Tramming the spindle will tell you how perpendicular the spindle centerline
is to that particular spot on the table surface. It will not tell you the
perpendicularity of the spindle centerline (or the Z axis) to the XY plane.
The actual level of the machine is almost irrelevent. If all the ma
Glue the needle in place - then cut it off
Sent via BlackBerry from T-Mobile
-Original Message-
From: "Ian W. Wright"
Date: Thu, 19 Nov 2009 19:44:45
To:
Subject: Re: [Emc-users] Mister for small mill
Gene,
I think your brain's working too hard!! You probably won't
have much success
Try a conventional cut for the finish pass on steel and see if you don't like
the finish better.
Sent via BlackBerry from T-Mobile
-Original Message-
From: Jon Elson
Date: Sat, 05 Sep 2009 13:41:39
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] What hardware should bu
Chris,
Argh - reading and thinking
Where is the automagic script?
Thanks - I will work on it :)
Stuart
Sent via BlackBerry from T-Mobile
-Original Message-
From: Chris Radek
Date: Mon, 29 Jun 2009 11:39:45
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] classicladder no
Doug,
I use emc in virtualbox on my laptop. It seems to run just fine for testing.
Virtualbox does not use the parallel port yet.
Stuart
Sent via BlackBerry from T-Mobile
-Original Message-
From: Douglas Pollard
Date: Sun, 10 May 2009 12:57:32
To: Enhanced Machine Controller (EMC)
S
This is not really a complaint as I am not sure if it is my fault or not. I can
log on from my blackberry but will shortly need to log on again. Also, I cannot
view the map. I tried to vote on one of the poles to see if it would work. I
received a 403 error.
This is likely my fault and I will wo
Design and build a link to connect the tailstock to the saddle. You will then
be able to push/pull to position as you wish
Stuart
Sent via BlackBerry from T-Mobile
-Original Message-
From: Jon Elson
Date: Sun, 29 Mar 2009 22:03:28
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc
Are you able to config youer cam output to ngc?
Sent via BlackBerry from T-Mobile
-Original Message-
From: jvanick
Date: Tue, 10 Mar 2009 10:25:57
To:
Subject: [Emc-users] Preffered way to add file extensions to the Axis user
interface?
My gcode generating application (VCarv
Sometimes - I can't get no satisfaction, but I try
Sent via BlackBerry from T-Mobile
-Original Message-
From: "Kent A. Reed"
Date: Fri, 09 Jan 2009 15:08:07
To:
Subject: [Emc-users] OT: the CNCer personality
Stuart Stevenson wrote:
>Reminds me of a line in the movie 'HOOK' - I w
The part looks exactly like the motion trace not the preview - at all overrides.
Sent via BlackBerry from T-Mobile
-Original Message-
From: Gene Heskett <[EMAIL PROTECTED]>
Date: Fri, 05 Dec 2008 20:10:27
To: Enhanced Machine Controller \(EMC\)
Subject: Re: [Emc-users] dahlih
On Friday
Why would the turned radius be ellitical?
Sent via BlackBerry from T-Mobile
-Original Message-
From: Leslie Newell <[EMAIL PROTECTED]>
Date: Sun, 09 Nov 2008 23:55:45
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Lathe support
Hi Jon,
> If you just want diameter read
Do a 'g92 z0' after you home the machine. This will reset the position. Restart
to confirm.
Sent via BlackBerry from T-Mobile
-Original Message-
From: "Len Shelton" <[EMAIL PROTECTED]>
Date: Fri, 7 Nov 2008 11:17:19
To: 'Enhanced Machine Controller \(EMC\)'
Subject: [Emc-users] Home Swi
12 matches
Mail list logo