on the motor. If crud is in
there and moving around it will restrict fuel flow when the boat heals
Sent from my iPhone
> On Jun 9, 2023, at 10:40 AM, Barry McKee via CnC-List
> wrote:
>
> If this is the first time, there is a possibility there
The bolts came finally came out with pressure and power impact. It doesn’t
appear to be wood under the fiberglass.
My plan is try to drill out see if I can re-tap or May look to cut out and back
the stringer and glass afterwards.
Sent from my iPhone
> On Mar 10, 2023, at 9:25 AM, Della Barb
teel plate. Maybe you could wap
> it with a new steel plate and through drill it from the sides to secure it.
> Otherwise grinder and lots of new
> fiberglass.
>
> Cheers,
> Jeff Nelson
> Muir Caileag
> C&C 30 - 549
> Armdale Y.C.
>
>> On 2023-03-1
Hi
I’m replacing the motor mounts C&C 37+, Yanmar 3HM35F motor.
Removed the two back mounts, looks like they are held in by machine bolts into
bed. The front two bolts holding each mount were stripped.
Question, anyone else came across this? thoughts on solution to re-fasten/bed
the bolts.
-
&C 43
> Port Ludlow/Seattle
>
>> On Feb 9, 2023, at 5:53 AM, Rob Hamlin via CnC-List
>> wrote:
>>
>> Hi
>> Can anyone confirm the size of the shaft tube 37+? I know the shaft is 1
>> 1/8 . Looking to replace this year.
>>
>> -Rob
&g
Hi
Can anyone confirm the size of the shaft tube 37+? I know the shaft is 1 1/8 .
Looking to replace this year.
-Rob
Sent from my iPhone
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/st
I have the honor of owning at C&C 37+ a wonderful design that does a lot well.
We are lucky that his talents will live on.
Condolences to his family and friends.
Rob Hamlin
Vice Commodore
East Greenwich Yacht Club
> On Sep 10, 2022, at 7:19 AM, David Knecht via CnC-List
> wrote:
>
> Sad n
Check your connections, make sure terminal are tight. Also any corrosion on terminals, battery or starter. Do you hear a click when trying to start? Sent from my iPhoneOn Jul 7, 2022, at 9:28 AM, Chris Riedinger via CnC-List wrote:Sounds like the start button or perhaps neutral safety -did you
Congratulations Andy! Fantastic
Sent from my iPhone
> On Jun 22, 2022, at 11:46 AM, Andrew Burton via CnC-List
> wrote:
>
> Thanks, Joel! I learned all I know sailing my Dads C&C 27.
> Andy
>
> Andrew Burton
> 26 Beacon Hill
> Newport, RI
> USA 02840
>
> +401 965 5260
> https://sites.go
able, sorry). There is a link to a downloadable copy of
> the C&C 37+ Owners Manual here:
> https://c-c-37-40.blogspot.com/p/blog-page_25.html
>
> Ken Heaton
> S/V Salazar - Can 54955
> C&C 37/40 XL - Hull # 67
> Cape Breton Island, Nova Scotia
>
> C&C 37/
#x27;em.
>>
>>> On Wed, Jun 15, 2022, 13:57 Edd Schillay via CnC-List
>>> wrote:
>>> Rob,
>>>
>>> I don’t have it in table format, but this may help you out:
>>>
>>> https://www.dropbox.com/s/ntlbe5eims3zd4u/37P
Anyone have the polars in a table format?
Thanks
Rob
Sent from my iPhone
Mine shorted out last year, was a random occurrence. Had to replace all is
well again.
Sent from my iPhone
> On Apr 26, 2022, at 9:44 AM, CHARLES SCHEAFFER via CnC-List
> wrote:
>
>
> Three dashes mean, "no-signal". Check all your wire connections and make
> sure the power and ground wi
Any recommendations / specs for a dodger for a C&C 37+?
Thanks,
Rob
Sent from my iPhone
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stu
gray pre-pex type flexible PVC tubing and fittings, a lot
> of ours have been found to be in poor shape, cracking and weeping
>
>> On Fri, Aug 6, 2021, 8:46 AM Rob Hamlin via CnC-List
>> wrote:
>> Hi
>> The cold water is not turning on. Any advice on replacing the
Hi
The cold water is not turning on. Any advice on replacing the cockpit shower
valve assembly /fixture what can be used?
