I have a Heil Pro 30 microphone for sale. I am asking $165 shipped in the
continental US. It was used very little in a smoke free environment. I am
selling because I cannot get enough signal for the input of a KX3 without a
preamp. My space does not allow a preamp. If you would like I can send
I am trying to use a dynamic mic with my KX3 and have RFI on my output. I
am using the KX3 as a driver to a KM3KM amplifier looking to get about 400
to 500 watts output. I have a small pre-amp between the mike and the KX3.
I have modified the pre-amp to ground the lines from and two the pre-amp a
I am trying to use a dynamic mic on a KX3 and have RFI on my output. I am
using the KX3 as a driver to a KM3KM amplifier looking to get about 400 to
500 watts output. I have a small pre-amp between the mike and the KX3. I
have modified the pre-amp to ground the lines from and two the pre-amp at
What is the bias voltage provided? Is there a current limitation?
AD2F John
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I have a heil PR30 microphone I would like to use with a KX3. Is this
dymanic mike useable without a preamp, or do I need a preamp?
John, AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I have a Kx3, because I can take it to the field. But most of the time I
use it at the home shack. I recently got an amp to use with the KX3, but I
am getting tired of using the elecraft hand mike. I have a boom mount for
a microphone, but am finding out that the KX3 does not handle a dynamic
The unit was sold.
AD2F
John
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
Unit was sold
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support thi
Excellent Condition, light usage.
AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.n
I have my KPA500 for sale. My location is NJ
John, AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by
I am selling a KPA500 amp for sale. It is in excellent condition and work
fine.
AD2F
John
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@
Does anyone make an adapter cable that would connect a condenser microphone
with a USB connector to a KX3 mike plug?
John, AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.n
Havent seen any post for the KX3 for some time. Does that mean that they
have gone elsewhere?
AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:El
Does anyone know what the CAT commands that allow you to switch from VFO A
to VFO B?
I have the phone section of a band set to VFO A, and the CW section of that
band in VFO B. I have the filters and mode set for each section of the
band.
John, AD2F
_
Are there lines either in the AUX DB15, or one of the other connectors that
can be used to turn the AMP on in operate mode and later release it turning
it off.
John,
Ad2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/
I'm interested in remotely controlling my KX3 at the home location. I am
interested in knowing what hardware is needed to accomplish this using a
laptop at the remote location. I am interested in voice and cw operation.
John
__
Elec
I haven't read all the comments on this thread and thus may requesting
redundant info. My antenna, for 40 mtr's, is a 67' wire up about 25'. I
have 30' of 450 ohm ladder line connected to the end of the antenna and
bringing the antenna into my basement. So I guess you could say that I have
a non
Just got 220v to my shack. I put the 220V fuses into the KPA500 and
connected the amp to 220v using the ELecraft power cable. I was expecting
to do something to the transformer wiring in the KPA500, but did not see any
instruction to do so. Is that all there is to powering the KPA500 from
220vac
I failed to mention that I am using the KX3 with a PX3. That is the combo
that need the plug information to connect to the KPA500.
John
AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http:
I recently purchased a KPA500 with the cable to connect to the KX3. Can
someone tell me where the plugs on cable that connects the KPA100 amp plug
into the KX3? I have been told that that cable can be used to connect to
the KPA500 without the frequency control.
John
Ad2F
_
Anyone have a KPA500 you are interested in selling.
JohnAD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
I signed up for the digest, daily. I am not receiving it. I cannot find
out how to resign up on your current site.
John Pierce
AD2f
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Is there any special cableing required to use HRD software with a KX3?
John, AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth
Due the sale of my K3s, I am now selling my P3 for $480. I can supply any
photos you might like to see.
The unit is SN 3856 and was not a factory build. I was in Computer
engineering for 40 years and retired as the Quality Assurance Director for a
company that was building and supplying fl
The K3s has been sold.
John
AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Pl
Due to lack of use I am selling my Elecraft Equipment. Is a great rig and
worthy of consideration
Lightly used in a non-smoking environment
.K3S 160-6M 100 W Transceiver
.KFL3A 400Hz High Perf. CW/Data Filter
.Standard
Due to lack of use I am selling my Elecraft station. Is a great rig and
worthy of consideration
Lightly used in a non-smoking environment
. K3S 160-6M 100 W Transceiver
. KFL3A 400Hz High Perf. CW/Data Filter
. Standard
I have been trying to get the key on the KX3 to reverse. By that I mean the
left paddle produces dots and the right paddle produces dashes. Havent
found a way to do that. Any suggestions?
John
__
Elecraft mailing list
Home: http://
A great Purchase
. K3S 160-6M, 100 W Transceiver
Lightly used In a non-smoking environment
. P3 Panadapter, providing a great view of
the band
. KFL3A 400 Hz High Perf. CW/Data Filter
. Standard 2.7 kHz SSB Filter
.
For Sale K3s with MH2, Soft Tune Knob, KFV3A 400hz filter, KFL#A 2.7khz
and a P3 panadaptor with all connecting cables. Includes a Fred Cady K3
Manual and Operating Manuals. Price $3,250. Find contact info at QRZ. I
can send pictures and provide additional information.
AD2F John
_
I am looking at remote antenna tuners. I have seen several controllers for
the ICOM AH-4 tuner. My questions are about operation with a K3s.
1. Is there a limit to the time that 10w of RF can be sent to the AH-4
via the K3s Tune button?
2. All circuits specify a momentary switch, but do
I am looking at remote antenna tuners. I have seen several controllers for
the ICOM AH-4 tuner. My questions are about operation with a K3s.
1. Is there a limit to the time that 10w of RF can be sent to the AH-4
via the K3s Tune button?
2. All circuits specify a momentary switch, but do
Very nice, almost pristine, Astatic D-104 Silver Eagle. With W2ENY element
and Elecraft 8-pin connector installed. Chrome is fully intact, and you
have to search really hard to find any scuffs. Asking $100 with free
shipping.
__
Elecraft
Audio quality seems to be a very individual matter of taste. The language
of audiophiles looks to be rivaled only by that of wine experts in trying
to describe their taste. Radio communication audio doesn't have near that
complexity, but there does still seem to be a lot of personal taste
inv
Doug,
You might consider using a remote antenna tuner, like the SGC-230. I 've
used them for several all band antenna's, horizontal and vertical, and they
have worked quite well for me. Here is a link to some interesting and
thorough explanations and suggestions from SGC about various types and
35 matches
Mail list logo