1. Launch synaptic and goto “settings > Repositories”
2. click “other software > add”
3. insert this line in the box "deb http://archive.ubuntu.com/ubuntu/
raring main restricted universe multiverse"
4. click ok and close synaptic
5. in terminal “sudo apt-get update”
6. in terminal “sudo apt-get
Try CQRlog
http://www.cqrlog.com/
TR log linux port
http://www.kkn.net/trlinux/
here is a list of Linux software
http://radio.linux.org.au/
lot of them supports radio control, hamlib must be installed.
73 Martin, OK1RR
Dne 2.5.2014 01:47, Bill W2BLC napsal(a):
Gotta luv the K-Line, but I ju
+1
I second all asking Elecraft software available for Linux!
73
Martin, OK1RR
Dne 1.5.2014 18:49, David Cole napsal(a):
Would be nice if ALL Elecraft programs were also available in Linux...
__
Elecraft mailing list
Home: http://ma
I use a macro based on ZL2IFB's suggestions:
RT0;XT0;FR0;DV0;BW0040;SWT13;SWT13;UP4;SB1;BW0100;MN111;MP002;MN255;
It is assigned to PF1 (RIT button), you can do the job with K3 utils.
It copies the actual frequency to VFO B, moves the VFO 1 UP, sets on the
corresponding filters. Now you listen
Thanks a million, Eric!
73,
Martin, OK1RR
Dne 11.4.2014 21:26, Eric Swartz - WA6HHQ, Elecraft napsal(a):
IT takes us a little longer to get the Mac and Linux versions out after
the Windows utility is fully tested.
Eric
elecraft.com
On 4/11/2014 11:18 AM, Martin Kratoska wrote:
Windows only
Windows only, grrr.
73,
Martin, OK1RR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
P
The general disregard of Linux and other systems is ludicrous, in the
same way as the common computer illiteracy...
Any fee for software license can't replace the knowledge!
73,
Martin, OK1RR
Dne 24.3.2014 19:17, Jim Bennett napsal(a):
You might want to specify Mac or Windows - big difference
Jorge,
listen using RX B and transmit with RX/TX A with full QSK at QRQ speeds.
I am using macros inspired by ZL2IFB:
SPLIT
RT0;XT0;FR0;DV0;BW0040;SWT13;SWT13;UP4;SB1;BW0100;MN111;MP002;MN255;
UNSPLIT
SWT11;BW0040;SWT13;SWT13;FR0;SB0;RT0;XT0;LK0;LK$0;MN111;MP001;MN255;
73,
Martin, OK1RR
Dne
This one
http://ludens.cl/Electron/Ps20/Ps20.html
I tried it, it is almost perfect and very simple construction, rugged
enough. If you use a high quality toroidal transformer you will probably
need a soft start circuit (limiting the inrush current when switching on).
This one
http://www.warc.
I have some problems with my CW sidetone. When a strong (enormous) noise
or QRM occurs then my sidetone through QSK sounds too soft, rounded,
which complicates CW operation > 40 wpm. I dislike semi-QSK, I would
prefer QSK with more distinguished sidetone with sharp edges (~ more
"clicky"), my a
Sam,
I created an Elecraft folder in my directory and copied there the
utilities. Good idea is to use a file manager, I prefer Krusader because
it is a twin panel manager similar to Total Commander for Windows or
Norton Commander for DOS. This allows you to work with archives in the
same way
inion.
73,
Fred/N0AZZ
K3 Ser # 6730--KX3 # 2573--K2/100 # 6470-KAT100
P3/SVGA--KPA500--KAT500--W2
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Martin Kratoska
Sent: Wednesday, September 04, 2013 11:35 AM
To: elecraft@mailman.
Use Linux!
73,
Martin, OK1RR
Dne 4.9.2013 18:03, Fred Jensen napsal(a):
While OT, still important. There is a new scam, prevalent on the US
west coast but might be elsewhere. You receive a phone call from a
fast-talking dude who obliquely purports to be from Microsoft. His
pitch goes somethi
: Martin Kratoska
Sent: Wednesday, August 28, 2013 3:11 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Feature request - K3 RX EQ by mode
Hello,
it would be nice to have RX EQ by mode. Separate adjustment for CW
cutting the passband >800 Hz eliminates the fatigue from noise but is
rat
Hello,
it would be nice to have RX EQ by mode. Separate adjustment for CW
cutting the passband >800 Hz eliminates the fatigue from noise but is
rather impractical while (casually) operating SSB...
73,
Martin, OK1RR
K3 #7554
KPA500 #1565
KAT500 #849
P3 #2752
___
When tapping the ON button to power off the KPA500, the unit still
remains in ON state unless the rocker switch on the rear panel is used.
The box is still warm (very little), a quiet 50 Hz hum is barely
audible. Can be the KPA left in this state or must I use the bottom
rocker switch to power
Same here. Fortunately not a serious issue for me, I operate 99.9% CW.
73 Martin, OK1RR
K3 #7554
KPA500 #1565
KAT500 #849
P3 #2752
Dne 28.7.2013 18:07, G8DX napsal(a):
On my K3 #7482, when I adjust audio settings (comp, mic gain, TX gate) the
monitor audio in the headphones becomes loud and
Just finished the assembly but there is no RX output. There is noise,
DSP and filters seems OK but no signal, sometimes birdies. It seems like
a receiver without VFO signal. Any ideas?
73,
Martin, OK1RR
__
Elecraft mailing list
Home: h
Looking at the Rob Sherwood's receiver data table
http://www.sherweng.com/table.html
I discovered a remarkable fact: the K2's weakest point is the FILTER
ULTIMATE REJECTION. Sherwood says it is 80 dB only (and there are two
K2s) and it was confirmed by one of our top grade contesters and
DXpe
It should be mentioned (also on the Elecraft web site) that there is
Hamlib - an universal radio control software with full support of the
K2. It is Hamlib (a project of Frank Singleton, VK3FCS/KM5WS and
Stéphane Fillod, F8CFE) which can be found at
http://hamlib.sourceforge.net/
It can be us
It seems that the general settings of spam filtering is the culprit.
Some ISP blocking mass freemail providers (yahoo.com, aol.com etc.). An
email address change is the solution.
73 Martin OK1RR
F5UL napsal(a):
May be out of order on this reflector, but yesterday I had a mssage to post
conce
it would be quite interesting to know where is the culprit - if K2 or
the transverter
73 Martin OK1RR
Fraser Robertson napsal(a):
Adi, I've compared two latest spec. K2/100's with a FT1KMP, TS870, and a
home brew VFO/Xtal mixer rig, and the close in TX phase noise (unkeyed
carrier) of the K2'
I don't have a K2 yet but considering to obtain it very soon. I would be
interested to know if some reflectees compared receiver performace of
the TT Omni VI+ and K2 (DR for 2 kHz spacing and phase noise, birdies
etc). Another point of interest is the QSK - I know that the QSK of K2
is good but
23 matches
Mail list logo