-Rob
Sent from my iPhone
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use
> http://sites.google.com/site/andrewburtonyachtservices/
> +401 965-5260
>
>> On Jun 25, 2021, at 11:31, Rob Hamlin via CnC-List
>> wrote:
>>
>> Why would one want to have sea water come into the boat besides a head flush?
>>
>> Sent from my iPhone
&
Why would one want to have sea water come into the boat besides a head flush?
Sent from my iPhone
> On Jun 25, 2021, at 11:24 AM, ALAN BERGEN via CnC-List
> wrote:
>
>
> I have a foot pump for sea water and a foot pump for fresh water. I can also
> switch between fresh and sea water for my
Not my boat but an interesting series
Sent from my iPhone
> On Mar 27, 2021, at 9:24 AM, CHARLES SCHEAFFER via CnC-List
> wrote:
>
>
> Hey Joel,
> Sending pictures: You can start a Facebook page for free and post your
> pictures there, then send the list the link and we can see them.
>
Over the off season I found this channel on YouTube, very well done exploring
boats.
Recently did a profile on a C&C 40
https://youtu.be/PN7_uXD7mHs
Apologies if this has already been shared.
-Rob
C&C 37+
Sapphire
Sent from my iPhoneThanks to all of the subscribers that contributed to the
It’s the raw water side, I have done this by disconnecting each end of the heat
exchanger (raw water cooling) and taking a bilge pump and house and cycling
barnacle buster through the exchanger. I don’t know if there would be a need
to do this on the freshwater side.
Simplest and most complet
Andy, pleasure meeting you last evening before your way out to the islands.
Enjoy your trip
-Rob
Sapphire
C&C 37+
Sent from my iPhone
> On Aug 29, 2020, at 12:19 AM, Andrew Burton via CnC-List
> wrote:
>
> I installed a 12v Seafrost system on my 40. It was terrific. And so nice not
> t
> https://store.marinebeam.com/led-masthead-foredeck-combination-light/
>
> Josh Muckley
> S/V Sea Hawk
> 1989 C&C 37+
> Solomons, MD
>
>> On Sun, Aug 9, 2020, 20:07 Rob Hamlin via CnC-List
>> wrote:
>> Hi
>>
Hi
To avoid two trips up the stick, know of a replacement LED bulb in kind for the
mast head light?
Thanks
Rob
Sent from my iPhone
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. I
Being 36 the C&C 37+ is the 4th boat I have owned (Ranger 26, 33 and O’Day 34
Modified). I was fortunate to catch the sailing bug as a teenager racing with
my parents (always had power boats) neighbor on a Ranger 23.
Racing became part of my summers, and once you get known as a young kid that
I’m 36
Sent from my iPhone
> On Jul 14, 2020, at 8:36 PM, Thomas Perison via CnC-List
> wrote:
>
> 57.
> Therapy
> C&C 29-2
> Solomons MD
>
> Sent from my iPhone
>
>>> On Jul 14, 2020, at 8:28 PM, Joel Delamirande via CnC-List
>>> wrote:
>>>
>>
>> What is the youngest age in this gr
Most likely keel bolt threads corroded. Only way they could find good threads
is by using washers. Surprised they didn’t suggest a more complete repair.
-Rob
Sent from my iPhone
> On Jul 3, 2020, at 4:14 PM, David Swensen via CnC-List
> wrote:
>
>
> Wow. Thanks for the pic. I didn't real
kts, lots more fuel being burnt.
>
> Say 10 to 15 knots on the nose and some waves: 3200 RPM 6.0 to 6.4 kts.
>
>
>
>> On Tue, 23 Jun 2020 at 13:53, Rob Hamlin via CnC-List
>> wrote:
>> Hi
>> What is everyone’s motor/
Hi
What is everyone’s motor/ rpm optimal motoring speed?
Thanks
Rob
Sent from my iPhone
___
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
Peter did I see you on on block? I commented on your C&C I was the blue hull
37+ Sapphire. I had the same pleasure sailing home. However motor there
wasn’t as enjoyable.
-Rob
Sent from my iPhone
> On Jun 22, 2020, at 11:20 AM, Peter Cowenhoven via CnC-List
> wrote:
>
> I know the Land
Hi
I’m new owner of Sapphire (formally Kaylarah capt. Gary, and it’s a great boat)
Does anyone have experience replacing the bow chocks on a 37/40, the current
setup does not allow for easy on / off of mooring ride.
Thanks
Rob
Sent from my iPhone
___
36 matches
Mail list logo