Hoyt [EMAIL PROTECTED] on 28.11.2000 03:54:29
Bitte antworten an [EMAIL PROTECTED]
An: [EMAIL PROTECTED]
Kopie: (Blindkopie: Nigel Webber/RSD)
Thema:[Cooker] USB cpia video cam modules for 7.2?
USB cpia video cam modules for 7.2?
Has anyone compiled the cpia_usb.o and cpia.o
I have an AMD Athlon 1.1G, Asus A7V Motherboard, Tekram U160 SCSI controller,
IBM U160 SCSI drive with Elsa Gladiac Geforce2GTS and MDK7.2.
It all works fine far less problems than when trying to get same combination
running on W2K (which required me to
download loads of driver updates).
Hi
I am about ready to give up on Nvidia and go and get a supported card after the
hassles that I have
had with their drivers I did a default, recomended mandrake 7.2 install, and
after installing the Nvidia
drivers, I get the following errors when starting X (using startx after having
Hi
I selected 4.01 when prompted, but xfree defaulted to 3.3.6 - not sure why??
I have an Nvidia Geforce2 GTS graphics controller, I thought that perhaps
the OpenSource support for 4.01 did not exist and that was why?
Anyway, how can I make it such that 'startx' starts 401?
Nigel
Hi
I installed MDK7.2 on the following sys:
SCSI boot disk on a Tekram U160 controller
SCSI CD-ROM on same controller
IDE Harddisk (used as cheap storage)
Athlon on Asus A7V Motherboard
The install process worked brilliantly, it detected the symbios 1010 SCSI
controller and the
devices
Hi
On install of mdk 7.2 (final?), Diskdrake ate my Windows 2000 partition -
any suggestions? I did an expert install on a 13GB drive where Windows
occupied the first half of the drive. When I got to diskdrake, I created a
swap and a "/" partition in my free space and chose only to
choose grub, it should work!
I never got a choice at install time, it just gave me Lilo...
Will try changing it manually
Nigel
This is NOT 'going wrong', it is a simple warning message that is of
no consequence whatever.
Lilo works just fine off all drives and is not limited to just the
first drive (it used to be a long time ago).
Well it doesn't work until I unplug the IDE drive and then re-run lilo. If I
then
You don't have to unplug the IDE drive, btw. Just don't enable it in the
BIOS and everything works fine. But you'll still be able to access the IDE
in Linux, because it doesn't care about the bios settings once booting is
done.
Tried that too, still finds it during boot as the first device.
I've just installed 7.2 (beta?) on a Pentium III - 600 MHz, 20GB of HD, 256
MB of RAM... When I tryed to boot up the system, just after the prompt "Lilo
Boot:", I can see:
Sounds like your compressed kernel image has become corrupt, so it fails the CRC
check while being decompressed. I think
Hi
I have a linux box with a IBM Deskstar 75XP (one of the faster IDE HD's) on
ATA66 bus together with a Seagate X15 U160 SCSI HD on a Tekram SCSI Controller.
To get Linux on the scsi HD I had to first install it on the IDE HD (so I could
patch the kernel to support the SCSI Controller. The
Hi
I can an error during mandrake 7.2 boot (I have messed with it) saying that
devpts cant be mounted cause the filetype is unknown. There is an entry
in fstab that causes this error.
What is devpts ?? I assume that I am missing it in my kernel, but dont know
what option to include to get
When clicking on 'configure' in harddrake-disk, the partition tool
comes up. I think a way of setting DMA, 32bit access and so on for a
disk would also be nice (I have to put my hdparm tuning parameters into
rc.local, unless I missed another better way ? ).
I have had problems with HD tuning
Hi
I have installed Mandrake using a custom kernel, install went fine, but how the
heck to
I replace the custom kernel with my kernel so I can boot from my otherwise
unsupported SCSI
controller??
I had hoped that I could get to a console post install, mount the floppy and
copy the new kernel
Hi
I have created a mandrake custom install disk using blank.img, and a kernel
I have built with patches to support my SCSI hardware.
Does anyone know what features I should have in this ??
The problem that I was having the other day (Kernel Panic after boot disk found
scsi controllers) was
Hi people
I have been trying to install Mandrake (7.1 and 7.2) onto a system with a Tekram
DC390U3W SCSI adapter.
The system is Athlon Thunderbird based with 2 a single U160 IBM SCSI hard disk.
The card uses the sym53c1010 chipset for which support is not included in the
kernel, but it will
Hi
The menu really winds me up as well. I hate being boxed into using what
the Distro vendor thinks I should use - one of the reasons I moved to linux
was cause I wanted to freedom to config my system like *I* wanted it.
People are different, and work in different ways, and what works for the
17 matches
Mail list logo